mtd: add device-tree support to spear_smi
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Mon Mar 26 20:59:19 EDT 2012
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=6551ab5d30d6bf0cea0c6cb294686ce3c7fc6042
Commit: 6551ab5d30d6bf0cea0c6cb294686ce3c7fc6042
Parent: f7e3dd8f48faad24334f7bea048ea59a2c766587
Author: Stefan Roese <sr at denx.de>
AuthorDate: Fri Mar 16 11:42:11 2012 +0100
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Tue Mar 27 01:01:21 2012 +0100
mtd: add device-tree support to spear_smi
This patch adds support to configure the SPEAr SMI driver via
device-tree instead of platform_data.
Signed-off-by: Stefan Roese <sr at denx.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
.../devicetree/bindings/mtd/spear_smi.txt | 31 ++++++
drivers/mtd/devices/spear_smi.c | 111 +++++++++++++++++--
include/linux/mtd/spear_smi.h | 5 +
3 files changed, 135 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt
new file mode 100644
index 0000000..7248aad
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt
@@ -0,0 +1,31 @@
+* SPEAr SMI
+
+Required properties:
+- compatible : "st,spear600-smi"
+- reg : Address range of the mtd chip
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the STMMAC interrupts
+- clock-rate : Functional clock rate of SMI in Hz
+
+Optional properties:
+- st,smi-fast-mode : Flash supports read in fast mode
+
+Example:
+
+ smi: flash at fc000000 {
+ compatible = "st,spear600-smi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+ clock-rate = <50000000>; /* 50MHz */
+
+ flash at f8000000 {
+ st,smi-fast-mode;
+ ...
+ };
+ };
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index f7f34fd..797d43c 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -33,9 +33,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/wait.h>
-
-/* max possible slots for serial-nor flash chip in the SMI controller */
-#define MAX_NUM_FLASH_CHIP 4
+#include <linux/of.h>
+#include <linux/of_address.h>
/* SMI clock rate */
#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */
@@ -748,9 +747,63 @@ err_probe:
return ret;
}
-static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
+
+#ifdef CONFIG_OF
+static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *pp = NULL;
+ const __be32 *addr;
+ u32 val;
+ int len;
+ int i = 0;
+
+ if (!np)
+ return -ENODEV;
+
+ of_property_read_u32(np, "clock-rate", &val);
+ pdata->clk_rate = val;
+
+ pdata->board_flash_info = devm_kzalloc(&pdev->dev,
+ sizeof(*pdata->board_flash_info),
+ GFP_KERNEL);
+
+ /* Fill structs for each subnode (flash device) */
+ while ((pp = of_get_next_child(np, pp))) {
+ struct spear_smi_flash_info *flash_info;
+
+ flash_info = &pdata->board_flash_info[i];
+ pdata->np[i] = pp;
+
+ /* Read base-addr and size from DT */
+ addr = of_get_property(pp, "reg", &len);
+ pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]);
+ pdata->board_flash_info->size = be32_to_cpup(&addr[1]);
+
+ if (of_get_property(pp, "st,smi-fast-mode", NULL))
+ pdata->board_flash_info->fast_mode = 1;
+
+ i++;
+ }
+
+ pdata->num_flashes = i;
+
+ return 0;
+}
+#else
+static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ return -ENOSYS;
+}
+#endif
+
+static int spear_smi_setup_banks(struct platform_device *pdev,
+ u32 bank, struct device_node *np)
{
struct spear_smi *dev = platform_get_drvdata(pdev);
+ struct mtd_part_parser_data ppdata = {};
struct spear_smi_flash_info *flash_info;
struct spear_smi_plat_data *pdata;
struct spear_snor_flash *flash;
@@ -816,11 +869,16 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n",
flash->mtd.erasesize, flash->mtd.erasesize / 1024);
+#ifndef CONFIG_OF
if (flash_info->partitions) {
parts = flash_info->partitions;
count = flash_info->nr_partitions;
}
- ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, parts, count);
+#endif
+ ppdata.of_node = np;
+
+ ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts,
+ count);
if (ret) {
dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret);
goto err_map;
@@ -847,17 +905,34 @@ err_probe:
*/
static int __devinit spear_smi_probe(struct platform_device *pdev)
{
- struct spear_smi_plat_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ struct spear_smi_plat_data *pdata = NULL;
struct spear_smi *dev;
struct resource *smi_base;
int irq, ret = 0;
int i;
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata < 0) {
- ret = -ENODEV;
- dev_err(&pdev->dev, "no platform data\n");
- goto err;
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: ERROR: no memory", __func__);
+ ret = -ENOMEM;
+ goto err;
+ }
+ pdev->dev.platform_data = pdata;
+ ret = spear_smi_probe_config_dt(pdev, np);
+ if (ret) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "no platform data\n");
+ goto err;
+ }
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata < 0) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "no platform data\n");
+ goto err;
+ }
}
smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -932,7 +1007,7 @@ static int __devinit spear_smi_probe(struct platform_device *pdev)
/* loop for each serial nor-flash which is connected to smi */
for (i = 0; i < dev->num_flashes; i++) {
- ret = spear_smi_setup_banks(pdev, i);
+ ret = spear_smi_setup_banks(pdev, i, pdata->np[i]);
if (ret) {
dev_err(&dev->pdev->dev, "bank setup failed\n");
goto err_bank_setup;
@@ -967,6 +1042,7 @@ err:
static int __devexit spear_smi_remove(struct platform_device *pdev)
{
struct spear_smi *dev;
+ struct spear_smi_plat_data *pdata;
struct spear_snor_flash *flash;
struct resource *smi_base;
int ret;
@@ -978,6 +1054,8 @@ static int __devexit spear_smi_remove(struct platform_device *pdev)
return -ENODEV;
}
+ pdata = dev_get_platdata(&pdev->dev);
+
/* clean up for all nor flash */
for (i = 0; i < dev->num_flashes; i++) {
flash = dev->flash[i];
@@ -1031,11 +1109,20 @@ int spear_smi_resume(struct platform_device *pdev)
return ret;
}
+#ifdef CONFIG_OF
+static const struct of_device_id spear_smi_id_table[] = {
+ { .compatible = "st,spear600-smi" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spear_smi_id_table);
+#endif
+
static struct platform_driver spear_smi_driver = {
.driver = {
.name = "smi",
.bus = &platform_bus_type,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(spear_smi_id_table),
},
.probe = spear_smi_probe,
.remove = __devexit_p(spear_smi_remove),
diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h
index 4e26b4e..8ae1726 100644
--- a/include/linux/mtd/spear_smi.h
+++ b/include/linux/mtd/spear_smi.h
@@ -14,6 +14,10 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+
+/* max possible slots for serial-nor flash chip in the SMI controller */
+#define MAX_NUM_FLASH_CHIP 4
/* macro to define partitions for flash devices */
#define DEFINE_PARTS(n, of, s) \
@@ -55,6 +59,7 @@ struct spear_smi_plat_data {
unsigned long clk_rate;
int num_flashes;
struct spear_smi_flash_info *board_flash_info;
+ struct device_node *np[MAX_NUM_FLASH_CHIP];
};
#endif /* __MTD_SPEAR_SMI_H */
More information about the linux-mtd-cvs
mailing list