mtd: cleanup nand.h
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Sun Oct 24 20:59:09 EDT 2010
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=a0491fc4d4b584ddc23f412e9a57b05d66a21263
Commit: a0491fc4d4b584ddc23f412e9a57b05d66a21263
Parent: 766f271a63d1ee7caed8030736e6aed253d02073
Author: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
AuthorDate: Tue Oct 5 12:41:01 2010 +0200
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Mon Oct 25 00:56:32 2010 +0100
mtd: cleanup nand.h
- *var instead of * var
- proper multiline comment
- func(args) instead of func (args)
- 80 lines
So from
|total: 2 errors, 37 warnings, 654 lines checked
we got to one warning.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
include/linux/mtd/nand.h | 155 +++++++++++++++++++++++++++++-----------------
1 files changed, 99 insertions(+), 56 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 0238665..acd0b50 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -27,15 +27,17 @@
struct mtd_info;
struct nand_flash_dev;
/* Scan and identify a NAND device */
-extern int nand_scan (struct mtd_info *mtd, int max_chips);
-/* Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type */
+extern int nand_scan(struct mtd_info *mtd, int max_chips);
+/*
+ * Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type.
+ */
extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
struct nand_flash_dev *table);
extern int nand_scan_tail(struct mtd_info *mtd);
/* Free resources held by the NAND device */
-extern void nand_release (struct mtd_info *mtd);
+extern void nand_release(struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
@@ -49,7 +51,8 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* The maximum number of NAND chips in an array */
#define NAND_MAX_CHIPS 8
-/* This constant declares the max. oobsize / page, which
+/*
+ * This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
@@ -153,9 +156,10 @@ typedef enum {
#define NAND_GET_DEVICE 0x80
-/* Option constants for bizarre disfunctionality and real
-* features
-*/
+/*
+ * Option constants for bizarre disfunctionality and real
+ * features.
+ */
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
/* Buswitdh is 16 bit */
@@ -166,19 +170,27 @@ typedef enum {
#define NAND_CACHEPRG 0x00000008
/* Chip has copy back function */
#define NAND_COPYBACK 0x00000010
-/* AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information */
+/*
+ * AND Chip which has 4 banks and a confusing page / block
+ * assignment. See Renesas datasheet for further information.
+ */
#define NAND_IS_AND 0x00000020
-/* Chip has a array of 4 pages which can be read without
- * additional ready /busy waits */
+/*
+ * Chip has a array of 4 pages which can be read without
+ * additional ready /busy waits.
+ */
#define NAND_4PAGE_ARRAY 0x00000040
-/* Chip requires that BBT is periodically rewritten to prevent
+/*
+ * Chip requires that BBT is periodically rewritten to prevent
* bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others. */
+ * This happens with the Renesas AG-AND chips, possibly others.
+ */
#define BBT_AUTO_REFRESH 0x00000080
-/* Chip does not require ready check on read. True
+/*
+ * Chip does not require ready check on read. True
* for all large page devices, as they do not support
- * autoincrement.*/
+ * autoincrement.
+ */
#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
@@ -213,8 +225,10 @@ typedef enum {
#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00020000
-/* This option is defined if the board driver allocates its own buffers
- (e.g. because it needs them DMA-coherent */
+/*
+ * This option is defined if the board driver allocates its own buffers
+ * (e.g. because it needs them DMA-coherent).
+ */
#define NAND_OWN_BUFFERS 0x00040000
/* Chip may not exist, so silence any errors in scan */
#define NAND_SCAN_SILENT_NODEV 0x00080000
@@ -304,8 +318,9 @@ struct nand_onfi_params {
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* @active: the mtd device which holds the controller currently
- * @wq: wait queue to sleep on if a NAND operation is in progress
- * used instead of the per chip wait queue when a hw controller is available
+ * @wq: wait queue to sleep on if a NAND operation is in
+ * progress used instead of the per chip wait queue
+ * when a hw controller is available.
*/
struct nand_hw_control {
spinlock_t lock;
@@ -329,9 +344,11 @@ struct nand_hw_control {
* @correct: function for ecc correction, matching to ecc generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator requirements
+ * @read_page: function to read a page according to the ecc generator
+ * requirements.
* @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator requirements
+ * @write_page: function to write a page according to the ecc generator
+ * requirements.
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
@@ -393,13 +410,16 @@ struct nand_buffers {
/**
* struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
- * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
+ * flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
+ * flash device.
