mtd: bcm47part driver for BCM47XX chipsets
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Sat Sep 29 10:59:12 EDT 2012
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=3cf7f1314ed88598b640318f60d8d5fb40509f23
Commit: 3cf7f1314ed88598b640318f60d8d5fb40509f23
Parent: aa3c5dc52ee2fbfc3020fdc96eccb74f0fb2858d
Author: Rafał Miłecki <zajec5 at gmail.com>
AuthorDate: Thu Aug 30 07:41:16 2012 +0200
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Sat Sep 29 15:32:31 2012 +0100
mtd: bcm47part driver for BCM47XX chipsets
This driver provides parser detecting partitions on BCM47XX flash
memories. It has many differences in comparison to BCM63XX, like:
1) Different CFE with no more trivial MAGICs
2) More partitions types (board_data, ML, POT)
3) Supporting more than 1 flash on a device
which resulted in decision of writing new parser.
It uses generic mtd interface and was successfully tested with Netgear
WNDR4500 router which has 2 flash memories: serial one and NAND one.
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/Kconfig | 7 ++
drivers/mtd/Makefile | 1 +
drivers/mtd/bcm47xxpart.c | 202 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 210 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 27143e0..73fcbbe 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -148,6 +148,13 @@ config MTD_BCM63XX_PARTS
This provides partions parsing for BCM63xx devices with CFE
bootloaders.
+config MTD_BCM47XX_PARTS
+ tristate "BCM47XX partitioning support"
+ depends on BCM47XX
+ help
+ This provides partitions parser for devices based on BCM47xx
+ boards.
+
comment "User Modules And Translation Layers"
config MTD_CHAR
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index f901354..18a38e5 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
new file mode 100644
index 0000000..e06d782
--- /dev/null
+++ b/drivers/mtd/bcm47xxpart.c
@@ -0,0 +1,202 @@
+/*
+ * BCM47XX MTD partitioning
+ *
+ * Copyright © 2012 Rafał Miłecki <zajec5 at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-bcm47xx/nvram.h>
+
+/* 10 parts were found on sflash on Netgear WNDR4500 */
+#define BCM47XXPART_MAX_PARTS 12
+
+/*
+ * Amount of bytes we read when analyzing each block of flash memory.
+ * Set it big enough to allow detecting partition and reading important data.
+ */
+#define BCM47XXPART_BYTES_TO_READ 0x404
+
+/* Magics */
+#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
+#define POT_MAGIC1 0x54544f50 /* POTT */
+#define POT_MAGIC2 0x504f /* OP */
+#define ML_MAGIC1 0x39685a42
+#define ML_MAGIC2 0x26594131
+#define TRX_MAGIC 0x30524448
+
+struct trx_header {
+ uint32_t magic;
+ uint32_t length;
+ uint32_t crc32;
+ uint16_t flags;
+ uint16_t version;
+ uint32_t offset[3];
+} __packed;
+
+static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
+ u64 offset, uint32_t mask_flags)
+{
+ part->name = name;
+ part->offset = offset;
+ part->mask_flags = mask_flags;
+}
+
+static int bcm47xxpart_parse(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct mtd_partition *parts;
+ uint8_t i, curr_part = 0;
+ uint32_t *buf;
+ size_t bytes_read;
+ uint32_t offset;
+ uint32_t blocksize = 0x10000;
+ struct trx_header *trx;
+
+ /* Alloc */
+ parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
+ GFP_KERNEL);
+ buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+
+ /* Parse block by block looking for magics */
+ for (offset = 0; offset <= master->size - blocksize;
+ offset += blocksize) {
+ /* Nothing more in higher memory */
+ if (offset >= 0x2000000)
+ break;
+
+ if (curr_part > BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+ break;
+ }
+
+ /* Read beginning of the block */
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+ &bytes_read, (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+ offset);
+ continue;
+ }
+
+ /* CFE has small NVRAM at 0x400 */
+ if (buf[0x400 / 4] == NVRAM_HEADER) {
+ bcm47xxpart_add_part(&parts[curr_part++], "boot",
+ offset, MTD_WRITEABLE);
+ continue;
+ }
+
+ /* Standard NVRAM */
+ if (buf[0x000 / 4] == NVRAM_HEADER) {
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ offset, 0);
+ continue;
+ }
+
+ /*
+ * board_data starts with board_id which differs across boards,
+ * but we can use 'MPFR' (hopefully) magic at 0x100
+ */
+ if (buf[0x100 / 4] == BOARD_DATA_MAGIC) {
+ bcm47xxpart_add_part(&parts[curr_part++], "board_data",
+ offset, MTD_WRITEABLE);
+ continue;
+ }
+
+ /* POT(TOP) */
+ if (buf[0x000 / 4] == POT_MAGIC1 &&
+ (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) {
+ bcm47xxpart_add_part(&parts[curr_part++], "POT", offset,
+ MTD_WRITEABLE);
+ continue;
+ }
+
+ /* ML */
+ if (buf[0x010 / 4] == ML_MAGIC1 &&
+ buf[0x014 / 4] == ML_MAGIC2) {
+ bcm47xxpart_add_part(&parts[curr_part++], "ML", offset,
+ MTD_WRITEABLE);
+ continue;
+ }
+
+ /* TRX */
+ if (buf[0x000 / 4] == TRX_MAGIC) {
+ trx = (struct trx_header *)buf;
+
+ i = 0;
+ /* We have LZMA loader if offset[2] points to sth */
+ if (trx->offset[2]) {
+ bcm47xxpart_add_part(&parts[curr_part++],
+ "loader",
+ offset + trx->offset[i],
+ 0);
+ i++;
+ }
+
+ bcm47xxpart_add_part(&parts[curr_part++], "linux",
+ offset + trx->offset[i], 0);
+ i++;
+
+ /*
+ * Pure rootfs size is known and can be calculated as:
+ * trx->length - trx->offset[i]. We don't fill it as
+ * we want to have jffs2 (overlay) in the same mtd.
+ */
+ bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
+ offset + trx->offset[i], 0);
+ i++;
+
+ /*
+ * We have whole TRX scanned, skip to the next part. Use
+ * roundown (not roundup), as the loop will increase
+ * offset in next step.
+ */
+ offset = rounddown(offset + trx->length, blocksize);
+ continue;
+ }
+ }
+ kfree(buf);
+
+ /*
+ * Assume that partitions end at the beginning of the one they are
+ * followed by.
+ */
+ for (i = 0; i < curr_part - 1; i++)
+ parts[i].size = parts[i + 1].offset - parts[i].offset;
+ if (curr_part > 0)
+ parts[curr_part - 1].size =
+ master->size - parts[curr_part - 1].offset;
+
+ *pparts = parts;
+ return curr_part;
+};
+
+static struct mtd_part_parser bcm47xxpart_mtd_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = bcm47xxpart_parse,
+ .name = "bcm47xxpart",
+};
+
+static int __init bcm47xxpart_init(void)
+{
+ return register_mtd_parser(&bcm47xxpart_mtd_parser);
+}
+
+static void __exit bcm47xxpart_exit(void)
+{
+ deregister_mtd_parser(&bcm47xxpart_mtd_parser);
+}
+
+module_init(bcm47xxpart_init);
+module_exit(bcm47xxpart_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD partitioning for BCM47XX flash memories");
More information about the linux-mtd-cvs
mailing list