[MTD] [OneNAND] Add OMAP2 / OMAP3 OneNAND driver
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Tue Aug 12 06:59:12 EDT 2008
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=36cd4fb5d277f34fe9e4db0deac2d4efd7dff735
Commit: 36cd4fb5d277f34fe9e4db0deac2d4efd7dff735
Parent: bb0eb217c980d50c45f3e793b4dcc70ab9ee820d
Author: Adrian Hunter <ext-adrian.hunter at nokia.com>
AuthorDate: Wed Aug 6 10:08:46 2008 +0300
Committer: David Woodhouse <David.Woodhouse at intel.com>
CommitDate: Tue Aug 12 11:07:37 2008 +0100
[MTD] [OneNAND] Add OMAP2 / OMAP3 OneNAND driver
This driver had resided in the OMAP tree but is now to be in MTD.
Original authors were:
Jarkko Lavinen <jarkko.lavinen at nokia.com> and Juha Yrjölä
IRQ and DMA support written by Timo Teras
Signed-off-by: Adrian Hunter <ext-adrian.hunter at nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
---
drivers/mtd/onenand/Kconfig | 7 +
drivers/mtd/onenand/Makefile | 1 +
drivers/mtd/onenand/omap2.c | 777 +++++++++++++++++++++++++++++++++++
include/asm-arm/arch-omap/onenand.h | 7 +-
4 files changed, 791 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index b94a61b..79fa79e 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -27,6 +27,13 @@ config MTD_ONENAND_GENERIC
help
Support for OneNAND flash via platform device driver.
+config MTD_ONENAND_OMAP2
+ tristate "OneNAND on OMAP2/OMAP3 support"
+ depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ help
+ Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
+ via the GPMC memory controller.
+
config MTD_ONENAND_OTP
bool "OneNAND OTP Support"
select HAVE_MTD_OTP
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 4d2eacf..64b6cc6 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
# Board specific.
obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
+obj-$(CONFIG_MTD_ONENAND_OMAP2) += omap2.o
# Simulator
obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
new file mode 100644
index 0000000..40153ac
--- /dev/null
+++ b/drivers/mtd/onenand/omap2.c
@@ -0,0 +1,777 @@
+/*
+ * linux/drivers/mtd/onenand/omap2.c
+ *
+ * OneNAND driver for OMAP2 / OMAP3
+ *
+ * Copyright © 2005-2006 Nokia Corporation
+ *
+ * Author: Jarkko Lavinen <jarkko.lavinen at nokia.com> and Juha Yrjölä
+ * IRQ and DMA support written by Timo Teras
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; see the file COPYING. If not, write to the Free Software
+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/onenand.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/pm.h>
+
+#include <linux/dma-mapping.h>
+#include <asm/dma-mapping.h>
+#include <asm/arch/dma.h>
+
+#include <asm/arch/board.h>
+
+#define DRIVER_NAME "omap2-onenand"
+
+#define ONENAND_IO_SIZE SZ_128K
+#define ONENAND_BUFRAM_SIZE (1024 * 5)
+
+struct omap2_onenand {
+ struct platform_device *pdev;
+ int gpmc_cs;
+ unsigned long phys_base;
+ int gpio_irq;
+ struct mtd_info mtd;
+ struct mtd_partition *parts;
+ struct onenand_chip onenand;
+ struct completion irq_done;
+ struct completion dma_done;
+ int dma_channel;
+ int freq;
+ int (*setup)(void __iomem *base, int freq);
+};
+
+static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
+{
+ struct omap2_onenand *c = data;
+
+ complete(&c->dma_done);
+}
+
+static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
+{
+ struct omap2_onenand *c = dev_id;
+
+ complete(&c->irq_done);
+
+ return IRQ_HANDLED;
+}
+
+static inline unsigned short read_reg(struct omap2_onenand *c, int reg)
+{
+ return readw(c->onenand.base + reg);
+}
+
+static inline void write_reg(struct omap2_onenand *c, unsigned short value,
+ int reg)
+{
+ writew(value, c->onenand.base + reg);
+}
+
+static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr)
+{
+ printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
+ msg, state, ctrl, intr);
+}
+
+static void wait_warn(char *msg, int state, unsigned int ctrl,
+ unsigned int intr)
+{
+ printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
+ "intr 0x%04x\n", msg, state, ctrl, intr);
+}
+
+static int omap2_onenand_wait(struct mtd_info *mtd, int state)
+{
+ struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+ unsigned int intr = 0;
+ unsigned int ctrl;
+ unsigned long timeout;
+ u32 syscfg;
+
+ if (state == FL_RESETING) {
+ int i;
+
+ for (i = 0; i < 20; i++) {
+ udelay(1);
+ intr = read_reg(c, ONENAND_REG_INTERRUPT);
+ if (intr & ONENAND_INT_MASTER)
+ break;
+ }
+ ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ wait_err("controller error", state, ctrl, intr);
+ return -EIO;
+ }
+ if (!(intr & ONENAND_INT_RESET)) {
+ wait_err("timeout", state, ctrl, intr);
+ return -EIO;
+ }
+ return 0;
+ }
+
+ if (state != FL_READING) {
+ int result;
+
+ /* Turn interrupts on */
+ syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+ syscfg |= ONENAND_SYS_CFG1_IOBE;
+ write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
+
+ INIT_COMPLETION(c->irq_done);
+ if (c->gpio_irq) {
+ result = omap_get_gpio_datain(c->gpio_irq);
+ if (result == -1) {
+ ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+ intr = read_reg(c, ONENAND_REG_INTERRUPT);
+ wait_err("gpio error", state, ctrl, intr);
+ return -EIO;
+ }
+ } else
+ result = 0;
+ if (result == 0) {
+ int retry_cnt = 0;
+retry:
+ result = wait_for_completion_timeout(&c->irq_done,
+ msecs_to_jiffies(20));
+ if (result == 0) {
+ /* Timeout after 20ms */
+ ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+ if (ctrl & ONENAND_CTRL_ONGO) {
+ /*
+ * The operation seems to be still going
+ * so give it some more time.
+ */
+ retry_cnt += 1;
+ if (retry_cnt < 3)
+ goto retry;
+ intr = read_reg(c,
+ ONENAND_REG_INTERRUPT);
+ wait_err("timeout", state, ctrl, intr);
+ return -EIO;
+ }
+ intr = read_reg(c, ONENAND_REG_INTERRUPT);
+ if ((intr & ONENAND_INT_MASTER) == 0)
+ wait_warn("timeout", state, ctrl, intr);
+ }
+ }
+ } else {
+ /* Turn interrupts off */
+ syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+ syscfg &= ~ONENAND_SYS_CFG1_IOBE;
+ write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
+
+ timeout = jiffies + msecs_to_jiffies(20);
+ while (time_before(jiffies, timeout)) {
+ intr = read_reg(c, ONENAND_REG_INTERRUPT);
+ if (intr & ONENAND_INT_MASTER)
+ break;
+ }
+ }
+
+ intr = read_reg(c, ONENAND_REG_INTERRUPT);
+ ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+
+ if (intr & ONENAND_INT_READ) {
+ int ecc = read_reg(c, ONENAND_REG_ECC_STATUS);
+
+ if (ecc) {
+ unsigned int addr1, addr8;
+
+ addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1);
+ addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8);
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ printk(KERN_ERR "onenand_wait: ECC error = "
+ "0x%04x, addr1 %#x, addr8 %#x\n",
+ ecc, addr1, addr8);
+ mtd->ecc_stats.failed++;
+ return -EBADMSG;
+ } else if (ecc & ONENAND_ECC_1BIT_ALL) {
+ printk(KERN_NOTICE "onenand_wait: correctable "
+ "ECC error = 0x%04x, addr1 %#x, "
+ "addr8 %#x\n", ecc, addr1, addr8);
+ mtd->ecc_stats.corrected++;
+ }
+ }
+ } else if (state == FL_READING) {
+ wait_err("timeout", state, ctrl, intr);
+ return -EIO;
+ }
+
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ wait_err("controller error", state, ctrl, intr);
+ if (ctrl & ONENAND_CTRL_LOCK)
+ printk(KERN_ERR "onenand_wait: "
+ "Device is write protected!!!\n");
+ return -EIO;
+ }
+
+ if (ctrl & 0xFE9F)
+ wait_warn("unexpected controller status", state, ctrl, intr);
+
+ return 0;
+}
+
+static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
+{
+ struct onenand_chip *this = mtd->priv;
+
+ if (ONENAND_CURRENT_BUFFERRAM(this)) {
+ if (area == ONENAND_DATARAM)
+ return mtd->writesize;
+ if (area == ONENAND_SPARERAM)
+ return mtd->oobsize;
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
+
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+ struct onenand_chip *this = mtd->priv;
+ dma_addr_t dma_src, dma_dst;
+ int bram_offset;
+ unsigned long timeout;
+ void *buf = (void *)buffer;
+ size_t xtra;
+ volatile unsigned *done;
+
+ bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+ if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
+ goto out_copy;
+
+ if (buf >= high_memory) {
+ struct page *p1;
+
+ if (((size_t)buf & PAGE_MASK) !=
