mtd/drivers/mtd/onenand Makefile.common, 1.1, 1.2 onenand_base.c,
1.2, 1.3
kyungmin.park at samsung.com
kyungmin.park at samsung.com
Sat Sep 3 02:15:48 EDT 2005
Update of /home/cvs/mtd/drivers/mtd/onenand
In directory phoenix.infradead.org:/tmp/cvs-serv6988/drivers/mtd/onenand
Modified Files:
Makefile.common onenand_base.c
Log Message:
[PATCH] OneNAND: Simple Bad Block handling support
- Based on NAND memory bbt
Index: Makefile.common
===================================================================
RCS file: /home/cvs/mtd/drivers/mtd/onenand/Makefile.common,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- Makefile.common 11 Jul 2005 10:39:27 -0000 1.1
+++ Makefile.common 3 Sep 2005 06:15:44 -0000 1.2
@@ -3,7 +3,9 @@
#
# Core functionality.
-obj-$(CONFIG_MTD_ONENAND) += onenand_base.o
+obj-$(CONFIG_MTD_ONENAND) += onenand.o
# Board specific.
obj-$(CONFIG_MTD_ONENAND_OMAP) += omap-onenand.o
+
+onenand-objs = onenand_base.o onenand_bbt.o
Index: onenand_base.c
===================================================================
RCS file: /home/cvs/mtd/drivers/mtd/onenand/onenand_base.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- onenand_base.c 3 Sep 2005 06:07:15 -0000 1.2
+++ onenand_base.c 3 Sep 2005 06:15:44 -0000 1.3
@@ -311,19 +311,21 @@
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x", ctrl);
- return -EIO;
+ /* It maybe occur at initial bad block */
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
+ /* Clear other interrupt bits for preventing ECC error */
+ interrupt &= ONENAND_INT_MASTER;
}
if (ctrl & ONENAND_CTRL_LOCK) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error = 0x%04x", ctrl);
- return -EIO;
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error = 0x%04x\n", ctrl);
+ return -EACCES;
}
if (interrupt & ONENAND_INT_READ) {
ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc & ONENAND_ECC_2BIT_ALL) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x", ecc);
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
return -EBADMSG;
}
}
@@ -1060,6 +1062,25 @@
}
/**
+ * onenand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * @param mtd MTD device structure
+ * @param ofs offset from device start
+ * @param getchip 0, if the chip is already selected
+ * @param allowbbt 1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad. Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int onenand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+
+ /* Return info from the table */
+ return bbm->isbad_bbt(mtd, ofs, allowbbt);
+}
+
+/**
* onenand_erase - [MTD Interface] erase block(s)
* @param mtd MTD device structure
* @param instr erase instruction
@@ -1109,7 +1130,12 @@
while (len) {
- /* TODO Check badblock */
+ /* Check if we have a bad block, we do not erase bad blocks */
+ if (onenand_block_checkbad(mtd, addr, 0, 0)) {
+ printk (KERN_WARNING "onenand_erase: attempt to erase a bad block at addr 0x%08x\n", (unsigned int) addr);
+ instr->state = MTD_ERASE_FAILED;
+ goto erase_exit;
+ }
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
@@ -1161,34 +1187,70 @@
onenand_release_device(mtd);
}
+
/**
* onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
+ *
+ * Check whether the block is bad
*/
static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
- /*
- * TODO
- * 1. Bad block table (BBT)
- * -> using NAND BBT to support JFFS2
- * 2. Bad block management (BBM)
- * -> bad block replace scheme
- *
- * Currently we do nothing
- */
- return 0;
+ /* Check for invalid offset */
+ if (ofs > mtd->size)
+ return -EINVAL;
+
+ return onenand_block_checkbad(mtd, ofs, 1, 0);
+}
+
+/**
+ * onenand_default_block_markbad - [DEFAULT] mark a block bad
+ * @param mtd MTD device structure
+ * @param ofs offset from device start
+ *
+ * This is the default implementation, which can be overridden by
+ * a hardware specific driver.
+ */
+static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+ u_char buf[2] = {0, 0};
+ size_t retlen;
+ int block;
+
+ /* Get block number */
+ block = ((int) ofs) >> bbm->bbt_erase_shift;
+ if (bbm->bbt)
+ bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* We write two bytes, so we dont have to mess with 16 bit access */
+ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+ return mtd->write_oob(mtd, ofs , 2, &retlen, buf);
}
/**
* onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
+ *
+ * Mark the block as bad
*/
static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- /* see above */
- return 0;
+ struct onenand_chip *this = mtd->priv;
+ int ret;
+
+ ret = onenand_block_isbad(mtd, ofs);
+ if (ret) {
+ /* If it was bad already, return success and do nothing */
+ if (ret > 0)
+ return 0;
+ return ret;
+ }
+
+ return this->block_markbad(mtd, ofs);
}
/**
@@ -1411,6 +1473,11 @@
if (!this->write_bufferram)
this->write_bufferram = onenand_write_bufferram;
+ if (!this->block_markbad)
+ this->block_markbad = onenand_default_block_markbad;
+ if (!this->scan_bbt)
+ this->scan_bbt = onenand_default_bbt;
+
if (onenand_probe(mtd))
return -ENXIO;
@@ -1472,7 +1539,7 @@
/* Unlock whole block */
mtd->unlock(mtd, 0x0, this->chipsize);
- return 0;
+ return this->scan_bbt(mtd);
}
/**
More information about the linux-mtd-cvs
mailing list