mtd: atmel_nand: Add DMA support to access Nandflash
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Fri Mar 11 10:59:03 EST 2011
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=cbc6c5e73dfa598b1fa5e67cef28096186e2a7cd
Commit: cbc6c5e73dfa598b1fa5e67cef28096186e2a7cd
Parent: 7f53f12f02b0b60af373a07fcac62b578381308e
Author: Hong Xu <hong.xu at atmel.com>
AuthorDate: Tue Jan 18 14:36:05 2011 +0800
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Fri Mar 11 14:22:42 2011 +0000
mtd: atmel_nand: Add DMA support to access Nandflash
Some SAM9 chips have the ability to perform DMA between CPU and SMC controller.
This patch adds DMA support for SAM9RL, SAM9G45, SSAM9G46,AM9M10, SAM9M11.
Signed-off-by: Hong Xu <hong.xu at atmel.com>
Tested-by: Ryan Mallon <ryan at bluewatersys.com>
Acked-by: Ryan Mallon <ryan at bluewatersys.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/nand/atmel_nand.c | 166 ++++++++++++++++++++++++++++++++++++++--
1 files changed, 157 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index ccce0f0..6fae04b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -48,6 +48,9 @@
#define no_ecc 0
#endif
+static int use_dma = 1;
+module_param(use_dma, int, 0);
+
static int on_flash_bbt = 0;
module_param(on_flash_bbt, int, 0);
@@ -89,11 +92,20 @@ struct atmel_nand_host {
struct nand_chip nand_chip;
struct mtd_info mtd;
void __iomem *io_base;
+ dma_addr_t io_phys;
struct atmel_nand_data *board;
struct device *dev;
void __iomem *ecc;
+
+ struct completion comp;
+ struct dma_chan *dma_chan;
};
+static int cpu_has_dma(void)
+{
+ return cpu_is_at91sam9rl() || cpu_is_at91sam9g45();
+}
+
/*
* Enable NAND.
*/
@@ -150,7 +162,7 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
/*
* Minimal-overhead PIO for data access.
*/
-static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -164,7 +176,7 @@ static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
}
-static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -178,6 +190,121 @@ static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
}
+static void dma_complete_func(void *completion)
+{
+ complete(completion);
+}
+
+static int atmel_nand_dma_op(struct mtd_info *mtd, void *buf, int len,
+ int is_read)
+{
+ struct dma_device *dma_dev;
+ enum dma_ctrl_flags flags;
+ dma_addr_t dma_src_addr, dma_dst_addr, phys_addr;
+ struct dma_async_tx_descriptor *tx = NULL;
+ dma_cookie_t cookie;
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+ void *p = buf;
+ int err = -EIO;
+ enum dma_data_direction dir = is_read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ if (buf >= high_memory) {
+ struct page *pg;
+
+ if (((size_t)buf & PAGE_MASK) !=
+ ((size_t)(buf + len - 1) & PAGE_MASK)) {
+ dev_warn(host->dev, "Buffer not fit in one page\n");
+ goto err_buf;
+ }
+
+ pg = vmalloc_to_page(buf);
+ if (pg == 0) {
+ dev_err(host->dev, "Failed to vmalloc_to_page\n");
+ goto err_buf;
+ }
+ p = page_address(pg) + ((size_t)buf & ~PAGE_MASK);
+ }
+
+ dma_dev = host->dma_chan->device;
+
+ flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP |
+ DMA_COMPL_SKIP_DEST_UNMAP;
+
+ phys_addr = dma_map_single(dma_dev->dev, p, len, dir);
+ if (dma_mapping_error(dma_dev->dev, phys_addr)) {
+ dev_err(host->dev, "Failed to dma_map_single\n");
+ goto err_buf;
+ }
+
+ if (is_read) {
+ dma_src_addr = host->io_phys;
+ dma_dst_addr = phys_addr;
+ } else {
+ dma_src_addr = phys_addr;
+ dma_dst_addr = host->io_phys;
+ }
+
+ tx = dma_dev->device_prep_dma_memcpy(host->dma_chan, dma_dst_addr,
+ dma_src_addr, len, flags);
+ if (!tx) {
+ dev_err(host->dev, "Failed to prepare DMA memcpy\n");
+ goto err_dma;
+ }
+
+ init_completion(&host->comp);
+ tx->callback = dma_complete_func;
+ tx->callback_param = &host->comp;
+
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(host->dev, "Failed to do DMA tx_submit\n");
+ goto err_dma;
+ }
+
+ dma_async_issue_pending(host->dma_chan);
+ wait_for_completion(&host->comp);
+
+ err = 0;
+
+err_dma:
+ dma_unmap_single(dma_dev->dev, phys_addr, len, dir);
+err_buf:
+ if (err != 0)
+ dev_warn(host->dev, "Fall back to CPU I/O\n");
+ return err;
+}
+
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+
+ if (use_dma && len >= mtd->oobsize)
+ if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
+ return;
+
+ if (host->board->bus_width_16)
+ atmel_read_buf16(mtd, buf, len);
+ else
+ atmel_read_buf8(mtd, buf, len);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+
+ if (use_dma && len >= mtd->oobsize)
+ if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
+ return;
+
+ if (host->board->bus_width_16)
+ atmel_write_buf16(mtd, buf, len);
+ else
+ atmel_write_buf8(mtd, buf, len);
+}
+
/*
* Calculate HW ECC
*
@@ -398,6 +525,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ host->io_phys = (dma_addr_t)mem->start;
+
host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
if (host->io_base == NULL) {
printk(KERN_ERR "atmel_nand: ioremap failed\n");
@@ -448,14 +577,11 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 20; /* 20us command delay time */
- if (host->board->bus_width_16) { /* 16-bit bus width */
+ if (host->board->bus_width_16) /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
- nand_chip->read_buf = atmel_read_buf16;
- nand_chip->write_buf = atmel_write_buf16;
- } else {
- nand_chip->read_buf = atmel_read_buf;
- nand_chip->write_buf = atmel_write_buf;
- }
+
+ nand_chip->read_buf = atmel_read_buf;
+ nand_chip->write_buf = atmel_write_buf;
platform_set_drvdata(pdev, host);
atmel_nand_enable(host);
@@ -473,6 +599,22 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->options |= NAND_USE_FLASH_BBT;
}
+ if (cpu_has_dma() && use_dma) {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ host->dma_chan = dma_request_channel(mask, 0, NULL);
+ if (!host->dma_chan) {
+ dev_err(host->dev, "Failed to request DMA channel\n");
+ use_dma = 0;
+ }
+ }
+ if (use_dma)
+ dev_info(host->dev, "Using DMA for NAND access.\n");
+ else
+ dev_info(host->dev, "No DMA support for NAND access.\n");
+
/* first scan to find the device and get the page size */
if (nand_scan_ident(mtd, 1, NULL)) {
res = -ENXIO;
@@ -555,6 +697,8 @@ err_scan_ident:
err_no_card:
atmel_nand_disable(host);
platform_set_drvdata(pdev, NULL);
+ if (host->dma_chan)
+ dma_release_channel(host->dma_chan);
if (host->ecc)
iounmap(host->ecc);
err_ecc_ioremap:
@@ -578,6 +722,10 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
if (host->ecc)
iounmap(host->ecc);
+
+ if (host->dma_chan)
+ dma_release_channel(host->dma_chan);
+
iounmap(host->io_base);
kfree(host);
More information about the linux-mtd-cvs
mailing list