[MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Wed May 2 07:59:02 EDT 2007
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=14448005abd10887a2d361e20e04760dc3d8482f
Commit: 14448005abd10887a2d361e20e04760dc3d8482f
Parent: 8c61b7a7f4d4e46be61cf1777361749b2d300c14
Author: David Woodhouse <dwmw2 at infradead.org>
AuthorDate: Wed May 2 12:04:57 2007 +0100
Committer: David Woodhouse <dwmw2 at infradead.org>
CommitDate: Wed May 2 12:04:57 2007 +0100
[MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic
Signed-off-by: David Woodhouse <dwmw2 at infradead.org>
---
drivers/mtd/nand/Makefile | 1 -
drivers/mtd/nand/cafe.c | 838 ------------------------------------------
drivers/mtd/nand/cafe_nand.c | 838 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 838 insertions(+), 839 deletions(-)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 79e9e5d..de1424b 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -28,4 +28,3 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
nand-objs := nand_base.o nand_bbt.o
-cafe_nand-objs := cafe.o
diff --git a/drivers/mtd/nand/cafe.c b/drivers/mtd/nand/cafe.c
deleted file mode 100644
index 05f6ec9..0000000
--- a/drivers/mtd/nand/cafe.c
+++ /dev/null
@@ -1,838 +0,0 @@
-/*
- * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
- *
- * Copyright © 2006 Red Hat, Inc.
- * Copyright © 2006 David Woodhouse <dwmw2 at infradead.org>
- */
-
-#define DEBUG
-
-#include <linux/device.h>
-#undef DEBUG
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/rslib.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <asm/io.h>
-
-#define CAFE_NAND_CTRL1 0x00
-#define CAFE_NAND_CTRL2 0x04
-#define CAFE_NAND_CTRL3 0x08
-#define CAFE_NAND_STATUS 0x0c
-#define CAFE_NAND_IRQ 0x10
-#define CAFE_NAND_IRQ_MASK 0x14
-#define CAFE_NAND_DATA_LEN 0x18
-#define CAFE_NAND_ADDR1 0x1c
-#define CAFE_NAND_ADDR2 0x20
-#define CAFE_NAND_TIMING1 0x24
-#define CAFE_NAND_TIMING2 0x28
-#define CAFE_NAND_TIMING3 0x2c
-#define CAFE_NAND_NONMEM 0x30
-#define CAFE_NAND_ECC_RESULT 0x3C
-#define CAFE_NAND_DMA_CTRL 0x40
-#define CAFE_NAND_DMA_ADDR0 0x44
-#define CAFE_NAND_DMA_ADDR1 0x48
-#define CAFE_NAND_ECC_SYN01 0x50
-#define CAFE_NAND_ECC_SYN23 0x54
-#define CAFE_NAND_ECC_SYN45 0x58
-#define CAFE_NAND_ECC_SYN67 0x5c
-#define CAFE_NAND_READ_DATA 0x1000
-#define CAFE_NAND_WRITE_DATA 0x2000
-
-#define CAFE_GLOBAL_CTRL 0x3004
-#define CAFE_GLOBAL_IRQ 0x3008
-#define CAFE_GLOBAL_IRQ_MASK 0x300c
-#define CAFE_NAND_RESET 0x3034
-
-struct cafe_priv {
- struct nand_chip nand;
- struct pci_dev *pdev;
- void __iomem *mmio;
- struct rs_control *rs;
- uint32_t ctl1;
- uint32_t ctl2;
- int datalen;
- int nr_data;
- int data_pos;
- int page_addr;
- dma_addr_t dmaaddr;
- unsigned char *dmabuf;
-};
-
-static int usedma = 1;
-module_param(usedma, int, 0644);
-
-static int skipbbt = 0;
-module_param(skipbbt, int, 0644);
-
-static int debug = 0;
-module_param(debug, int, 0644);
-
-static int regdebug = 0;
-module_param(regdebug, int, 0644);
-
-static int checkecc = 1;
-module_param(checkecc, int, 0644);
-
-static int numtimings;
-static int timing[3];
-module_param_array(timing, int, &numtimings, 0644);
-
-/* Hrm. Why isn't this already conditional on something in the struct device? */
-#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
-
-/* Make it easier to switch to PIO if we need to */
-#define cafe_readl(cafe, addr) readl((cafe)->mmio + CAFE_##addr)
-#define cafe_writel(cafe, datum, addr) writel(datum, (cafe)->mmio + CAFE_##addr)
-
-static int cafe_device_ready(struct mtd_info *mtd)
-{
- struct cafe_priv *cafe = mtd->priv;
- int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
- uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
-
- cafe_writel(cafe, irqs, NAND_IRQ);
-
- cafe_dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n",
- result?"":" not", irqs, cafe_readl(cafe, NAND_IRQ),
- cafe_readl(cafe, GLOBAL_IRQ), cafe_readl(cafe, GLOBAL_IRQ_MASK));
-
- return result;
-}
-
-
-static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
- struct cafe_priv *cafe = mtd->priv;
-
- if (usedma)
- memcpy(cafe->dmabuf + cafe->datalen, buf, len);
- else
- memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len);
-
- cafe->datalen += len;
-
- cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n",
- len, cafe->datalen);
-}
-
-static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-{
- struct cafe_priv *cafe = mtd->priv;
-
- if (usedma)
- memcpy(buf, cafe->dmabuf + cafe->datalen, len);
- else
- memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len);
-
- cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n",
- len, cafe->datalen);
- cafe->datalen += len;
-}
-
-static uint8_t cafe_read_byte(struct mtd_info *mtd)
-{
- struct cafe_priv *cafe = mtd->priv;
- uint8_t d;
-
- cafe_read_buf(mtd, &d, 1);
- cafe_dev_dbg(&cafe->pdev->dev, "Read %02x\n", d);
-
- return d;
-}
-
-static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
- int column, int page_addr)
-{
- struct cafe_priv *cafe = mtd->priv;
- int adrbytes = 0;
- uint32_t ctl1;
- uint32_t doneint = 0x80000000;
-
- cafe_dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n",
- command, column, page_addr);
-
- if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) {
- /* Second half of a command we already calculated */
