UBI: add auto-resize feature
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Sun Feb 3 06:59:01 EST 2008
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=4ccf8cffa963c7b5bdc6d455ea9417084ee49aa8
Commit: 4ccf8cffa963c7b5bdc6d455ea9417084ee49aa8
Parent: 896c0c06aa30147630e9a75949b6ae2014c841fc
Author: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
AuthorDate: Wed Jan 16 15:44:24 2008 +0200
Committer: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
CommitDate: Fri Jan 25 16:41:24 2008 +0200
UBI: add auto-resize feature
The problem: NAND flashes have different amount of initial bad physical
eraseblocks (marked as bad by the manufacturer). For example, for 256MiB
Samsung OneNAND flash there might be from 0 to 40 bad initial eraseblocks,
which is about 2%. When UBI is used as the base system, one needs to know
the exact amount of good physical eraseblocks, because this number is
needed to create the UBI image which is put to the devices during
production. But this number is not know, which forces us to use the
minimum number of good physical eraseblocks. And UBI additionally
reserves some percentage of physical eraseblocks for bad block handling
(default is 1%), so we have 1-3% of PEBs reserved at the end, depending
on the amount of initial bad PEBs. But it is desired to always have
1% (or more, depending on the configuration).
Solution: this patch adds an "auto-resize" flag to the volume table.
The volume which has the "auto-resize" flag will automatically be re-sized
(enlarged) on the first UBI initialization. UBI clears the flag when
the volume is re-sized. Only one volume may have the "auto-resize" flag.
So, the production UBI image may have one volume with "auto-resize"
flag set, and its size is automatically adjusted on the first boot
of the device.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
---
drivers/mtd/ubi/build.c | 69 ++++++++++++++++++++++++++++++++++++++++++---
drivers/mtd/ubi/eba.c | 15 ----------
drivers/mtd/ubi/ubi.h | 6 +++-
drivers/mtd/ubi/vmt.c | 2 -
drivers/mtd/ubi/vtbl.c | 11 +++++++
drivers/mtd/ubi/wl.c | 1 -
include/mtd/ubi-header.h | 43 +++++++++++++++++++++++++++-
7 files changed, 121 insertions(+), 26 deletions(-)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 8b45735..4e761e9 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -366,9 +366,6 @@ static int uif_init(struct ubi_device *ubi)
int i, err;
dev_t dev;
- mutex_init(&ubi->volumes_mutex);
- spin_lock_init(&ubi->volumes_lock);
-
sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
/*
@@ -624,6 +621,58 @@ static int io_init(struct ubi_device *ubi)
}
/**
+ * autoresize - re-size the volume which has the "auto-resize" flag set.
+ * @ubi: UBI device description object
+ * @vol_id: ID of the volume to re-size
+ *
+ * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * the volume table to the largest possible size. See comments in ubi-header.h
+ * for more description of the flag. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+static int autoresize(struct ubi_device *ubi, int vol_id)
+{
+ struct ubi_volume_desc desc;
+ struct ubi_volume *vol = ubi->volumes[vol_id];
+ int err, old_reserved_pebs = vol->reserved_pebs;
+
+ /*
+ * Clear the auto-resize flag in the volume in-memory copy of the
+ * volume table, and 'ubi_resize_volume()' will propogate this change
+ * to the flash.
+ */
+ ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
+
+ if (ubi->avail_pebs == 0) {
+ struct ubi_vtbl_record vtbl_rec;
+
+ /*
+ * No avalilable PEBs to re-size the volume, clear the flag on
+ * flash and exit.
+ */
+ memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
+ sizeof(struct ubi_vtbl_record));
+ err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+ if (err)
+ ubi_err("cannot clean auto-resize flag for volume %d",
+ vol_id);
+ } else {
+ desc.vol = vol;
+ err = ubi_resize_volume(&desc,
+ old_reserved_pebs + ubi->avail_pebs);
+ if (err)
+ ubi_err("cannot auto-resize volume %d", vol_id);
+ }
+
+ if (err)
+ return err;
+
+ ubi_msg("volume %d (\"%s\") re-sized from %d to %d LEBs", vol_id,
+ vol->name, old_reserved_pebs, vol->reserved_pebs);
+ return 0;
+}
+
+/**
* ubi_attach_mtd_dev - attach an MTD device.
