nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Tue Aug 10 21:59:01 EDT 2010
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=7cfffac06ca0d45040db228ce1835f5cf8623916
Commit: 7cfffac06ca0d45040db228ce1835f5cf8623916
Parent: 8ae61ebddba8a0cf96f61e592acaa12800e50727
Author: Chuanxiao Dong <chuanxiao.dong at intel.com>
AuthorDate: Tue Aug 10 00:16:51 2010 +0800
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Wed Aug 11 00:28:40 2010 +0100
nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
Signed-off-by: Chuanxiao Dong <chuanxiao.dong at intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/nand/denali.c | 208 +++++++++------------------------------------
drivers/mtd/nand/denali.h | 18 ----
2 files changed, 42 insertions(+), 184 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index e4462c0..f59dd03 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -119,9 +119,6 @@ static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
INTR_STATUS2__RST_COMP,
INTR_STATUS3__RST_COMP};
-/* specifies the debug level of the driver */
-static int nand_debug_level;
-
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali,
@@ -130,8 +127,6 @@ static void denali_irq_enable(struct denali_nand_info *denali,
uint32_t int_mask);
static uint32_t read_interrupt_status(struct denali_nand_info *denali);
-#define DEBUG_DENALI 0
-
/* Certain operations for the denali NAND controller use
* an indexed mode to read/write data. The operation is
* performed by writing the address value of the command
@@ -181,11 +176,6 @@ static void read_status(struct denali_nand_info *denali)
/* update buffer with status value */
write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
-
-#if DEBUG_DENALI
- printk(KERN_INFO "device reporting status value of 0x%2x\n",
- denali->buf.buf[0]);
-#endif
}
/* resets a specific device connected to the core */
@@ -204,7 +194,7 @@ static void reset_bank(struct denali_nand_info *denali)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status & operation_timeout[denali->flash_bank])
- printk(KERN_ERR "reset bank failed.\n");
+ dev_err(&denali->dev->dev, "reset bank failed.\n");
}
/* Reset the flash controller */
@@ -212,7 +202,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
uint32_t i;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
@@ -228,7 +218,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
;
if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
operation_timeout[i])
- nand_dbg_print(NAND_DBG_WARN,
+ dev_dbg(&denali->dev->dev,
"NAND Reset operation timed out on bank %d\n", i);
}
@@ -266,7 +256,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint16_t acc_clks;
uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
en_lo = CEIL_DIV(Trp[mode], CLK_X);
@@ -303,7 +293,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
acc_clks++;
if ((data_invalid - acc_clks * CLK_X) < 2)
- nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
+ dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n",
__FILE__, __LINE__);
addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
@@ -431,7 +421,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
#endif
break;
default:
- nand_dbg_print(NAND_DBG_WARN,
+ dev_warn(&denali->dev->dev,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n",
device_id);
@@ -453,7 +443,7 @@ static void find_valid_banks(struct denali_nand_info *denali)
index_addr_read_data(denali,
(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
- nand_dbg_print(NAND_DBG_DEBUG,
+ dev_dbg(&denali->dev->dev,
"Return 1st ID for bank[%d]: %x\n", i, id[i]);
if (i == 0) {
@@ -473,12 +463,13 @@ static void find_valid_banks(struct denali_nand_info *denali)
* Multichip support is not enabled.
*/
if (denali->total_used_banks != 1) {
- printk(KERN_ERR "Sorry, Intel CE4100 only supports "
+ dev_err(&denali->dev->dev,
+ "Sorry, Intel CE4100 only supports "
"a single NAND device.\n");
BUG();
}
}
- nand_dbg_print(NAND_DBG_DEBUG,
+ dev_dbg(&denali->dev->dev,
"denali->total_used_banks: %d\n", denali->total_used_banks);
}
@@ -512,8 +503,9 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
+ dev_dbg(&denali->dev->dev,
+ "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
/* Use read id method to get device ID and other
* params. For some NAND chips, controller can't
@@ -540,12 +532,14 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
get_hynix_nand_para(denali, device_id);
}
- nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
- "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
- "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+ dev_info(&denali->dev->dev,
+ "Dump timing register values:"
+ "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
+ "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
ioread32(denali->flash_reg + ACC_CLKS),
ioread32(denali->flash_reg + RE_2_WE),
+ ioread32(denali->flash_reg + RE_2_RE),
ioread32(denali->flash_reg + WE_2_RE),
ioread32(denali->flash_reg + ADDR_2_DATA),
ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
@@ -568,7 +562,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE)
{
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
if (INT_ENABLE)
@@ -645,11 +639,6 @@ static void clear_interrupts(struct denali_nand_info *denali)
status = read_interrupt_status(denali);
clear_interrupt(denali, status);
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
- denali->idx %= 32;
-#endif
-
denali->irq_status = 0x0;
spin_unlock_irq(&denali->irq_lock);
}
@@ -663,17 +652,6 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali)
return ioread32(denali->flash_reg + intr_status_reg);
}
-#if DEBUG_DENALI
-static void print_irq_log(struct denali_nand_info *denali)
-{
- int i = 0;
-
- printk(KERN_INFO "ISR debug log index = %X\n", denali->idx);
- for (i = 0; i < 32; i++)
- printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]);
-}
-#endif
-
/* This is the interrupt service routine. It handles all interrupts
* sent to this device. Note that on CE4100, this is a shared
* interrupt.