- cafe_writel(cafe, cafe->ctl2 | 0x100 | command, NAND_CTRL2);
- ctl1 = cafe->ctl1;
- cafe->ctl2 &= ~(1<<30);
- cafe_dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n",
- cafe->ctl1, cafe->nr_data);
- goto do_command;
- }
- /* Reset ECC engine */
- cafe_writel(cafe, 0, NAND_CTRL2);
-
- /* Emulate NAND_CMD_READOOB on large-page chips */
- if (mtd->writesize > 512 &&
- command == NAND_CMD_READOOB) {
- column += mtd->writesize;
- command = NAND_CMD_READ0;
- }
-
- /* FIXME: Do we need to send read command before sending data
- for small-page chips, to position the buffer correctly? */
-
- if (column != -1) {
- cafe_writel(cafe, column, NAND_ADDR1);
- adrbytes = 2;
- if (page_addr != -1)
- goto write_adr2;
- } else if (page_addr != -1) {
- cafe_writel(cafe, page_addr & 0xffff, NAND_ADDR1);
- page_addr >>= 16;
- write_adr2:
- cafe_writel(cafe, page_addr, NAND_ADDR2);
- adrbytes += 2;
- if (mtd->size > mtd->writesize << 16)
- adrbytes++;
- }
-
- cafe->data_pos = cafe->datalen = 0;
-
- /* Set command valid bit */
- ctl1 = 0x80000000 | command;
-
- /* Set RD or WR bits as appropriate */
- if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) {
- ctl1 |= (1<<26); /* rd */
- /* Always 5 bytes, for now */
- cafe->datalen = 4;
- /* And one address cycle -- even for STATUS, since the controller doesn't work without */
- adrbytes = 1;
- } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
- command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) {
- ctl1 |= 1<<26; /* rd */
- /* For now, assume just read to end of page */
- cafe->datalen = mtd->writesize + mtd->oobsize - column;
- } else if (command == NAND_CMD_SEQIN)
- ctl1 |= 1<<25; /* wr */
-
- /* Set number of address bytes */
- if (adrbytes)
- ctl1 |= ((adrbytes-1)|8) << 27;
-
- if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
- /* Ignore the first command of a pair; the hardware
- deals with them both at once, later */
- cafe->ctl1 = ctl1;
- cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
- cafe->ctl1, cafe->datalen);
- return;
- }
- /* RNDOUT and READ0 commands need a following byte */
- if (command == NAND_CMD_RNDOUT)
- cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, NAND_CTRL2);
- else if (command == NAND_CMD_READ0 && mtd->writesize > 512)
- cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2);
-
- do_command:
- cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
- cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2));
-
- /* NB: The datasheet lies -- we really should be subtracting 1 here */
- cafe_writel(cafe, cafe->datalen, NAND_DATA_LEN);
- cafe_writel(cafe, 0x90000000, NAND_IRQ);
- if (usedma && (ctl1 & (3<<25))) {
- uint32_t dmactl = 0xc0000000 + cafe->datalen;
- /* If WR or RD bits set, set up DMA */
- if (ctl1 & (1<<26)) {
- /* It's a read */
- dmactl |= (1<<29);
- /* ... so it's done when the DMA is done, not just
- the command. */
- doneint = 0x10000000;
- }
- cafe_writel(cafe, dmactl, NAND_DMA_CTRL);
- }
- cafe->datalen = 0;
-
- if (unlikely(regdebug)) {
- int i;
- printk("About to write command %08x to register 0\n", ctl1);
- for (i=4; i< 0x5c; i+=4)
- printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
- }
-
- cafe_writel(cafe, ctl1, NAND_CTRL1);
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
- ndelay(100);
-
- if (1) {
- int c;
- uint32_t irqs;
-
- for (c = 500000; c != 0; c--) {
- irqs = cafe_readl(cafe, NAND_IRQ);
- if (irqs & doneint)
- break;
- udelay(1);
- if (!(c % 100000))
- cafe_dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs);
- cpu_relax();
- }
- cafe_writel(cafe, doneint, NAND_IRQ);
- cafe_dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n",
- command, 500000-c, irqs, cafe_readl(cafe, NAND_IRQ));
- }
-
- WARN_ON(cafe->ctl2 & (1<<30));
-
- switch (command) {
-
- case NAND_CMD_CACHEDPROG:
- case NAND_CMD_PAGEPROG:
- case NAND_CMD_ERASE1:
- case NAND_CMD_ERASE2:
- case NAND_CMD_SEQIN:
- case NAND_CMD_RNDIN:
- case NAND_CMD_STATUS:
- case NAND_CMD_DEPLETE1:
- case NAND_CMD_RNDOUT:
- case NAND_CMD_STATUS_ERROR:
- case NAND_CMD_STATUS_ERROR0:
- case NAND_CMD_STATUS_ERROR1:
- case NAND_CMD_STATUS_ERROR2:
- case NAND_CMD_STATUS_ERROR3:
- cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
- return;
- }
- nand_wait_ready(mtd);
- cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
-}
-
-static void cafe_select_chip(struct mtd_info *mtd, int chipnr)
-{
- //struct cafe_priv *cafe = mtd->priv;
- // cafe_dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr);
-}
-
-static int cafe_nand_interrupt(int irq, void *id)
-{
- struct mtd_info *mtd = id;
- struct cafe_priv *cafe = mtd->priv;
- uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
- cafe_writel(cafe, irqs & ~0x90000000, NAND_IRQ);
- if (!irqs)
- return IRQ_NONE;
-
- cafe_dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, cafe_readl(cafe, NAND_IRQ));
- return IRQ_HANDLED;
-}
-
-static void cafe_nand_bug(struct mtd_info *mtd)
-{
- BUG();
-}
-
-static int cafe_nand_write_oob(struct mtd_info *mtd,
- struct nand_chip *chip, int page)
-{
- int status = 0;
-
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
-
- return status & NAND_STATUS_FAIL ? -EIO : 0;
-}
-
-/* Don't use -- use nand_read_oob_std for now */
-static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
-{