+ ((size_t)(buf + count - 1) & PAGE_MASK))
+ goto out_copy;
+ p1 = vmalloc_to_page(buf);
+ if (!p1)
+ goto out_copy;
+ buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
+ }
+
+ xtra = count & 3;
+ if (xtra) {
+ count -= xtra;
+ memcpy(buf + count, this->base + bram_offset + count, xtra);
+ }
+
+ dma_src = c->phys_base + bram_offset;
+ dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+ dev_err(&c->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n",
+ count);
+ goto out_copy;
+ }
+
+ omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+ count >> 2, 1, 0, 0, 0);
+ omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_src, 0, 0);
+ omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_dst, 0, 0);
+
+ INIT_COMPLETION(c->dma_done);
+ omap_start_dma(c->dma_channel);
+
+ timeout = jiffies + msecs_to_jiffies(20);
+ done = &c->dma_done.done;
+ while (time_before(jiffies, timeout))
+ if (*done)
+ break;
+
+ dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+ if (!*done) {
+ dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
+ goto out_copy;
+ }
+
+ return 0;
+
+out_copy:
+ memcpy(buf, this->base + bram_offset, count);
+ return 0;
+}
+
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+ struct onenand_chip *this = mtd->priv;
+ dma_addr_t dma_src, dma_dst;
+ int bram_offset;
+ unsigned long timeout;
+ void *buf = (void *)buffer;
+ volatile unsigned *done;
+
+ bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+ if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
+ goto out_copy;
+
+ /* panic_write() may be in an interrupt context */
+ if (in_interrupt())
+ goto out_copy;
+
+ if (buf >= high_memory) {
+ struct page *p1;
+
+ if (((size_t)buf & PAGE_MASK) !=
+ ((size_t)(buf + count - 1) & PAGE_MASK))
+ goto out_copy;
+ p1 = vmalloc_to_page(buf);
+ if (!p1)
+ goto out_copy;
+ buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
+ }
+
+ dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
+ dma_dst = c->phys_base + bram_offset;
+ if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+ dev_err(&c->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n",
+ count);
+ return -1;
+ }
+
+ omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+ count >> 2, 1, 0, 0, 0);
+ omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_src, 0, 0);
+ omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_dst, 0, 0);
+
+ INIT_COMPLETION(c->dma_done);
+ omap_start_dma(c->dma_channel);
+
+ timeout = jiffies + msecs_to_jiffies(20);
+ done = &c->dma_done.done;
+ while (time_before(jiffies, timeout))
+ if (*done)
+ break;
+
+ dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+
+ if (!*done) {
+ dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
+ goto out_copy;
+ }
+
+ return 0;
+
+out_copy:
+ memcpy(this->base + bram_offset, buf, count);
+ return 0;
+}
+
+#else
+
+int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count);
+
+int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count);
+
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
+
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+ struct onenand_chip *this = mtd->priv;
+ dma_addr_t dma_src, dma_dst;
+ int bram_offset;
+
+ bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+ /* DMA is not used. Revisit PM requirements before enabling it. */
+ if (1 || (c->dma_channel < 0) ||
+ ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
+ (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
+ memcpy(buffer, (__force void *)(this->base + bram_offset),
+ count);
+ return 0;
+ }
+
+ dma_src = c->phys_base + bram_offset;
+ dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+ dev_err(&c->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n",
+ count);
+ return -1;
+ }
+
+ omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+ count / 4, 1, 0, 0, 0);
+ omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_src, 0, 0);
+ omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_dst, 0, 0);
+
+ INIT_COMPLETION(c->dma_done);
+ omap_start_dma(c->dma_channel);
+ wait_for_completion(&c->dma_done);
+
+ dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+ return 0;
+}
+
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+ struct onenand_chip *this = mtd->priv;
+ dma_addr_t dma_src, dma_dst;
+ int bram_offset;
+
+ bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+ /* DMA is not used. Revisit PM requirements before enabling it. */
+ if (1 || (c->dma_channel < 0) ||
+ ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
+ (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
+ memcpy((__force void *)(this->base + bram_offset), buffer,
+ count);
+ return 0;
+ }
+
+ dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
+ DMA_TO_DEVICE);
+ dma_dst = c->phys_base + bram_offset;
+ if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+ dev_err(&c->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n",
+ count);
+ return -1;
+ }
+
+ omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
+ count / 2, 1, 0, 0, 0);
+ omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_src, 0, 0);
+ omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_dst, 0, 0);
+
+ INIT_COMPLETION(c->dma_done);
+ omap_start_dma(c->dma_channel);
+ wait_for_completion(&c->dma_done);
+
+ dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+
+ return 0;
+}
+
+#else
+
+int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count);
+
+int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count);
+
+#endif
+
+static struct platform_driver omap2_onenand_driver;
+
+static int __adjust_timing(struct device *dev, void *data)
+{
+ int ret = 0;
+ struct omap2_onenand *c;
+
+ c = dev_get_drvdata(dev);
+
+ BUG_ON(c->setup == NULL);
+
+ /* DMA is not in use so this is all that is needed */
+ /* Revisit for OMAP3! */
+ ret = c->setup(c->onenand.base, c->freq);
+
+ return ret;
+}
+
+int omap2_onenand_rephase(void)
+{
+ return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
+ NULL, __adjust_timing);
+}
+
+static void __devexit omap2_onenand_shutdown(struct platform_device *pdev)
+{
+ struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+
+ /* With certain content in the buffer RAM, the OMAP boot ROM code
+ * can recognize the flash chip incorrectly. Zero it out before
+ * soft reset.
+ */
+ memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
+}
+
+static int __devinit omap2_onenand_probe(struct platform_device *pdev)
+{
+ struct omap_onenand_platform_data *pdata;
+ struct omap2_onenand *c;
+ int r;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "platform data missing\n");
+ return -ENODEV;
+ }
+
+ c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
+ if (!c)
+ return -ENOMEM;
+
+ init_completion(&c->irq_done);
+ init_completion(&c->dma_done);
+ c->gpmc_cs = pdata->cs;
+ c->gpio_irq = pdata->gpio_irq;
+ c->dma_channel = pdata->dma_channel;
+ if (c->dma_channel < 0) {
+ /* if -1, don't use DMA */
+ c->gpio_irq = 0;
+ }
+
+ r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
+ if (r < 0) {
+ dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+ goto err_kfree;
+ }
+
+ if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+ pdev->dev.driver->name) == NULL) {
+ dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
+ "size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE);
+ r = -EBUSY;
+ goto err_free_cs;
+ }
+ c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+ if (c->onenand.base == NULL) {
+ r = -ENOMEM;
+ goto err_release_mem_region;
+ }
+
+ if (pdata->onenand_setup != NULL) {
+ r = pdata->onenand_setup(c->onenand.base, c->freq);
+ if (r < 0) {
+ dev_err(&pdev->dev, "Onenand platform setup failed: "
+ "%d\n", r);
+ goto err_iounmap;
+ }
+ c->setup = pdata->onenand_setup;
+ }
+
+ if (c->gpio_irq) {
+ if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+ dev_err(&pdev->dev, "Failed to request GPIO%d for "
+ "OneNAND\n", c->gpio_irq);
+ goto err_iounmap;
+ }
+ omap_set_gpio_direction(c->gpio_irq, 1);
+
+ if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
+ omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
+ pdev->dev.driver->name, c)) < 0)
+ goto err_release_gpio;
+ }
+