@@ -694,13 +672,6 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
* the interrupt, since this is a shared interrupt */
irq_status = denali_irq_detected(denali);
if (irq_status != 0) {
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] =
- 0x10000000 | irq_status;
- denali->idx %= 32;
-
- printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
-#endif
/* handle interrupt */
/* first acknowledge it */
clear_interrupt(denali, irq_status);
@@ -726,41 +697,20 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
unsigned long timeout = msecs_to_jiffies(1000);
do {
-#if DEBUG_DENALI
- printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
-#endif
comp_res =
wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock);
intr_status = denali->irq_status;
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] =
- 0x20000000 | (irq_mask << 16) | intr_status;
- denali->idx %= 32;
-#endif
-
if (intr_status & irq_mask) {
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
- if (retry)
- printk(KERN_INFO "status on retry = 0x%x\n",
- intr_status);
-#endif
/* our interrupt was detected */
break;
} else {
/* these are not the interrupts you are looking for -
* need to wait again */
spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
- print_irq_log(denali);
- printk(KERN_INFO "received irq nobody cared:"
- " irq_status = 0x%x, irq_mask = 0x%x,"
- " timeout = %ld\n", intr_status,
- irq_mask, comp_res);
-#endif
retry = true;
}
} while (comp_res != 0);
@@ -814,16 +764,6 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] =
- 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) |
- (access_type << 4);
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
/* clear interrupts */
clear_interrupts(denali);
@@ -862,9 +802,10 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "cmd, page, addr on timeout "
- "(0x%x, 0x%x, 0x%x)\n", cmd,
- denali->page, addr);
+ dev_err(&denali->dev->dev,
+ "cmd, page, addr on timeout "
+ "(0x%x, 0x%x, 0x%x)\n",
+ cmd, denali->page, addr);
status = FAIL;
} else {
cmd = MODE_01 | addr;
@@ -932,24 +873,15 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
DENALI_WRITE) == PASS) {
write_data_to_flash_mem(denali, buf, mtd->oobsize);
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] =
- 0x80000000 | mtd->oobsize;
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "OOB write failed\n");
+ dev_err(&denali->dev->dev, "OOB write failed\n");
status = -EIO;
}
} else {
- printk(KERN_ERR "unable to send pipeline command\n");
+ dev_err(&denali->dev->dev, "unable to send pipeline command\n");
status = -EIO;
}
return status;
@@ -964,9 +896,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
denali->page = page;
-#if DEBUG_DENALI
- printk(KERN_INFO "read_oob %d\n", page);
-#endif
if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
DENALI_READ) == PASS) {
read_data_from_flash_mem(denali, buf, mtd->oobsize);
@@ -977,7 +906,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
- printk(KERN_ERR "page on OOB timeout %d\n",
+ dev_err(&denali->dev->dev, "page on OOB timeout %d\n",
denali->page);
/* We set the device back to MAIN_ACCESS here as I observed
@@ -989,14 +918,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
addr = BANK(denali->flash_bank) | denali->page;
cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
-
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] =
- 0x60000000 | mtd->oobsize;
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
}
}
@@ -1070,13 +991,6 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
* */
check_erased_page = true;
}
-
-#if DEBUG_DENALI
- printk(KERN_INFO "Detected ECC error in page %d:"
- " err_addr = 0x%08x, info to fix is"
- " 0x%08x\n", denali->page, err_address,
- err_correction_info);
-#endif
} while (!ECC_LAST_ERR(err_correction_info));
/* Once handle all ecc errors, controller will triger
* a ECC_TRANSACTION_DONE interrupt, so here just wait
@@ -1170,8 +1084,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "timeout on write_page"
- " (type = %d)\n", raw_xfer);
+ dev_err(&denali->dev->dev,
+ "timeout on write_page (type = %d)\n",
+ raw_xfer);
denali->status =
(irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
NAND_STATUS_FAIL : PASS;
@@ -1308,18 +1223,13 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
if (denali->buf.head < denali->buf.tail)
result = denali->buf.buf[denali->buf.head++];
-#if DEBUG_DENALI
- printk(KERN_INFO "read byte -> 0x%02x\n", result);
-#endif
return result;
}
static void denali_select_chip(struct mtd_info *mtd, int chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
-#if DEBUG_DENALI
- printk(KERN_INFO "denali select chip %d\n", chip);
-#endif
+