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- return 1;
-}
-/**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- *
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
- */
-static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
-{
- struct cafe_priv *cafe = mtd->priv;
-
- cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
- cafe_readl(cafe, NAND_ECC_RESULT),
- cafe_readl(cafe, NAND_ECC_SYN01));
-
- chip->read_buf(mtd, buf, mtd->writesize);
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- if (checkecc && cafe_readl(cafe, NAND_ECC_RESULT) & (1<<18)) {
- unsigned short syn[8], pat[4];
- int pos[4];
- u8 *oob = chip->oob_poi;
- int i, n;
-
- for (i=0; i<8; i+=2) {
- uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2));
- syn[i] = cafe->rs->index_of[tmp & 0xfff];
- syn[i+1] = cafe->rs->index_of[(tmp >> 16) & 0xfff];
- }
-
- n = decode_rs16(cafe->rs, NULL, NULL, 1367, syn, 0, pos, 0,
- pat);
-
- for (i = 0; i < n; i++) {
- int p = pos[i];
-
- /* The 12-bit symbols are mapped to bytes here */
-
- if (p > 1374) {
- /* out of range */
- n = -1374;
- } else if (p == 0) {
- /* high four bits do not correspond to data */
- if (pat[i] > 0xff)
- n = -2048;
- else
- buf[0] ^= pat[i];
- } else if (p == 1365) {
- buf[2047] ^= pat[i] >> 4;
- oob[0] ^= pat[i] << 4;
- } else if (p > 1365) {
- if ((p & 1) == 1) {
- oob[3*p/2 - 2048] ^= pat[i] >> 4;
- oob[3*p/2 - 2047] ^= pat[i] << 4;
- } else {
- oob[3*p/2 - 2049] ^= pat[i] >> 8;
- oob[3*p/2 - 2048] ^= pat[i];
- }
- } else if ((p & 1) == 1) {
- buf[3*p/2] ^= pat[i] >> 4;
- buf[3*p/2 + 1] ^= pat[i] << 4;
- } else {
- buf[3*p/2 - 1] ^= pat[i] >> 8;
- buf[3*p/2] ^= pat[i];
- }
- }
-
- if (n < 0) {
- dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n",
- cafe_readl(cafe, NAND_ADDR2) * 2048);
- for (i = 0; i < 0x5c; i += 4)
- printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
- mtd->ecc_stats.failed++;
- } else {
- dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n);
- mtd->ecc_stats.corrected += n;
- }
- }
-
- return 0;
-}
-
-static struct nand_ecclayout cafe_oobinfo_2048 = {
- .eccbytes = 14,
- .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
- .oobfree = {{14, 50}}
-};
-
-/* Ick. The BBT code really ought to be able to work this bit out
- for itself from the above, at least for the 2KiB case */
-static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' };
-static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' };
-
-static uint8_t cafe_bbt_pattern_512[] = { 0xBB };
-static uint8_t cafe_mirror_pattern_512[] = { 0xBC };
-
-
-static struct nand_bbt_descr cafe_bbt_main_descr_2048 = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 14,
- .len = 4,
- .veroffs = 18,
- .maxblocks = 4,
- .pattern = cafe_bbt_pattern_2048
-};
-
-static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 14,
- .len = 4,
- .veroffs = 18,
- .maxblocks = 4,
- .pattern = cafe_mirror_pattern_2048
-};
-
-static struct nand_ecclayout cafe_oobinfo_512 = {
- .eccbytes = 14,
- .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
- .oobfree = {{14, 2}}
-};
-
-static struct nand_bbt_descr cafe_bbt_main_descr_512 = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 14,
- .len = 1,
- .veroffs = 15,
- .maxblocks = 4,
- .pattern = cafe_bbt_pattern_512
-};
-
-static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 14,
- .len = 1,
- .veroffs = 15,
- .maxblocks = 4,
- .pattern = cafe_mirror_pattern_512
-};
-
-
-static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
-{
- struct cafe_priv *cafe = mtd->priv;
-
- chip->write_buf(mtd, buf, mtd->writesize);
- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- /* Set up ECC autogeneration */
- cafe->ctl2 |= (1<<30);
-}
-
-static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw)
-{
- int status;
-
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
-
- if (unlikely(raw))
- chip->ecc.write_page_raw(mtd, chip, buf);
- else
- chip->ecc.write_page(mtd, chip, buf);
-
- /*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
- */
- cached = 0;
-
- if (!cached || !(chip->options & NAND_CACHEPRG)) {
-
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
- /*
- * See if operation failed and additional status checks are
- * available
- */
- if ((status & NAND_STATUS_FAIL) && (chip->errstat))
- status = chip->errstat(mtd, chip, FL_WRITING, status,
- page);
-
- if (status & NAND_STATUS_FAIL)
- return -EIO;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
- }
-
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
- /* Send command to read back the data */
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
- if (chip->verify_buf(mtd, buf, mtd->writesize))
- return -EIO;
-#endif
- return 0;
-}
-
-static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-{
- return 0;
-}
-
-/* F_2[X]/(X**6+X+1) */
-static unsigned short __devinit gf64_mul(u8 a, u8 b)
-{
- u8 c;
- unsigned int i;
-
- c = 0;
- for (i = 0; i < 6; i++) {
- if (a & 1)
- c ^= b;
- a >>= 1;
- b <<= 1;
- if ((b & 0x40) != 0)
- b ^= 0x43;
- }
-
- return c;
-}
-
-/* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X] */
-static u16 __devinit gf4096_mul(u16 a, u16 b)
-{
- u8 ah, al, bh, bl, ch, cl;
-
- ah = a >> 6;
- al = a & 0x3f;
- bh = b >> 6;
- bl = b & 0x3f;
-
- ch = gf64_mul(ah ^ al, bh ^ bl) ^ gf64_mul(al, bl);
- cl = gf64_mul(gf64_mul(ah, bh), 0x21) ^ gf64_mul(al, bl);
