mtd: sh_flctl: Fix hardware ECC behaviour
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Fri Jul 6 13:59:02 EDT 2012
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=ef4ce0bcb3c91375d2bdefd7a0e2fead95c97620
Commit: ef4ce0bcb3c91375d2bdefd7a0e2fead95c97620
Parent: aa32d1f0601ac2f5f69520175b8d2cea42caa025
Author: Bastian Hecht <hechtb at googlemail.com>
AuthorDate: Mon May 14 14:14:43 2012 +0200
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Fri Jul 6 18:17:03 2012 +0100
mtd: sh_flctl: Fix hardware ECC behaviour
The flctl uses 10 bytes ECC data for every 512 bytes sector. This patch
makes the controller write all 40 bytes instead of 10 bytes only.
Signed-off-by: Bastian Hecht <hechtb at gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/nand/sh_flctl.c | 30 +++++++-----------------------
1 files changed, 7 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index b3666be..8633b5b 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -427,30 +427,20 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int page_sectors = flctl->page_size ? 4 : 1;
+ int i;
set_cmd_regs(mtd, NAND_CMD_READ0,
(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
empty_fifo(flctl);
- if (flctl->page_size) {
- int i;
- /* In case that the page size is 2k */
- for (i = 0; i < 16 * 3; i++)
- flctl->done_buff[i] = 0xFF;
-
- set_addr(mtd, 3 * 528 + 512, page_addr);
- writel(16, FLDTCNTR(flctl));
- start_translation(flctl);
- read_fiforeg(flctl, 16, 16 * 3);
- wait_completion(flctl);
- } else {
- /* In case that the page size is 512b */
- set_addr(mtd, 512, page_addr);
+ for (i = 0; i < page_sectors; i++) {
+ set_addr(mtd, (512 + 16) * i + 512 , page_addr);
writel(16, FLDTCNTR(flctl));
start_translation(flctl);
- read_fiforeg(flctl, 16, 0);
+ read_fiforeg(flctl, 16, 16 * i);
wait_completion(flctl);
}
}
@@ -495,18 +485,12 @@ static void execmd_write_oob(struct mtd_info *mtd)
int page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
- if (flctl->page_size) {
- sector = 3;
- page_sectors = 4;
- } else {
- sector = 0;
- page_sectors = 1;
- }
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
- for (; sector < page_sectors; sector++) {
+ for (sector = 0; sector < page_sectors; sector++) {
empty_fifo(flctl);
set_addr(mtd, sector * 528 + 512, page_addr);
writel(16, FLDTCNTR(flctl)); /* set read size */
More information about the linux-mtd-cvs
mailing list