mtd: sh_flctl: Restructure the hardware ECC handling
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Fri Jul 6 13:59:03 EDT 2012
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=6667a6d58e25d351d8fce7a628a8c9c139a8bdc9
Commit: 6667a6d58e25d351d8fce7a628a8c9c139a8bdc9
Parent: 623c55caa37203ece6b4450daa0d2d058255da30
Author: Bastian Hecht <hechtb at googlemail.com>
AuthorDate: Mon May 14 14:14:46 2012 +0200
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Fri Jul 6 18:17:04 2012 +0100
mtd: sh_flctl: Restructure the hardware ECC handling
There are multiple reasons for a rewrite:
- a race exists: when _4ECCEND is set, _4ECCFA may become true too
meanwhile, which is lost and a non-correctable error is treated as
correctable.
- the ECC statistics don't get properly propagated to the base code.
- empty pages would get marked as corrupted
The rewrite resolves the issues and I hope it gives a more explicit
code flow structure.
Signed-off-by: Bastian Hecht <hechtb at gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/nand/sh_flctl.c | 121 ++++++++++++++++++++++++++++--------------
include/linux/mtd/sh_flctl.h | 10 +++-
2 files changed, 88 insertions(+), 43 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 96e242ad..bc50e83 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -165,27 +165,56 @@ static void wait_wfifo_ready(struct sh_flctl *flctl)
timeout_error(flctl, __func__);
}
-static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
+static enum flctl_ecc_res_t wait_recfifo_ready
+ (struct sh_flctl *flctl, int sector_number)
{
uint32_t timeout = LOOP_TIMEOUT_MAX;
- int checked[4];
void __iomem *ecc_reg[4];
int i;
+ int state = FL_SUCCESS;
uint32_t data, size;
- memset(checked, 0, sizeof(checked));
-
+ /*
+ * First this loops checks in FLDTCNTR if we are ready to read out the
+ * oob data. This is the case if either all went fine without errors or
+ * if the bottom part of the loop corrected the errors or marked them as
+ * uncorrectable and the controller is given time to push the data into
+ * the FIFO.
+ */
while (timeout--) {
+ /* check if all is ok and we can read out the OOB */
size = readl(FLDTCNTR(flctl)) >> 24;
- if (size & 0xFF)
- return 0; /* success */
+ if ((size & 0xFF) == 4)
+ return state;
+
+ /* check if a correction code has been calculated */
+ if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
+ /*
+ * either we wait for the fifo to be filled or a
+ * correction pattern is being generated
+ */
+ udelay(1);
+ continue;
+ }
- if (readl(FL4ECCCR(flctl)) & _4ECCFA)
- return 1; /* can't correct */
+ /* check for an uncorrectable error */
+ if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
+ /* check if we face a non-empty page */
+ for (i = 0; i < 512; i++) {
+ if (flctl->done_buff[i] != 0xff) {
+ state = FL_ERROR; /* can't correct */
+ break;
+ }
+ }
- udelay(1);
- if (!(readl(FL4ECCCR(flctl)) & _4ECCEND))
+ if (state == FL_SUCCESS)
+ dev_dbg(&flctl->pdev->dev,
+ "reading empty sector %d, ecc error ignored\n",
+ sector_number);
+
+ writel(0, FL4ECCCR(flctl));
continue;
+ }
/* start error correction */
ecc_reg[0] = FL4ECCRESULT0(flctl);
@@ -194,28 +223,26 @@ static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
ecc_reg[3] = FL4ECCRESULT3(flctl);
for (i = 0; i < 3; i++) {
+ uint8_t org;
+ int index;
+
data = readl(ecc_reg[i]);
- if (data != INIT_FL4ECCRESULT_VAL && !checked[i]) {
- uint8_t org;
- int index;
-
- if (flctl->page_size)
- index = (512 * sector_number) +
- (data >> 16);
- else
- index = data >> 16;
-
- org = flctl->done_buff[index];
- flctl->done_buff[index] = org ^ (data & 0xFF);
- checked[i] = 1;
- }
- }
+ if (flctl->page_size)
+ index = (512 * sector_number) +
+ (data >> 16);
+ else
+ index = data >> 16;
+
+ org = flctl->done_buff[index];
+ flctl->done_buff[index] = org ^ (data & 0xFF);
+ }
+ state = FL_REPAIRABLE;
writel(0, FL4ECCCR(flctl));
}
timeout_error(flctl, __func__);
- return 1; /* timeout */
+ return FL_TIMEOUT; /* timeout */
}
static void wait_wecfifo_ready(struct sh_flctl *flctl)
@@ -259,20 +286,23 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
}
}
-static int read_ecfiforeg(struct sh_flctl *flctl, uint8_t *buff, int sector)
+static enum flctl_ecc_res_t read_ecfiforeg
+ (struct sh_flctl *flctl, uint8_t *buff, int sector)
{
int i;
+ enum flctl_ecc_res_t res;
unsigned long *ecc_buf = (unsigned long *)buff;
- void *fifo_addr = (void *)FLECFIFO(flctl);
- for (i = 0; i < 4; i++) {
- if (wait_recfifo_ready(flctl , sector))
- return 1;
- ecc_buf[i] = readl(fifo_addr);
- ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+ res = wait_recfifo_ready(flctl , sector);
+
+ if (res != FL_ERROR) {
+ for (i = 0; i < 4; i++) {
+ ecc_buf[i] = readl(FLECFIFO(flctl));
+ ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+ }
}
- return 0;
+ return res;
}
static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
@@ -367,6 +397,7 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
int sector, page_sectors;
+ enum flctl_ecc_res_t ecc_result;
page_sectors = flctl->page_size ? 4 : 1;
@@ -382,17 +413,27 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
start_translation(flctl);
for (sector = 0; sector < page_sectors; sector++) {
- int ret;
read_fiforeg(flctl, 512, 512 * sector);
- ret = read_ecfiforeg(flctl,
+ ecc_result = read_ecfiforeg(flctl,
&flctl->done_buff[mtd->writesize + 16 * sector],
sector);
- if (ret)
- flctl->hwecc_cant_correct[sector] = 1;
-
- writel(0x0, FL4ECCCR(flctl));
+ switch (ecc_result) {
+ case FL_REPAIRABLE:
+ dev_info(&flctl->pdev->dev,
+ "applied ecc on page 0x%x", page_addr);
+ flctl->mtd.ecc_stats.corrected++;
+ break;
+ case FL_ERROR:
+ dev_warn(&flctl->pdev->dev,
+ "page 0x%x contains corrupted data\n",
+ page_addr);
+ flctl->mtd.ecc_stats.failed++;
+ break;
+ default:
+ ;
+ }
}
wait_completion(flctl);
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 3feaae0..01e4b15 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -129,9 +129,15 @@
#define _4ECCEND (0x1 << 1) /* 4 symbols end */
#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
-#define INIT_FL4ECCRESULT_VAL 0x03FF03FF
#define LOOP_TIMEOUT_MAX 0x00010000
+enum flctl_ecc_res_t {
+ FL_SUCCESS,
+ FL_REPAIRABLE,
+ FL_ERROR,
+ FL_TIMEOUT
+};
+
struct sh_flctl {
struct mtd_info mtd;
struct nand_chip chip;
@@ -151,8 +157,6 @@ struct sh_flctl {
uint32_t flcmncr_base; /* base value of FLCMNCR */
uint32_t flintdmacr_base; /* irq enable bits */
- int hwecc_cant_correct[4];
-
unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
More information about the linux-mtd-cvs
mailing list