-
- return (ch << 6) ^ cl;
-}
-
-static int __devinit cafe_mul(int x)
-{
- if (x == 0)
- return 1;
- return gf4096_mul(x, 0xe01);
-}
-
-static int __devinit cafe_nand_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct mtd_info *mtd;
- struct cafe_priv *cafe;
- uint32_t ctrl;
- int err = 0;
-
- err = pci_enable_device(pdev);
- if (err)
- return err;
-
- pci_set_master(pdev);
-
- mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
- if (!mtd) {
- dev_warn(&pdev->dev, "failed to alloc mtd_info\n");
- return -ENOMEM;
- }
- cafe = (void *)(&mtd[1]);
-
- mtd->priv = cafe;
- mtd->owner = THIS_MODULE;
-
- cafe->pdev = pdev;
- cafe->mmio = pci_iomap(pdev, 0, 0);
- if (!cafe->mmio) {
- dev_warn(&pdev->dev, "failed to iomap\n");
- err = -ENOMEM;
- goto out_free_mtd;
- }
- cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
- &cafe->dmaaddr, GFP_KERNEL);
- if (!cafe->dmabuf) {
- err = -ENOMEM;
- goto out_ior;
- }
- cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
-
- cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8);
- if (!cafe->rs) {
- err = -ENOMEM;
- goto out_ior;
- }
-
- cafe->nand.cmdfunc = cafe_nand_cmdfunc;
- cafe->nand.dev_ready = cafe_device_ready;
- cafe->nand.read_byte = cafe_read_byte;
- cafe->nand.read_buf = cafe_read_buf;
- cafe->nand.write_buf = cafe_write_buf;
- cafe->nand.select_chip = cafe_select_chip;
-
- cafe->nand.chip_delay = 0;
-
- /* Enable the following for a flash based bad block table */
- cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
-
- if (skipbbt) {
- cafe->nand.options |= NAND_SKIP_BBTSCAN;
- cafe->nand.block_bad = cafe_nand_block_bad;
- }
-
- if (numtimings && numtimings != 3) {
- dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
- }
-
- if (numtimings == 3) {
- cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
- timing[0], timing[1], timing[2]);
- } else {
- timing[0] = cafe_readl(cafe, NAND_TIMING1);
- timing[1] = cafe_readl(cafe, NAND_TIMING2);
- timing[2] = cafe_readl(cafe, NAND_TIMING3);
-
- if (timing[0] | timing[1] | timing[2]) {
- cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n",
- timing[0], timing[1], timing[2]);
- } else {
- dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
- timing[0] = timing[1] = timing[2] = 0xffffffff;
- }
- }
-
- /* Start off by resetting the NAND controller completely */
- cafe_writel(cafe, 1, NAND_RESET);
- cafe_writel(cafe, 0, NAND_RESET);
-
- cafe_writel(cafe, timing[0], NAND_TIMING1);
- cafe_writel(cafe, timing[1], NAND_TIMING2);
- cafe_writel(cafe, timing[2], NAND_TIMING3);
-
- cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
- err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED,
- "CAFE NAND", mtd);
- if (err) {
- dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
- goto out_free_dma;
- }
-
- /* Disable master reset, enable NAND clock */
- ctrl = cafe_readl(cafe, GLOBAL_CTRL);
- ctrl &= 0xffffeff0;
- ctrl |= 0x00007000;
- cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
- cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
- cafe_writel(cafe, 0, NAND_DMA_CTRL);
-
- cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
- cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
-
- /* Set up DMA address */
- cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
- if (sizeof(cafe->dmaaddr) > 4)
- /* Shift in two parts to shut the compiler up */
- cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
- else
- cafe_writel(cafe, 0, NAND_DMA_ADDR1);
-
- cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
- cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
-
- /* Enable NAND IRQ in global IRQ mask register */
- cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
- cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
- cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
-
- /* Scan to find existence of the device */
- if (nand_scan_ident(mtd, 1)) {
- err = -ENXIO;
- goto out_irq;
- }
-
- cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
- if (mtd->writesize == 2048)
- cafe->ctl2 |= 1<<29; /* 2KiB page size */
-
- /* Set up ECC according to the type of chip we found */
- if (mtd->writesize == 2048) {
- cafe->nand.ecc.layout = &cafe_oobinfo_2048;
- cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
- cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
- } else if (mtd->writesize == 512) {
- cafe->nand.ecc.layout = &cafe_oobinfo_512;
- cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
- cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
- } else {
- printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
- mtd->writesize);
- goto out_irq;
- }
- cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- cafe->nand.ecc.size = mtd->writesize;
- cafe->nand.ecc.bytes = 14;
- cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
- cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
- cafe->nand.ecc.correct = (void *)cafe_nand_bug;
- cafe->nand.write_page = cafe_nand_write_page;
- cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
- cafe->nand.ecc.write_oob = cafe_nand_write_oob;
- cafe->nand.ecc.read_page = cafe_nand_read_page;
- cafe->nand.ecc.read_oob = cafe_nand_read_oob;
-
- err = nand_scan_tail(mtd);
- if (err)
- goto out_irq;
-
- pci_set_drvdata(pdev, mtd);
- add_mtd_device(mtd);
- goto out;
