[MTD] sharpsl_nand: move io addr to struct sharpsl_nand
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Wed Dec 10 12:59:02 EST 2008
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=a4e4f29cbeec200c12c6f3ebedc053a581f90b48
Commit: a4e4f29cbeec200c12c6f3ebedc053a581f90b48
Parent: 2206ef1c5f6002e474b8eff8a56b6b7fd2efbe8f
Author: Dmitry Baryshkov <dbaryshkov at gmail.com>
AuthorDate: Thu Oct 16 17:58:18 2008 +0400
Committer: Dmitry Baryshkov <dbaryshkov at gmail.com>
CommitDate: Wed Oct 29 21:06:37 2008 +0300
[MTD] sharpsl_nand: move io addr to struct sharpsl_nand
Signed-off-by: Dmitry Baryshkov <dbaryshkov at gmail.com>
---
drivers/mtd/nand/sharpsl.c | 59 +++++++++++++++++++++++--------------------
1 files changed, 32 insertions(+), 27 deletions(-)
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 6851806..328e02e 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -29,18 +29,20 @@
struct sharpsl_nand {
struct mtd_info mtd;
struct nand_chip chip;
+
+ void __iomem *io;
};
-static void __iomem *sharpsl_io_base;
+#define mtd_to_sharpsl(_mtd) container_of(_mtd, struct sharpsl_nand, mtd)
/* register offset */
-#define ECCLPLB sharpsl_io_base+0x00 /* line parity 7 - 0 bit */
-#define ECCLPUB sharpsl_io_base+0x04 /* line parity 15 - 8 bit */
-#define ECCCP sharpsl_io_base+0x08 /* column parity 5 - 0 bit */
-#define ECCCNTR sharpsl_io_base+0x0C /* ECC byte counter */
-#define ECCCLRR sharpsl_io_base+0x10 /* cleare ECC */
-#define FLASHIO sharpsl_io_base+0x14 /* Flash I/O */
-#define FLASHCTL sharpsl_io_base+0x18 /* Flash Control */
+#define ECCLPLB 0x00 /* line parity 7 - 0 bit */
+#define ECCLPUB 0x04 /* line parity 15 - 8 bit */
+#define ECCCP 0x08 /* column parity 5 - 0 bit */
+#define ECCCNTR 0x0C /* ECC byte counter */
+#define ECCCLRR 0x10 /* cleare ECC */
+#define FLASHIO 0x14 /* Flash I/O */
+#define FLASHCTL 0x18 /* Flash Control */
/* Flash control bit */
#define FLRYBY (1 << 5)
@@ -85,6 +87,7 @@ static struct mtd_partition sharpsl_nand_default_partition_info[] = {
static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
struct nand_chip *chip = mtd->priv;
if (ctrl & NAND_CTRL_CHANGE) {
@@ -94,7 +97,7 @@ static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
bits ^= 0x11;
- writeb((readb(FLASHCTL) & ~0x17) | bits, FLASHCTL);
+ writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
}
if (cmd != NAND_CMD_NONE)
@@ -128,20 +131,23 @@ static struct nand_ecclayout akita_oobinfo = {
static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
{
- return !((readb(FLASHCTL) & FLRYBY) == 0);
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
}
static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
- writeb(0, ECCCLRR);
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ writeb(0, sharpsl->io + ECCCLRR);
}
static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
{
- ecc_code[0] = ~readb(ECCLPUB);
- ecc_code[1] = ~readb(ECCLPLB);
- ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
- return readb(ECCCNTR) != 0;
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
+ ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
+ ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
+ return readb(sharpsl->io + ECCCNTR) != 0;
}
#ifdef CONFIG_MTD_PARTITIONS
@@ -174,8 +180,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
}
/* map physical address */
- sharpsl_io_base = ioremap(r->start, resource_size(r));
- if (!sharpsl_io_base) {
+ sharpsl->io = ioremap(r->start, resource_size(r));
+ if (!sharpsl->io) {
printk("ioremap to access Sharp SL NAND chip failed\n");
err = -EIO;
goto err_ioremap;
@@ -193,11 +199,11 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
/*
* PXA initialize
*/
- writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
+ writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
/* Set address of NAND IO lines */
- this->IO_ADDR_R = FLASHIO;
- this->IO_ADDR_W = FLASHIO;
+ this->IO_ADDR_R = sharpsl->io + FLASHIO;
+ this->IO_ADDR_W = sharpsl->io + FLASHIO;
/* Set address of hardware control function */
this->cmd_ctrl = sharpsl_nand_hwcontrol;
this->dev_ready = sharpsl_nand_dev_ready;
@@ -218,12 +224,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
/* Scan to find existence of the device */
err = nand_scan(&sharpsl->mtd, 1);
- if (err) {
- platform_set_drvdata(pdev, NULL);
- iounmap(sharpsl_io_base);
- kfree(sharpsl);
- return err;
- }
+ if (err)
+ goto err_scan;
/* Register the partitions */
sharpsl->mtd.name = "sharpsl-nand";
@@ -252,6 +254,9 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
/* Return happy */
return 0;
+err_scan:
+ platform_set_drvdata(pdev, NULL);
+ iounmap(sharpsl->io);
err_ioremap:
err_get_res:
kfree(sharpsl);
@@ -270,7 +275,7 @@ static int __devexit sharpsl_nand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
- iounmap(sharpsl_io_base);
+ iounmap(sharpsl->io);
/* Free the MTD device structure */
kfree(sharpsl);
More information about the linux-mtd-cvs
mailing list