mtd: doc2001plus: initialize writebufsize

[Linux-MTD Mailing List]

Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=71f60fbebf0f18dd4e855335a009efda251b1697
Commit:     71f60fbebf0f18dd4e855335a009efda251b1697
Parent:     cca84b569ebe3372b28949e00b0a3a17f87e2970
Author:     Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
AuthorDate: Fri Feb 3 09:43:14 2012 +0200
Committer:  David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Tue Mar 27 00:22:51 2012 +0100

    mtd: doc2001plus: initialize writebufsize
    
    The writebufsize concept was introduce by commit
    "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
    the maximum amount of data the device writes to the media at a time. This is
    an important parameter for UBIFS which is used during recovery and which
    basically defines how big a corruption caused by a power cut can be.
    
    Set it to be equivalent to mtd->writesize because this is the maximum amount
    of data the driver writes at a time.
    
    Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
    Cc: stable at kernel.org [2.6.38+]
    Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
 drivers/mtd/devices/doc2001plus.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 409fa31..c9fbadd 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -467,7 +467,7 @@ void DoCMilPlus_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->writesize = 512;
+	mtd->writebufsize = mtd->writesize = 512;
 	mtd->oobsize = 16;
 	mtd->owner = THIS_MODULE;
 	mtd->_erase = doc_erase;