-
- out_irq:
- /* Disable NAND IRQ in global IRQ mask register */
- cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
- free_irq(pdev->irq, mtd);
- out_free_dma:
- dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
- out_ior:
- pci_iounmap(pdev, cafe->mmio);
- out_free_mtd:
- kfree(mtd);
- out:
- return err;
-}
-
-static void __devexit cafe_nand_remove(struct pci_dev *pdev)
-{
- struct mtd_info *mtd = pci_get_drvdata(pdev);
- struct cafe_priv *cafe = mtd->priv;
-
- del_mtd_device(mtd);
- /* Disable NAND IRQ in global IRQ mask register */
- cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
- free_irq(pdev->irq, mtd);
- nand_release(mtd);
- free_rs(cafe->rs);
- pci_iounmap(pdev, cafe->mmio);
- dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
- kfree(mtd);
-}
-
-static struct pci_device_id cafe_nand_tbl[] = {
- { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 }
-};
-
-MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
-
-static struct pci_driver cafe_nand_pci_driver = {
- .name = "CAFÉ NAND",
- .id_table = cafe_nand_tbl,
- .probe = cafe_nand_probe,
- .remove = __devexit_p(cafe_nand_remove),
-#ifdef CONFIG_PMx
- .suspend = cafe_nand_suspend,
- .resume = cafe_nand_resume,
-#endif
-};
-
-static int cafe_nand_init(void)
-{
- return pci_register_driver(&cafe_nand_pci_driver);
-}
-
-static void cafe_nand_exit(void)
-{
- pci_unregister_driver(&cafe_nand_pci_driver);
-}
-module_init(cafe_nand_init);
-module_exit(cafe_nand_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2 at infradead.org>");
-MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip");
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
new file mode 100644
index 0000000..05f6ec9
--- /dev/null
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -0,0 +1,838 @@
+/*
+ * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
+ *
+ * Copyright © 2006 Red Hat, Inc.
+ * Copyright © 2006 David Woodhouse <dwmw2 at infradead.org>
+ */
+
+#define DEBUG
+
+#include <linux/device.h>
+#undef DEBUG
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/rslib.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+
+#define CAFE_NAND_CTRL1 0x00
+#define CAFE_NAND_CTRL2 0x04
+#define CAFE_NAND_CTRL3 0x08
+#define CAFE_NAND_STATUS 0x0c
+#define CAFE_NAND_IRQ 0x10
+#define CAFE_NAND_IRQ_MASK 0x14
+#define CAFE_NAND_DATA_LEN 0x18
+#define CAFE_NAND_ADDR1 0x1c
+#define CAFE_NAND_ADDR2 0x20
+#define CAFE_NAND_TIMING1 0x24
+#define CAFE_NAND_TIMING2 0x28
+#define CAFE_NAND_TIMING3 0x2c
+#define CAFE_NAND_NONMEM 0x30
+#define CAFE_NAND_ECC_RESULT 0x3C
+#define CAFE_NAND_DMA_CTRL 0x40
+#define CAFE_NAND_DMA_ADDR0 0x44
+#define CAFE_NAND_DMA_ADDR1 0x48
+#define CAFE_NAND_ECC_SYN01 0x50
+#define CAFE_NAND_ECC_SYN23 0x54
+#define CAFE_NAND_ECC_SYN45 0x58
+#define CAFE_NAND_ECC_SYN67 0x5c
+#define CAFE_NAND_READ_DATA 0x1000
+#define CAFE_NAND_WRITE_DATA 0x2000
+
+#define CAFE_GLOBAL_CTRL 0x3004
+#define CAFE_GLOBAL_IRQ 0x3008
+#define CAFE_GLOBAL_IRQ_MASK 0x300c
+#define CAFE_NAND_RESET 0x3034
+
+struct cafe_priv {
+ struct nand_chip nand;
+ struct pci_dev *pdev;
+ void __iomem *mmio;
+ struct rs_control *rs;
+ uint32_t ctl1;
+ uint32_t ctl2;
+ int datalen;
+ int nr_data;
+ int data_pos;
+ int page_addr;
+ dma_addr_t dmaaddr;
+ unsigned char *dmabuf;
+};
+
+static int usedma = 1;
+module_param(usedma, int, 0644);
+
+static int skipbbt = 0;
+module_param(skipbbt, int, 0644);
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+static int regdebug = 0;
+module_param(regdebug, int, 0644);
+
+static int checkecc = 1;
+module_param(checkecc, int, 0644);
+
+static int numtimings;
+static int timing[3];
+module_param_array(timing, int, &numtimings, 0644);
+
+/* Hrm. Why isn't this already conditional on something in the struct device? */
+#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
+
+/* Make it easier to switch to PIO if we need to */
+#define cafe_readl(cafe, addr) readl((cafe)->mmio + CAFE_##addr)
+#define cafe_writel(cafe, datum, addr) writel(datum, (cafe)->mmio + CAFE_##addr)
+
+static int cafe_device_ready(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+ uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
+
+ cafe_writel(cafe, irqs, NAND_IRQ);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n",
+ result?"":" not", irqs, cafe_readl(cafe, NAND_IRQ),
+ cafe_readl(cafe, GLOBAL_IRQ), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+ return result;
+}
+
+
+static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(cafe->dmabuf + cafe->datalen, buf, len);
+ else
+ memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len);
+
+ cafe->datalen += len;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n",
+ len, cafe->datalen);
+}
+
+static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(buf, cafe->dmabuf + cafe->datalen, len);
+ else
+ memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n",
+ len, cafe->datalen);
+ cafe->datalen += len;
+}
+
+static uint8_t cafe_read_byte(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ uint8_t d;
+
+ cafe_read_buf(mtd, &d, 1);
+ cafe_dev_dbg(&cafe->pdev->dev, "Read %02x\n", d);
+
+ return d;
+}
+
+static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int adrbytes = 0;
+ uint32_t ctl1;
+ uint32_t doneint = 0x80000000;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n",
