mtd: nand: split out ECC module

[Linux-MTD Mailing List]

Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=e5f710cfc6947e64672b7205f7992515868c7782
Commit:     e5f710cfc6947e64672b7205f7992515868c7782
Parent:     ca7081d96e39ea276892f0577f9cf37568547e88
Author:     Maxim Levitsky <maximlevitsky at gmail.com>
AuthorDate: Fri Mar 19 17:22:54 2010 +0200
Committer:  David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Fri Mar 26 15:26:27 2010 +0000

    mtd: nand: split out ECC module
    
    This way drivers could use ecc routines without depedency on whole nand
    
    Signed-off-by: Maxim Levitsky <maximlevitsky at gmail.com>
    Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
 drivers/mtd/Kconfig       |    3 ++-
 drivers/mtd/nand/Kconfig  |   19 ++++++++++++-------
 drivers/mtd/nand/Makefile |    3 ++-
 3 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index dbee14d..e652080 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -307,8 +307,9 @@ config SSFDC
 
 config SM_FTL
 	tristate "SmartMedia/xD new translation layer"
-	depends on EXPERIMENTAL && BLOCK && MTD_NAND
+	depends on EXPERIMENTAL && BLOCK
 	select MTD_BLKDEVS
+	select MTD_NAND_ECC
 	help
 	  This enables new and very EXPERMENTAL support for SmartMedia/xD
 	  FTL (Flash translation layer).
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 164bd56..b712aed 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -2,11 +2,23 @@ menuconfig MTD_NAND
 	tristate "NAND Device Support"
 	depends on MTD
 	select MTD_NAND_IDS
+	select MTD_NAND_ECC
 	help
 	  This enables support for accessing all type of NAND flash
 	  devices. For further information see
 	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
 
+config MTD_NAND_ECC
+	tristate
+
+config MTD_NAND_ECC_SMC
+	bool "NAND ECC Smart Media byte order"
+	depends on MTD_NAND_ECC
+	default n
+	help
+	  Software ECC according to the Smart Media Specification.
+	  The original Linux implementation had byte 0 and 1 swapped.
+
 if MTD_NAND
 
 config MTD_NAND_VERIFY_WRITE
@@ -18,13 +30,6 @@ config MTD_NAND_VERIFY_WRITE
 	  device thinks the write was successful, a bit could have been
 	  flipped accidentally due to device wear or something else.
 
-config MTD_NAND_ECC_SMC
-	bool "NAND ECC Smart Media byte order"
-	default n
-	help
-	  Software ECC according to the Smart Media Specification.
-	  The original Linux implementation had byte 0 and 1 swapped.
-
 config MTD_SM_COMMON
 	tristate
 	default n
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5fbd1f8..04bccf9 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -2,7 +2,8 @@
 # linux/drivers/nand/Makefile
 #
 
-obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
+obj-$(CONFIG_MTD_NAND)			+= nand.o
+obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
 obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o