[MTD] [NAND] cs553x_nand: command line partitioning support

[Linux-MTD Mailing List]

Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=641f43669fa28ca795ac4e9b3ec78643a007ee20
Commit:     641f43669fa28ca795ac4e9b3ec78643a007ee20
Parent:     b1d0e4f535e10775cffde922208b49629169aeaa
Author:     Mart Raudsepp <mart.raudsepp at artecdesign.ee>
AuthorDate: Sat Feb 9 08:16:36 2008 +0000
Committer:  David Woodhouse <dwmw2 at infradead.org>
CommitDate: Sat Feb 9 08:21:31 2008 +0000

    [MTD] [NAND] cs553x_nand: command line partitioning support
    
    Implements kernel command line partitioning support for the CS5535/CS5536 chipsets driver.
    
    For that the following is done:
    
    * cs553x_cleanup(): try the cleanup for all chip selects to not leak memory
    * Assign a unique name for each chip select to be separately addressable in the command line mtd-id portion(s)
    * Use the already defined PIN_OPT_IDE constant where appropriate for readability
    * Include command line partitioning support when CONFIG_MTD_PARTS is set
    
    Signed-off-by: Mart Raudsepp <mart.raudsepp at artecdesign.ee>
    Signed-off-by: David Woodhouse <dwmw2 at infradead.org>
---
 drivers/mtd/nand/cs553x_nand.c |   31 ++++++++++++++++++++++++++++---
 1 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 19e1594..8dab696 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -13,9 +13,12 @@
  *  Overview:
  *   This is a device driver for the NAND flash controller found on
  *   the AMD CS5535/CS5536 companion chipsets for the Geode processor.
+ *   mtd-id for command line partitioning is cs553x_nand_cs[0-3]
+ *   where 0-3 reflects the chip select for NAND.
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -244,6 +247,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 		goto out_ior;
 	}
 
+	new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
+
 	cs553x_mtd[cs] = new_mtd;
 	goto out;
 
@@ -272,12 +277,21 @@ static int is_geode(void)
 	return 0;
 }
 
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+
 static int __init cs553x_init(void)
 {
 	int err = -ENXIO;
 	int i;
 	uint64_t val;
 
+	int mtd_parts_nb = 0;
+	struct mtd_partition *mtd_parts = NULL;
+
 	/* If the CPU isn't a Geode GX or LX, abort */
 	if (!is_geode())
 		return -ENXIO;
@@ -290,7 +304,7 @@ static int __init cs553x_init(void)
 
 	/* If it doesn't have the NAND controller enabled, abort */
 	rdmsrl(MSR_DIVIL_BALL_OPTS, val);
-	if (val & 1) {
+	if (val & PIN_OPT_IDE) {
 		printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
 		return -ENXIO;
 	}
@@ -306,9 +320,19 @@ static int __init cs553x_init(void)
 	   do mtdconcat etc. if we want to. */
 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 		if (cs553x_mtd[i]) {
-			add_mtd_device(cs553x_mtd[i]);
 
 			/* If any devices registered, return success. Else the last error. */
+#ifdef CONFIG_MTD_PARTITIONS
+			mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
+			if (mtd_parts_nb > 0) {
+				printk(KERN_NOTICE "Using command line partition definition\n");
+				add_mtd_partitions(cs553x_mtd[i], mtd_parts, mtd_parts_nb);
+			} else {
+				add_mtd_device(cs553x_mtd[i]);
+			}
+#else
+			add_mtd_device(cs553x_mtd[i]);
+#endif
 			err = 0;
 		}
 	}
@@ -328,13 +352,14 @@ static void __exit cs553x_cleanup(void)
 		void __iomem *mmio_base;
 
 		if (!mtd)
-			break;
+			continue;
 
 		this = cs553x_mtd[i]->priv;
 		mmio_base = this->IO_ADDR_R;
 
 		/* Release resources, unregister device */
 		nand_release(cs553x_mtd[i]);
+		kfree(cs553x_mtd[i]->name);
 		cs553x_mtd[i] = NULL;
 
 		/* unmap physical address */