+ command, column, page_addr);
+
+ if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) {
+ /* Second half of a command we already calculated */
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | command, NAND_CTRL2);
+ ctl1 = cafe->ctl1;
+ cafe->ctl2 &= ~(1<<30);
+ cafe_dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n",
+ cafe->ctl1, cafe->nr_data);
+ goto do_command;
+ }
+ /* Reset ECC engine */
+ cafe_writel(cafe, 0, NAND_CTRL2);
+
+ /* Emulate NAND_CMD_READOOB on large-page chips */
+ if (mtd->writesize > 512 &&
+ command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* FIXME: Do we need to send read command before sending data
+ for small-page chips, to position the buffer correctly? */
+
+ if (column != -1) {
+ cafe_writel(cafe, column, NAND_ADDR1);
+ adrbytes = 2;
+ if (page_addr != -1)
+ goto write_adr2;
+ } else if (page_addr != -1) {
+ cafe_writel(cafe, page_addr & 0xffff, NAND_ADDR1);
+ page_addr >>= 16;
+ write_adr2:
+ cafe_writel(cafe, page_addr, NAND_ADDR2);
+ adrbytes += 2;
+ if (mtd->size > mtd->writesize << 16)
+ adrbytes++;
+ }
+
+ cafe->data_pos = cafe->datalen = 0;
+
+ /* Set command valid bit */
+ ctl1 = 0x80000000 | command;
+
+ /* Set RD or WR bits as appropriate */
+ if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) {
+ ctl1 |= (1<<26); /* rd */
+ /* Always 5 bytes, for now */
+ cafe->datalen = 4;
+ /* And one address cycle -- even for STATUS, since the controller doesn't work without */
+ adrbytes = 1;
+ } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) {
+ ctl1 |= 1<<26; /* rd */
+ /* For now, assume just read to end of page */
+ cafe->datalen = mtd->writesize + mtd->oobsize - column;
+ } else if (command == NAND_CMD_SEQIN)
+ ctl1 |= 1<<25; /* wr */
+
+ /* Set number of address bytes */
+ if (adrbytes)
+ ctl1 |= ((adrbytes-1)|8) << 27;
+
+ if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
+ /* Ignore the first command of a pair; the hardware
+ deals with them both at once, later */
+ cafe->ctl1 = ctl1;
+ cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
+ cafe->ctl1, cafe->datalen);
+ return;
+ }
+ /* RNDOUT and READ0 commands need a following byte */
+ if (command == NAND_CMD_RNDOUT)
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, NAND_CTRL2);
+ else if (command == NAND_CMD_READ0 && mtd->writesize > 512)
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2);
+
+ do_command:
+ cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
+ cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2));
+
+ /* NB: The datasheet lies -- we really should be subtracting 1 here */
+ cafe_writel(cafe, cafe->datalen, NAND_DATA_LEN);
+ cafe_writel(cafe, 0x90000000, NAND_IRQ);
+ if (usedma && (ctl1 & (3<<25))) {
+ uint32_t dmactl = 0xc0000000 + cafe->datalen;
+ /* If WR or RD bits set, set up DMA */
+ if (ctl1 & (1<<26)) {
+ /* It's a read */
+ dmactl |= (1<<29);
+ /* ... so it's done when the DMA is done, not just
+ the command. */
+ doneint = 0x10000000;
+ }
+ cafe_writel(cafe, dmactl, NAND_DMA_CTRL);
+ }
+ cafe->datalen = 0;
+
+ if (unlikely(regdebug)) {
+ int i;
+ printk("About to write command %08x to register 0\n", ctl1);
+ for (i=4; i< 0x5c; i+=4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+ }
+
+ cafe_writel(cafe, ctl1, NAND_CTRL1);
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ if (1) {
+ int c;
+ uint32_t irqs;
+
+ for (c = 500000; c != 0; c--) {
+ irqs = cafe_readl(cafe, NAND_IRQ);
+ if (irqs & doneint)
+ break;
+ udelay(1);
+ if (!(c % 100000))
+ cafe_dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs);
+ cpu_relax();
+ }
+ cafe_writel(cafe, doneint, NAND_IRQ);
+ cafe_dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n",
+ command, 500000-c, irqs, cafe_readl(cafe, NAND_IRQ));
+ }
+
+ WARN_ON(cafe->ctl2 & (1<<30));
+
+ switch (command) {
+
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_DEPLETE1:
+ case NAND_CMD_RNDOUT:
+ case NAND_CMD_STATUS_ERROR:
+ case NAND_CMD_STATUS_ERROR0:
+ case NAND_CMD_STATUS_ERROR1:
+ case NAND_CMD_STATUS_ERROR2:
+ case NAND_CMD_STATUS_ERROR3:
+ cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
+ return;
+ }
+ nand_wait_ready(mtd);
+ cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
+}
+
+static void cafe_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ //struct cafe_priv *cafe = mtd->priv;
+ // cafe_dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr);
+}
+
+static int cafe_nand_interrupt(int irq, void *id)
+{
+ struct mtd_info *mtd = id;
+ struct cafe_priv *cafe = mtd->priv;
+ uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
+ cafe_writel(cafe, irqs & ~0x90000000, NAND_IRQ);
+ if (!irqs)
+ return IRQ_NONE;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, cafe_readl(cafe, NAND_IRQ));
+ return IRQ_HANDLED;
+}
+
+static void cafe_nand_bug(struct mtd_info *mtd)
+{
+ BUG();
+}
+
+static int cafe_nand_write_oob(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int status = 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/* Don't use -- use nand_read_oob_std for now */
+static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 1;
+}
+/**
+ * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
+ */
+static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
+ cafe_readl(cafe, NAND_ECC_RESULT),
+ cafe_readl(cafe, NAND_ECC_SYN01));
