mtd: sa1100-flash: convert to mtd_device_register()
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Tue May 24 21:59:11 EDT 2011
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=2fe2e24ead67530d624e0bb23da9f0bfdec44f8c
Commit: 2fe2e24ead67530d624e0bb23da9f0bfdec44f8c
Parent: 16b0eb154393831eddcf4f19cdca323611c86c9f
Author: Jamie Iles <jamie at jamieiles.com>
AuthorDate: Mon May 23 10:23:09 2011 +0100
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Wed May 25 02:22:03 2011 +0100
mtd: sa1100-flash: convert to mtd_device_register()
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.
Signed-off-by: Jamie Iles <jamie at jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/maps/Kconfig | 2 +-
drivers/mtd/maps/sa1100-flash.c | 21 ++++++---------------
2 files changed, 7 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 4cda05d..d949eee 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -347,7 +347,7 @@ config MTD_CDB89712
config MTD_SA1100
tristate "CFI Flash device mapped on StrongARM SA11x0"
- depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+ depends on MTD_CFI && ARCH_SA1100
help
This enables access to the flash chips on most platforms based on
the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index da875908..a9b5e0e 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -226,12 +226,7 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla
int i;
if (info->mtd) {
- if (info->nr_parts == 0)
- del_mtd_device(info->mtd);
-#ifdef CONFIG_MTD_PARTITIONS
- else
- del_mtd_partitions(info->mtd);
-#endif
+ mtd_device_unregister(info->mtd);
if (info->mtd != info->subdev[0].mtd)
mtd_concat_destroy(info->mtd);
}
@@ -363,28 +358,24 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
/*
* Partition selection stuff.
*/
-#ifdef CONFIG_MTD_PARTITIONS
nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
if (nr_parts > 0) {
info->parts = parts;
part_type = "dynamic";
- } else
-#endif
- {
+ } else {
parts = plat->parts;
nr_parts = plat->nr_parts;
part_type = "static";
}
- if (nr_parts == 0) {
+ if (nr_parts == 0)
printk(KERN_NOTICE "SA1100 flash: no partition info "
"available, registering whole flash\n");
- add_mtd_device(info->mtd);
- } else {
+ else
printk(KERN_NOTICE "SA1100 flash: using %s partition "
"definition\n", part_type);
- add_mtd_partitions(info->mtd, parts, nr_parts);
- }
+
+ mtd_device_register(info->mtd, parts, nr_parts);
info->nr_parts = nr_parts;
More information about the linux-mtd-cvs
mailing list