+ if (c->dma_channel >= 0) {
+ r = omap_request_dma(0, pdev->dev.driver->name,
+ omap2_onenand_dma_cb, (void *) c,
+ &c->dma_channel);
+ if (r == 0) {
+ omap_set_dma_write_mode(c->dma_channel,
+ OMAP_DMA_WRITE_NON_POSTED);
+ omap_set_dma_src_data_pack(c->dma_channel, 1);
+ omap_set_dma_src_burst_mode(c->dma_channel,
+ OMAP_DMA_DATA_BURST_8);
+ omap_set_dma_dest_data_pack(c->dma_channel, 1);
+ omap_set_dma_dest_burst_mode(c->dma_channel,
+ OMAP_DMA_DATA_BURST_8);
+ } else {
+ dev_info(&pdev->dev,
+ "failed to allocate DMA for OneNAND, "
+ "using PIO instead\n");
+ c->dma_channel = -1;
+ }
+ }
+
+ dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
+ "base %p\n", c->gpmc_cs, c->phys_base,
+ c->onenand.base);
+
+ c->pdev = pdev;
+ c->mtd.name = pdev->dev.bus_id;
+ c->mtd.priv = &c->onenand;
+ c->mtd.owner = THIS_MODULE;
+
+ if (c->dma_channel >= 0) {
+ struct onenand_chip *this = &c->onenand;
+
+ this->wait = omap2_onenand_wait;
+ if (cpu_is_omap34xx()) {
+ this->read_bufferram = omap3_onenand_read_bufferram;
+ this->write_bufferram = omap3_onenand_write_bufferram;
+ } else {
+ this->read_bufferram = omap2_onenand_read_bufferram;
+ this->write_bufferram = omap2_onenand_write_bufferram;
+ }
+ }
+
+ if ((r = onenand_scan(&c->mtd, 1)) < 0)
+ goto err_release_dma;
+
+ switch ((c->onenand.version_id >> 4) & 0xf) {
+ case 0:
+ c->freq = 40;
+ break;
+ case 1:
+ c->freq = 54;
+ break;
+ case 2:
+ c->freq = 66;
+ break;
+ case 3:
+ c->freq = 83;
+ break;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ if (pdata->parts != NULL)
+ r = add_mtd_partitions(&c->mtd, pdata->parts,
+ pdata->nr_parts);
+ else
+#endif
+ r = add_mtd_device(&c->mtd);
+ if (r < 0)
+ goto err_release_onenand;
+
+ platform_set_drvdata(pdev, c);
+
+ return 0;
+
+err_release_onenand:
+ onenand_release(&c->mtd);
+err_release_dma:
+ if (c->dma_channel != -1)
+ omap_free_dma(c->dma_channel);
+ if (c->gpio_irq)
+ free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+err_release_gpio:
+ if (c->gpio_irq)
+ omap_free_gpio(c->gpio_irq);
+err_iounmap:
+ iounmap(c->onenand.base);
+err_release_mem_region:
+ release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+err_free_cs:
+ gpmc_cs_free(c->gpmc_cs);
+err_kfree:
+ kfree(c);
+
+ return r;
+}
+
+static int __devexit omap2_onenand_remove(struct platform_device *pdev)
+{
+ struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+
+ BUG_ON(c == NULL);
+
+#ifdef CONFIG_MTD_PARTITIONS
+ if (c->parts)
+ del_mtd_partitions(&c->mtd);
+ else
+ del_mtd_device(&c->mtd);
+#else
+ del_mtd_device(&c->mtd);
+#endif
+
+ onenand_release(&c->mtd);
+ if (c->dma_channel != -1)
+ omap_free_dma(c->dma_channel);
+ omap2_onenand_shutdown(pdev);
+ platform_set_drvdata(pdev, NULL);
+ if (c->gpio_irq) {
+ free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+ omap_free_gpio(c->gpio_irq);
+ }
+ iounmap(c->onenand.base);
+ release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ kfree(c);
+
+ return 0;
+}
+
+static struct platform_driver omap2_onenand_driver = {
+ .probe = omap2_onenand_probe,
+ .remove = omap2_onenand_remove,
+ .shutdown = omap2_onenand_shutdown,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init omap2_onenand_init(void)
+{
+ printk(KERN_INFO "OneNAND driver initializing\n");
+ return platform_driver_register(&omap2_onenand_driver);
+}
+
+static void __exit omap2_onenand_exit(void)
+{
+ platform_driver_unregister(&omap2_onenand_driver);
+}
+
+module_init(omap2_onenand_init);
+module_exit(omap2_onenand_exit);
+
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen at nokia.com>");
+MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h
index 6c959d0..e302371 100644
--- a/include/asm-arm/arch-omap/onenand.h
+++ b/include/asm-arm/arch-omap/onenand.h
@@ -16,6 +16,11 @@ struct omap_onenand_platform_data {
int gpio_irq;
struct mtd_partition *parts;
int nr_parts;
- int (*onenand_setup)(void __iomem *);
+ int (*onenand_setup)(void __iomem *, int freq);
int dma_channel;
};
+
+int omap2_onenand_rephase(void);
+
+#define ONENAND_MAX_PARTITIONS 8
+
More information about the linux-mtd-cvs
mailing list