mtd: atmel nand: fix gpio missing request
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Sat Sep 29 10:59:04 EDT 2012
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=28446acb1f8268cda4b2076f72519534f84d6a36
Commit: 28446acb1f8268cda4b2076f72519534f84d6a36
Parent: aa6d01fa435a6f701128829f8d9d04208fd53176
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
AuthorDate: Thu Jul 12 10:31:08 2012 +0200
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Sat Sep 29 14:53:58 2012 +0100
mtd: atmel nand: fix gpio missing request
without this the gpio will not be muxed as a gpio by the current custom pinmux
or later by the pinctrl
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/nand/atmel_nand.c | 65 +++++++++++++++++++++++++++++++++++++++-
1 files changed, 63 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 6472755..9144557 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1399,7 +1399,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
if (pdev->dev.of_node) {
res = atmel_of_init_port(host, pdev->dev.of_node);
if (res)
- goto err_nand_ioremap;
+ goto err_ecc_ioremap;
} else {
memcpy(&host->board, pdev->dev.platform_data,
sizeof(struct atmel_nand_data));
@@ -1414,8 +1414,43 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->IO_ADDR_W = host->io_base;
nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
- if (gpio_is_valid(host->board.rdy_pin))
+ if (gpio_is_valid(host->board.rdy_pin)) {
+ res = gpio_request(host->board.rdy_pin, "nand_rdy");
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request rdy gpio %d\n",
+ host->board.rdy_pin);
+ goto err_ecc_ioremap;
+ }
+
+ res = gpio_direction_input(host->board.rdy_pin);
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request input direction rdy gpio %d\n",
+ host->board.rdy_pin);
+ goto err_ecc_ioremap;
+ }
+
nand_chip->dev_ready = atmel_nand_device_ready;
+ }
+
+ if (gpio_is_valid(host->board.enable_pin)) {
+ res = gpio_request(host->board.enable_pin, "nand_enable");
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request enable gpio %d\n",
+ host->board.enable_pin);
+ goto err_ecc_ioremap;
+ }
+
+ res = gpio_direction_output(host->board.enable_pin, 1);
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request output direction enable gpio %d\n",
+ host->board.enable_pin);
+ goto err_ecc_ioremap;
+ }
+ }
nand_chip->ecc.mode = host->board.ecc_mode;
nand_chip->chip_delay = 20; /* 20us command delay time */
@@ -1430,6 +1465,22 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
atmel_nand_enable(host);
if (gpio_is_valid(host->board.det_pin)) {
+ res = gpio_request(host->board.det_pin, "nand_det");
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request det gpio %d\n",
+ host->board.det_pin);
+ goto err_no_card;
+ }
+
+ res = gpio_direction_input(host->board.det_pin);
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request input direction det gpio %d\n",
+ host->board.det_pin);
+ goto err_no_card;
+ }
+
if (gpio_get_value(host->board.det_pin)) {
printk(KERN_INFO "No SmartMedia card inserted.\n");
res = -ENXIO;
@@ -1509,6 +1560,7 @@ err_no_card:
platform_set_drvdata(pdev, NULL);
if (host->dma_chan)
dma_release_channel(host->dma_chan);
+err_ecc_ioremap:
iounmap(host->io_base);
err_nand_ioremap:
kfree(host);
@@ -1534,6 +1586,15 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
pmecc_data_free(host);
}
+ if (gpio_is_valid(host->board.det_pin))
+ gpio_free(host->board.det_pin);
+
+ if (gpio_is_valid(host->board.enable_pin))
+ gpio_free(host->board.enable_pin);
+
+ if (gpio_is_valid(host->board.rdy_pin))
+ gpio_free(host->board.rdy_pin);
+
if (host->ecc)
iounmap(host->ecc);
if (host->pmecc_rom_base)
More information about the linux-mtd-cvs
mailing list