mtd: spear_smi: initialize writebufsize

[Linux-MTD Mailing List]

Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=81fefdf2efa599df9e8b362bb04d5fe5a83bc353
Commit:     81fefdf2efa599df9e8b362bb04d5fe5a83bc353
Parent:     fcc44a07dae0af16e84e93425fc8afe642ddc603
Author:     Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
AuthorDate: Fri Feb 3 10:14:12 2012 +0200
Committer:  David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Tue Mar 27 00:23:13 2012 +0100

    mtd: spear_smi: initialize writebufsize
    
    The writebufsize concept was introduce by commit
    "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
    the maximum amount of data the device writes to the media at a time. This is
    an important parameter for UBIFS which is used during recovery and which
    basically defines how big a corruption caused by a power cut can be.
    
    Set writebufsize to the flash page size because it is the maximum amount of
    data it writes at a time.
    
    Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
    Acked-by: Stefan Roese <sr at denx.de>
    Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
 drivers/mtd/devices/spear_smi.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 5f42542..b80cb5b 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -845,6 +845,7 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
 	flash->mtd.size = flash_info->size;
 	flash->mtd.erasesize = flash_devices[flash_index].sectorsize;
 	flash->page_size = flash_devices[flash_index].pagesize;
+	flash->mtd.writebufsize = flash->page_size;
 	flash->erase_cmd = flash_devices[flash_index].erase_cmd;
 	flash->mtd._erase = spear_mtd_erase;
 	flash->mtd._read = spear_mtd_read;