* @read_byte: [REPLACEABLE] read one byte from the chip
* @read_word: [REPLACEABLE] read one word from the chip
* @write_buf: [REPLACEABLE] write data from the buffer to the chip
* @read_buf: [REPLACEABLE] read data from the chip into the buffer
- * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data
+ * @verify_buf: [REPLACEABLE] verify buffer contents against the chip
+ * data.
* @select_chip: [REPLACEABLE] select chip nr
* @block_bad: [REPLACEABLE] check, if the block is bad
* @block_markbad: [REPLACEABLE] mark the block bad
@@ -409,45 +429,60 @@ struct nand_buffers {
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
- * If set to NULL no access to ready/busy is available and the ready/busy information
- * is read from the chip status register
- * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip
- * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * device ready/busy line. If set to NULL no access to
+ * ready/busy is available and the ready/busy information
+ * is read from the chip status register.
+ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing
+ * commands to the chip.
+ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
+ * ready.
* @ecc: [BOARDSPECIFIC] ecc control ctructure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
* @ops: oob operation operands
- * @erase_cmd: [INTERN] erase command write function, selectable due to AND support
+ * @erase_cmd: [INTERN] erase command write function, selectable due
+ * to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering
+ * data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
* @oob_poi: poison value buffer
- * @page_shift: [INTERN] number of address bits in a page (column address bits)
+ * @page_shift: [INTERN] number of address bits in a page (column
+ * address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
* @chip_shift: [INTERN] number of address bits in one chip
- * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
- * special functionality. See the defines for further explanation
- * @badblockpos: [INTERN] position of the bad block marker in the oob area
+ * @options: [BOARDSPECIFIC] various chip options. They can partly
+ * be set to inform nand_scan about special functionality.
+ * See the defines for further explanation.
+ * @badblockpos: [INTERN] position of the bad block marker in the oob
+ * area.
* @cellinfo: [INTERN] MLC/multichip data from chip ident
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
- * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
+ * @pagebuf: [INTERN] holds the pagenumber which is currently in
+ * data_buf.
* @subpagesize: [INTERN] holds the subpagesize
- * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), non 0 if ONFI supported
- * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is supported, 0 otherwise
+ * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
+ * non 0 if ONFI supported.
+ * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
+ * supported, 0 otherwise.
* @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbt: [INTERN] bad block table pointer
- * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
+ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash
+ * lookup.
* @bbt_md: [REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @controller: [REPLACEABLE] a pointer to a hardware controller structure
- * which is shared among multiple independend devices
+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
+ * bad block scan.
+ * @controller: [REPLACEABLE] a pointer to a hardware controller
+ * structure which is shared among multiple independend
+ * devices.
* @priv: [OPTIONAL] pointer to private chip date
- * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks
- * (determine if errors are correctable)
+ * @errstat: [OPTIONAL] hardware specific function to perform
+ * additional error status checks (determine if errors are
+ * correctable).
* @write_page: [REPLACEABLE] High-level page write function
*/
@@ -457,24 +492,32 @@ struct nand_chip {
uint8_t (*read_byte)(struct mtd_info *mtd);
u16 (*read_word)(struct mtd_info *mtd);
- void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
- int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf,
+ int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf,
+ int len);
+ int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf,
+ int len);
void (*select_chip)(struct mtd_info *mtd, int chip);
- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs,
+ int getchip);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
unsigned int ctrl);
int (*init_size)(struct mtd_info *mtd,
struct nand_chip *this, u8 *id_data);
int (*dev_ready)(struct mtd_info *mtd);
- void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
- int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr);
+ int (*waitfunc)(struct mtd_info *mtd,
+ struct nand_chip *this);
void (*erase_cmd)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw);
+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this,
+ int state, int status, int page);
+ int (*write_page)(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int page,
+ int cached, int raw);
int chip_delay;
unsigned int options;
@@ -557,7 +600,7 @@ struct nand_flash_dev {
*/
struct nand_manufacturers {
int id;
- char * name;
+ char *name;
};
extern struct nand_flash_dev nand_flash_ids[];
@@ -570,7 +613,7 @@ extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt);
extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, uint8_t * buf);
+ size_t *retlen, uint8_t *buf);
/**
* struct platform_nand_chip - chip level device structure
More information about the linux-mtd-cvs
mailing list