mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Fri Mar 11 10:59:07 EST 2011
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=38caf7f68e6b4ad84094095887a490e3fa2ec501
Commit: 38caf7f68e6b4ad84094095887a490e3fa2ec501
Parent: f8155a404db95656f1519b28fdb96cb68f8b2364
Author: Lei Wen <leiwen at marvell.com>
AuthorDate: Mon Feb 28 10:32:12 2011 +0800
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Fri Mar 11 14:22:50 2011 +0000
mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
Since we have rework the irq process, we don't need additional
delay in wait_for_event. Also write_cmd and __readid is also
discarded for the same reason.
Signed-off-by: Lei Wen <leiwen at marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
Acked-by: Eric Miao <eric.y.miao at gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 77 +---------------------------------------
1 files changed, 1 insertions(+), 76 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 3264b1d..be0aa44 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -258,25 +258,6 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
nand_writel(info, NDTR1CS0, ndtr1);
}
-#define WAIT_EVENT_TIMEOUT 10
-
-static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
-{
- int timeout = WAIT_EVENT_TIMEOUT;
- uint32_t ndsr;
-
- while (timeout--) {
- ndsr = nand_readl(info, NDSR) & NDSR_MASK;
- if (ndsr & event) {
- nand_writel(info, NDSR, ndsr);
- return 0;
- }
- udelay(10);
- }
-
- return -ETIMEDOUT;
-}
-
static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
@@ -414,35 +395,6 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
nand_writel(info, NDCR, ndcr | int_mask);
}
-/* NOTE: it is a must to set ND_RUN firstly, then write command buffer
- * otherwise, it does not work
- */
-static int write_cmd(struct pxa3xx_nand_info *info)
-{
- uint32_t ndcr;
-
- /* clear status bits and run */
- nand_writel(info, NDSR, NDSR_MASK);
-
- ndcr = info->reg_ndcr;
-
- ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
- ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
- ndcr |= NDCR_ND_RUN;
-
- nand_writel(info, NDCR, ndcr);
-
- if (wait_for_event(info, NDSR_WRCMDREQ)) {
- printk(KERN_ERR "timed out writing command\n");
- return -ETIMEDOUT;
- }
-
- nand_writel(info, NDCB0, info->ndcb0);
- nand_writel(info, NDCB0, info->ndcb1);
- nand_writel(info, NDCB0, info->ndcb2);
- return 0;
-}
-
static void handle_data_pio(struct pxa3xx_nand_info *info)
{
switch (info->state) {
@@ -778,33 +730,6 @@ static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
return 0;
}
-static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
-{
- const struct pxa3xx_nand_cmdset *cmdset = info->cmdset;
- uint32_t ndcr;
- uint8_t id_buff[8];
-
- prepare_other_cmd(info, cmdset->read_id);
-
- /* Send command */
- if (write_cmd(info))
- goto fail_timeout;
-
- /* Wait for CMDDM(command done successfully) */
- if (wait_for_event(info, NDSR_RDDREQ))
- goto fail_timeout;
-
- __raw_readsl(info->mmio_base + NDDB, id_buff, 2);
- *id = id_buff[0] | (id_buff[1] << 8);
- return 0;
-
-fail_timeout:
- ndcr = nand_readl(info, NDCR);
- nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
- udelay(10);
- return -ETIMEDOUT;
-}
-
static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
const struct pxa3xx_nand_flash *f)
{
@@ -857,7 +782,7 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32;
info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- /* set info fields needed to __readid */
+ /* set info fields needed to read id */
info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
info->reg_ndcr = ndcr;
info->cmdset = &default_cmdset;
More information about the linux-mtd-cvs
mailing list