* @mtd_dev: MTD device description object
* @ubi_num: number to assign to the new UBI device
@@ -699,6 +748,12 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
ubi->mtd = mtd;
ubi->ubi_num = ubi_num;
ubi->vid_hdr_offset = vid_hdr_offset;
+ ubi->autoresize_vol_id = -1;
+
+ mutex_init(&ubi->buf_mutex);
+ mutex_init(&ubi->ckvol_mutex);
+ mutex_init(&ubi->volumes_mutex);
+ spin_lock_init(&ubi->volumes_lock);
dbg_msg("attaching mtd%d to ubi%d: VID header offset %d",
mtd->index, ubi_num, vid_hdr_offset);
@@ -707,8 +762,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
if (err)
goto out_free;
- mutex_init(&ubi->buf_mutex);
- mutex_init(&ubi->ckvol_mutex);
ubi->peb_buf1 = vmalloc(ubi->peb_size);
if (!ubi->peb_buf1)
goto out_free;
@@ -730,6 +783,12 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
goto out_free;
}
+ if (ubi->autoresize_vol_id != -1) {
+ err = autoresize(ubi, ubi->autoresize_vol_id);
+ if (err)
+ goto out_detach;
+ }
+
err = uif_init(ubi);
if (err)
goto out_detach;
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 7c05c6e..1f951e3 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -341,9 +341,6 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
{
int err, pnum, vol_id = vol->vol_id;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
@@ -392,9 +389,6 @@ int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
struct ubi_vid_hdr *vid_hdr;
uint32_t uninitialized_var(crc);
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
err = leb_read_lock(ubi, vol_id, lnum);
if (err)
return err;
@@ -618,9 +612,6 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
int err, pnum, tries = 0, vol_id = vol->vol_id;
struct ubi_vid_hdr *vid_hdr;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
@@ -754,9 +745,6 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
struct ubi_vid_hdr *vid_hdr;
uint32_t crc;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
@@ -871,9 +859,6 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
struct ubi_vid_hdr *vid_hdr;
uint32_t crc;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 90cdcad..a8cdbd0 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -250,9 +250,11 @@ struct ubi_wl_entry;
* @rsvd_pebs: count of reserved physical eraseblocks
* @avail_pebs: count of available physical eraseblocks
* @beb_rsvd_pebs: how many physical eraseblocks are reserved for bad PEB
- * handling
+ * handling
* @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling
*
+ * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end
+ * of UBI ititializetion
* @vtbl_slots: how many slots are available in the volume table
* @vtbl_size: size of the volume table in bytes
* @vtbl: in-RAM volume table copy
@@ -333,12 +335,14 @@ struct ubi_device {
int beb_rsvd_pebs;
int beb_rsvd_level;
+ int autoresize_vol_id;
int vtbl_slots;
int vtbl_size;
struct ubi_vtbl_record *vtbl;
struct mutex volumes_mutex;
int max_ec;
+ /* TODO: mean_ec is not updated run-time, fix */
int mean_ec;
/* EBA unit's stuff */
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 221ce70..a3ca225 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -497,8 +497,6 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
dbg_msg("re-size volume %d to from %d to %d PEBs",
vol_id, vol->reserved_pebs, reserved_pebs);
- ubi_assert(desc->mode == UBI_EXCLUSIVE);
- ubi_assert(vol == ubi->volumes[vol_id]);
if (vol->vol_type == UBI_STATIC_VOLUME &&
reserved_pebs < vol->used_ebs) {
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 7a1a8a1..2fd9cf4 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -514,6 +514,17 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
vol->name[vol->name_len] = '\0';
vol->vol_id = i;
+ if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
+ /* Auto re-size flag may be set only for one volume */
+ if (ubi->autoresize_vol_id != -1) {
+ ubi_err("more then one auto-resize volume (%d "
+ "and %d)", ubi->autoresize_vol_id, i);
+ return -EINVAL;
+ }
+
+ ubi->autoresize_vol_id = i;
+ }
+
ubi_assert(!ubi->volumes[i]);
ubi->volumes[i] = vol;
ubi->vol_count += 1;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 1142aab..8bfb743 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1303,7 +1303,6 @@ int ubi_wl_flush(struct ubi_device *ubi)
* Make sure all the works which have been done in parallel are
* finished.
*/
- ubi_assert(ubi->ref_count > 0);
down_write(&ubi->work_sem);
up_write(&ubi->work_sem);
diff --git a/include/mtd/ubi-header.h b/include/mtd/ubi-header.h
index 74efa77..69d5d7e 100644
--- a/include/mtd/ubi-header.h
+++ b/include/mtd/ubi-header.h
@@ -58,6 +58,43 @@ enum {
};
/*
+ * Volume flags used in the volume table record.
+ *
+ * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume
+ *
+ * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume
+ * table. UBI automatically re-sizes the volume which has this flag and makes
+ * the volume to be of largest possible size. This means that if after the
+ * initialization UBI finds out that there are available physical eraseblocks
+ * present on the device, it automatically appends all of them to the volume
+ * (the physical eraseblocks reserved for bad eraseblocks handling and other
+ * reserved physical eraseblocks are not taken). So, if there is a volume with
+ * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical
+ * eraseblocks will be zero after UBI is loaded, because all of them will be
+ * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared
+ * after the volume had been initialized.
+ *
+ * The auto-resize feature is useful for device production purposes. For
+ * example, different NAND flash chips may have different amount of initial bad
+ * eraseblocks, depending of particular chip instance. Manufacturers of NAND
+ * chips usually guarantee that the amount of initial bad eraseblocks does not
+ * exceed certain percent, e.g. 2%. When one creates an UBI image which will be
+ * flashed to the end devices in production, he does not know the exact amount
+ * of good physical eraseblocks the NAND chip on the device will have, but this
+ * number is required to calculate the volume sized and put them to the volume
+ * table of the UBI image. In this case, one of the volumes (e.g., the one
+ * which will store the root file system) is marked as "auto-resizable", and
+ * UBI will adjust its size on the first boot if needed.
+ *
+ * Note, first UBI reserves some amount of physical eraseblocks for bad
+ * eraseblock handling, and then re-sizes the volume, not vice-versa. This
+ * means that the pool of reserved physical eraseblocks will always be present.
+ */
+enum {
+ UBI_VTBL_AUTORESIZE_FLG = 0x01,
+};
+
+/*
* Compatibility constants used by internal volumes.
*
* @UBI_COMPAT_DELETE: delete this internal volume before anything is written
@@ -289,7 +326,8 @@ struct ubi_vid_hdr {
* @upd_marker: if volume update was started but not finished
* @name_len: volume name length
* @name: the volume name
- * @padding2: reserved, zeroes
+ * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG)
+ * @padding: reserved, zeroes
* @crc: a CRC32 checksum of the record
*
* The volume table records are stored in the volume table, which is stored in
@@ -324,7 +362,8 @@ struct ubi_vtbl_record {
__u8 upd_marker;
__be16 name_len;
__u8 name[UBI_VOL_NAME_MAX+1];
- __u8 padding2[24];
+ __u8 flags;
+ __u8 padding[23];
__be32 crc;
} __attribute__ ((packed));
More information about the linux-mtd-cvs
mailing list