ath5k: Put power_level where it belongs and rename it
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Sat Sep 29 10:59:30 EDT 2012
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=987af54fa93b1c01eb3a85229bc93dfe77e6d2e1
Commit: 987af54fa93b1c01eb3a85229bc93dfe77e6d2e1
Parent: 493ca5ef4ec8a7e8396d6ab26f48de66bdf73dca
Author: Nick Kossifidis <mickflemm at gmail.com>
AuthorDate: Sun Aug 5 22:35:36 2012 +0300
Committer: John W. Linville <linville at tuxdriver.com>
CommitDate: Fri Aug 10 15:26:57 2012 -0400
ath5k: Put power_level where it belongs and rename it
Put power_level to ah_txpower struct with the rest tx power infos and
also rename it to txp_requested to make more sense.
v2 make sure we don't memset it to zero on reset
Signed-off-by: Nick Kossifidis <mickflemm at gmail.com>
Signed-off-by: John W. Linville <linville at tuxdriver.com>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 2 +-
drivers/net/wireless/ath/ath5k/base.c | 5 +++--
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 4 ++--
drivers/net/wireless/ath/ath5k/phy.c | 14 +++++++++++---
4 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 64a453a..3150def 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1331,7 +1331,6 @@ struct ath5k_hw {
unsigned int nexttbtt; /* next beacon time in TU */
struct ath5k_txq *cabq; /* content after beacon */
- int power_level; /* Requested tx power in dBm */
bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
@@ -1425,6 +1424,7 @@ struct ath5k_hw {
/* Value in dB units */
s16 txp_cck_ofdm_pwr_delta;
bool txp_setup;
+ int txp_requested; /* Requested tx power in dBm */
} ah_txpower;
struct ath5k_nfcal_hist ah_nfcal_hist;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 8c4c040..9d48f9a 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -723,7 +723,7 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
ieee80211_get_hdrlen_from_skb(skb), padsize,
get_hw_packet_type(skb),
- (ah->power_level * 2),
+ (ah->ah_txpower.txp_requested * 2),
hw_rate,
info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
cts_rate, duration);
@@ -1778,7 +1778,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
ds->ds_data = bf->skbaddr;
ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
ieee80211_get_hdrlen_from_skb(skb), padsize,
- AR5K_PKT_TYPE_BEACON, (ah->power_level * 2),
+ AR5K_PKT_TYPE_BEACON,
+ (ah->ah_txpower.txp_requested * 2),
ieee80211_get_tx_rate(ah->hw, info)->hw_value,
1, AR5K_TXKEYIX_INVALID,
antenna, flags, 0, 0);
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 260e7dc..92ee3a0 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -207,8 +207,8 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
}
if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
- (ah->power_level != conf->power_level)) {
- ah->power_level = conf->power_level;
+ (ah->ah_txpower.txp_requested != conf->power_level)) {
+ ah->ah_txpower.txp_requested = conf->power_level;
/* Half dB steps */
ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 27ca993..01c90ed 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -3652,10 +3652,17 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
if (!ah->ah_txpower.txp_setup ||
(channel->hw_value != curr_channel->hw_value) ||
(channel->center_freq != curr_channel->center_freq)) {
- /* Reset TX power values */
+ /* Reset TX power values but preserve requested
+ * tx power from above */
+ int requested_txpower = ah->ah_txpower.txp_requested;
+
memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+
+ /* Restore TPC setting and requested tx power */
ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+ ah->ah_txpower.txp_requested = requested_txpower;
+
/* Calculate the powertable */
ret = ath5k_setup_channel_powertable(ah, channel,
ee_mode, type);
@@ -3802,8 +3809,9 @@ ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
* RF buffer settings on 5211/5212+ so that we
* properly set curve indices.
*/
- ret = ath5k_hw_txpower(ah, channel, ah->power_level ?
- ah->power_level * 2 : AR5K_TUNE_MAX_TXPOWER);
+ ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ?
+ ah->ah_txpower.txp_requested * 2 :
+ AR5K_TUNE_MAX_TXPOWER);
if (ret)
return ret;
More information about the linux-mtd-cvs
mailing list