spin_lock_irq(&denali->irq_lock);
denali->flash_bank = chip;
spin_unlock_irq(&denali->irq_lock);
@@ -1331,9 +1241,6 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
int status = denali->status;
denali->status = 0;
-#if DEBUG_DENALI
- printk(KERN_INFO "waitfunc %d\n", status);
-#endif
return status;
}
@@ -1343,9 +1250,6 @@ static void denali_erase(struct mtd_info *mtd, int page)
uint32_t cmd = 0x0, irq_status = 0;
-#if DEBUG_DENALI
- printk(KERN_INFO "erase page: %d\n", page);
-#endif
/* clear interrupts */
clear_interrupts(denali);
@@ -1368,9 +1272,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
uint32_t addr, id;
int i;
-#if DEBUG_DENALI
- printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
-#endif
switch (cmd) {
case NAND_CMD_PAGEPROG:
break;
@@ -1414,7 +1315,9 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code)
{
- printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_calculate called unexpectedly\n");
BUG();
return -EIO;
}
@@ -1422,14 +1325,18 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
- printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_correct called unexpectedly\n");
BUG();
return -EIO;
}
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
{
- printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_hwctl called unexpectedly\n");
BUG();
}
/* end NAND core entry points */
@@ -1525,9 +1432,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
unsigned long csr_len, mem_len;
struct denali_nand_info *denali;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
denali = kzalloc(sizeof(*denali), GFP_KERNEL);
if (!denali)
return -ENOMEM;
@@ -1562,11 +1466,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (!mem_len) {
mem_base = csr_base + csr_len;
mem_len = csr_len;
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: No second"
- " BAR for PCI device;"
- " assuming %08Lx\n",
- (uint64_t)csr_base);
}
}
@@ -1583,7 +1482,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
- printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
+ dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
goto failed_enable_dev;
}
@@ -1602,8 +1501,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = -ENOMEM;
goto failed_req_regions;
}
- nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n",
- (uint64_t)csr_base, denali->flash_reg, csr_len);
denali->flash_mem = ioremap_nocache(mem_base, mem_len);
if (!denali->flash_mem) {
@@ -1612,15 +1509,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto failed_remap_reg;
}
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: Remapped flash base address: "
- "0x%p, len: %ld\n",
- denali->flash_mem, csr_len);
-
denali_hw_init(denali);
denali_drv_init(denali);
- nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) {
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
@@ -1635,18 +1526,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali_nand_timing_set(denali);
- nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
- "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
- "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
- "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
- ioread32(denali->flash_reg + ACC_CLKS),
- ioread32(denali->flash_reg + RE_2_WE),
- ioread32(denali->flash_reg + WE_2_RE),
- ioread32(denali->flash_reg + ADDR_2_DATA),
- ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
- ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
- ioread32(denali->flash_reg + CS_SETUP_CNT));
-
denali->mtd.name = "Denali NAND";
denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand;
@@ -1772,8 +1651,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = add_mtd_device(&denali->mtd);
if (ret) {
- printk(KERN_ERR "Spectra: Failed to register"
- " MTD device: %d\n", ret);
+ dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
+ ret);
goto failed_req_irq;
}
return 0;
@@ -1801,9 +1680,6 @@ static void denali_pci_remove(struct pci_dev *dev)
{
struct denali_nand_info *denali = pci_get_drvdata(dev);
- nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
nand_release(&denali->mtd);
del_mtd_device(&denali->mtd);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index b680474..3918bcb 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -635,24 +635,6 @@
#define CLK_X 5
#define CLK_MULTI 4
-/* ffsport.h */
-#define VERBOSE 1
-
-#define NAND_DBG_WARN 1
-#define NAND_DBG_DEBUG 2
-#define NAND_DBG_TRACE 3
-
-#ifdef VERBOSE
-#define nand_dbg_print(level, args...) \
- do { \
- if (level <= nand_debug_level) \
- printk(KERN_ALERT args); \
- } while (0)
-#else
-#define nand_dbg_print(level, args...)
-#endif
-
-
/* spectraswconfig.h */
#define CMD_DMA 0
More information about the linux-mtd-cvs
mailing list