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (checkecc && cafe_readl(cafe, NAND_ECC_RESULT) & (1<<18)) {
+ unsigned short syn[8], pat[4];
+ int pos[4];
+ u8 *oob = chip->oob_poi;
+ int i, n;
+
+ for (i=0; i<8; i+=2) {
+ uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2));
+ syn[i] = cafe->rs->index_of[tmp & 0xfff];
+ syn[i+1] = cafe->rs->index_of[(tmp >> 16) & 0xfff];
+ }
+
+ n = decode_rs16(cafe->rs, NULL, NULL, 1367, syn, 0, pos, 0,
+ pat);
+
+ for (i = 0; i < n; i++) {
+ int p = pos[i];
+
+ /* The 12-bit symbols are mapped to bytes here */
+
+ if (p > 1374) {
+ /* out of range */
+ n = -1374;
+ } else if (p == 0) {
+ /* high four bits do not correspond to data */
+ if (pat[i] > 0xff)
+ n = -2048;
+ else
+ buf[0] ^= pat[i];
+ } else if (p == 1365) {
+ buf[2047] ^= pat[i] >> 4;
+ oob[0] ^= pat[i] << 4;
+ } else if (p > 1365) {
+ if ((p & 1) == 1) {
+ oob[3*p/2 - 2048] ^= pat[i] >> 4;
+ oob[3*p/2 - 2047] ^= pat[i] << 4;
+ } else {
+ oob[3*p/2 - 2049] ^= pat[i] >> 8;
+ oob[3*p/2 - 2048] ^= pat[i];
+ }
+ } else if ((p & 1) == 1) {
+ buf[3*p/2] ^= pat[i] >> 4;
+ buf[3*p/2 + 1] ^= pat[i] << 4;
+ } else {
+ buf[3*p/2 - 1] ^= pat[i] >> 8;
+ buf[3*p/2] ^= pat[i];
+ }
+ }
+
+ if (n < 0) {
+ dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n",
+ cafe_readl(cafe, NAND_ADDR2) * 2048);
+ for (i = 0; i < 0x5c; i += 4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+ mtd->ecc_stats.failed++;
+ } else {
+ dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n);
+ mtd->ecc_stats.corrected += n;
+ }
+ }
+
+ return 0;
+}
+
+static struct nand_ecclayout cafe_oobinfo_2048 = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+ .oobfree = {{14, 50}}
+};
+
+/* Ick. The BBT code really ought to be able to work this bit out
+ for itself from the above, at least for the 2KiB case */
+static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' };
+static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' };
+
+static uint8_t cafe_bbt_pattern_512[] = { 0xBB };
+static uint8_t cafe_mirror_pattern_512[] = { 0xBC };
+
+
+static struct nand_bbt_descr cafe_bbt_main_descr_2048 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 4,
+ .veroffs = 18,
+ .maxblocks = 4,
+ .pattern = cafe_bbt_pattern_2048
+};
+
+static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 4,
+ .veroffs = 18,
+ .maxblocks = 4,
+ .pattern = cafe_mirror_pattern_2048
+};
+
+static struct nand_ecclayout cafe_oobinfo_512 = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+ .oobfree = {{14, 2}}
+};
+
+static struct nand_bbt_descr cafe_bbt_main_descr_512 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 1,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = cafe_bbt_pattern_512
+};
+
+static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 1,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = cafe_mirror_pattern_512
+};
+
+
+static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Set up ECC autogeneration */
+ cafe->ctl2 |= (1<<30);
+}
+
+static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+
+ if (unlikely(raw))
+ chip->ecc.write_page_raw(mtd, chip, buf);
+ else
+ chip->ecc.write_page(mtd, chip, buf);
+
+ /*
+ * Cached progamming disabled for now, Not sure if its worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ */
+ cached = 0;
+
+ if (!cached || !(chip->options & NAND_CACHEPRG)) {
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status,
+ page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ }
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ /* Send command to read back the data */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ if (chip->verify_buf(mtd, buf, mtd->writesize))
+ return -EIO;
+#endif
+ return 0;
+}
+
+static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ return 0;
+}
+
+/* F_2[X]/(X**6+X+1) */
+static unsigned short __devinit gf64_mul(u8 a, u8 b)
+{
+ u8 c;
+ unsigned int i;
+
+ c = 0;
+ for (i = 0; i < 6; i++) {
+ if (a & 1)
+ c ^= b;
+ a >>= 1;
+ b <<= 1;
+ if ((b & 0x40) != 0)
+ b ^= 0x43;
+ }
+
+ return c;
+}
+
+/* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X] */
+static u16 __devinit gf4096_mul(u16 a, u16 b)
+{
+ u8 ah, al, bh, bl, ch, cl;
+
+ ah = a >> 6;
+ al = a & 0x3f;
+ bh = b >> 6;
+ bl = b & 0x3f;
+
+ ch = gf64_mul(ah ^ al, bh ^ bl) ^ gf64_mul(al, bl);
+ cl = gf64_mul(gf64_mul(ah, bh), 0x21) ^ gf64_mul(al, bl);
+
+ return (ch << 6) ^ cl;
+}
+
+static int __devinit cafe_mul(int x)
+{
+ if (x == 0)
+ return 1;
+ return gf4096_mul(x, 0xe01);
+}
+
+static int __devinit cafe_nand_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct mtd_info *mtd;
+ struct cafe_priv *cafe;
+ uint32_t ctrl;
+ int err = 0;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_set_master(pdev);
+
+ mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
+ if (!mtd) {
+ dev_warn(&pdev->dev, "failed to alloc mtd_info\n");
+ return -ENOMEM;
+ }
+ cafe = (void *)(&mtd[1]);
+
+ mtd->priv = cafe;
+ mtd->owner = THIS_MODULE;
+
+ cafe->pdev = pdev;
+ cafe->mmio = pci_iomap(pdev, 0, 0);
+ if (!cafe->mmio) {
+ dev_warn(&pdev->dev, "failed to iomap\n");
+ err = -ENOMEM;
+ goto out_free_mtd;
+ }
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf) {
+ err = -ENOMEM;
+ goto out_ior;
+ }
+ cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
+
+ cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8);
+ if (!cafe->rs) {
+ err = -ENOMEM;
+ goto out_ior;
+ }
+
+ cafe->nand.cmdfunc = cafe_nand_cmdfunc;
+ cafe->nand.dev_ready = cafe_device_ready;
+ cafe->nand.read_byte = cafe_read_byte;
+ cafe->nand.read_buf = cafe_read_buf;
+ cafe->nand.write_buf = cafe_write_buf;
+ cafe->nand.select_chip = cafe_select_chip;
+
+ cafe->nand.chip_delay = 0;
+
+ /* Enable the following for a flash based bad block table */
+ cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+
+ if (skipbbt) {
+ cafe->nand.options |= NAND_SKIP_BBTSCAN;
+ cafe->nand.block_bad = cafe_nand_block_bad;
+ }
+
+ if (numtimings && numtimings != 3) {
+ dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
+ }
+
+ if (numtimings == 3) {
+ cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
+ timing[0], timing[1], timing[2]);
+ } else {
+ timing[0] = cafe_readl(cafe, NAND_TIMING1);
+ timing[1] = cafe_readl(cafe, NAND_TIMING2);
+ timing[2] = cafe_readl(cafe, NAND_TIMING3);
+
+ if (timing[0] | timing[1] | timing[2]) {
+ cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n",
+ timing[0], timing[1], timing[2]);
+ } else {
+ dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
+ timing[0] = timing[1] = timing[2] = 0xffffffff;
+ }
+ }
+
+ /* Start off by resetting the NAND controller completely */
+ cafe_writel(cafe, 1, NAND_RESET);
+ cafe_writel(cafe, 0, NAND_RESET);
+
+ cafe_writel(cafe, timing[0], NAND_TIMING1);
+ cafe_writel(cafe, timing[1], NAND_TIMING2);
+ cafe_writel(cafe, timing[2], NAND_TIMING3);
+
+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+ err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED,
+ "CAFE NAND", mtd);
+ if (err) {
+ dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
+ goto out_free_dma;
+ }
+
+ /* Disable master reset, enable NAND clock */
+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
+ ctrl &= 0xffffeff0;
+ ctrl |= 0x00007000;
+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
+
+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+
+ /* Set up DMA address */
+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
+ if (sizeof(cafe->dmaaddr) > 4)
+ /* Shift in two parts to shut the compiler up */
+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
+ else
+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
+ cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
+
+ /* Enable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+ cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+ cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+ /* Scan to find existence of the device */
+ if (nand_scan_ident(mtd, 1)) {
+ err = -ENXIO;
+ goto out_irq;
+ }
+
+ cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= 1<<29; /* 2KiB page size */
+
+ /* Set up ECC according to the type of chip we found */
+ if (mtd->writesize == 2048) {
+ cafe->nand.ecc.layout = &cafe_oobinfo_2048;
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
+ } else if (mtd->writesize == 512) {
+ cafe->nand.ecc.layout = &cafe_oobinfo_512;
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
+ } else {
+ printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
+ mtd->writesize);
+ goto out_irq;
+ }
+ cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.size = mtd->writesize;
+ cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
+ cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
+ cafe->nand.ecc.correct = (void *)cafe_nand_bug;
+ cafe->nand.write_page = cafe_nand_write_page;
+ cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
+ cafe->nand.ecc.write_oob = cafe_nand_write_oob;
+ cafe->nand.ecc.read_page = cafe_nand_read_page;
+ cafe->nand.ecc.read_oob = cafe_nand_read_oob;
+
+ err = nand_scan_tail(mtd);
+ if (err)
+ goto out_irq;
+
+ pci_set_drvdata(pdev, mtd);
+ add_mtd_device(mtd);
+ goto out;
+
+ out_irq:
+ /* Disable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
+ free_irq(pdev->irq, mtd);
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ out_ior:
+ pci_iounmap(pdev, cafe->mmio);
+ out_free_mtd:
+ kfree(mtd);
+ out:
+ return err;
+}
+
+static void __devexit cafe_nand_remove(struct pci_dev *pdev)
+{
+ struct mtd_info *mtd = pci_get_drvdata(pdev);
+ struct cafe_priv *cafe = mtd->priv;
+
+ del_mtd_device(mtd);
+ /* Disable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
+ free_irq(pdev->irq, mtd);
+ nand_release(mtd);
+ free_rs(cafe->rs);
+ pci_iounmap(pdev, cafe->mmio);
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ kfree(mtd);
+}
+
+static struct pci_device_id cafe_nand_tbl[] = {
+ { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
+
+static struct pci_driver cafe_nand_pci_driver = {
+ .name = "CAFÉ NAND",
+ .id_table = cafe_nand_tbl,
+ .probe = cafe_nand_probe,
+ .remove = __devexit_p(cafe_nand_remove),
+#ifdef CONFIG_PMx
+ .suspend = cafe_nand_suspend,
+ .resume = cafe_nand_resume,
+#endif
+};
+
+static int cafe_nand_init(void)
+{
+ return pci_register_driver(&cafe_nand_pci_driver);
+}
+
+static void cafe_nand_exit(void)
+{
+ pci_unregister_driver(&cafe_nand_pci_driver);
+}
+module_init(cafe_nand_init);
+module_exit(cafe_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2 at infradead.org>");
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip");
More information about the linux-mtd-cvs
mailing list