mtd/drivers/mtd/chips cfi_cmdset_0001.c,1.170,1.171

[gleixner at infradead.org]

Update of /home/cvs/mtd/drivers/mtd/chips
In directory phoenix.infradead.org:/tmp/cvs-serv5762

Modified Files:
	cfi_cmdset_0001.c 
Log Message:
MTD: cfi_cmdset_0001: Fix compiler warnings



Index: cfi_cmdset_0001.c
===================================================================
RCS file: /home/cvs/mtd/drivers/mtd/chips/cfi_cmdset_0001.c,v
retrieving revision 1.170
retrieving revision 1.171
diff -u -r1.170 -r1.171
--- cfi_cmdset_0001.c	16 Mar 2005 22:41:05 -0000	1.170
+++ cfi_cmdset_0001.c	19 Mar 2005 22:39:49 -0000	1.171
@@ -1707,24 +1707,24 @@
 		chipstatus = MERGESTATUS(status);
 
 		if ((chipstatus & 0x30) == 0x30) {
-			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
+			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%lx\n", chipstatus);
 			ret = -EIO;
 		} else if (chipstatus & 0x02) {
 			/* Protection bit set */
 			ret = -EROFS;
 		} else if (chipstatus & 0x8) {
 			/* Voltage */
-			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
+			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%lx\n", chipstatus);
 			ret = -EIO;
 		} else if (chipstatus & 0x20) {
 			if (retries--) {
-				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
+				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus);
 				timeo = jiffies + HZ;
 				put_chip(map, chip, adr);
 				spin_unlock(chip->mutex);
 				goto retry;
 			}
-			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
+			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%lx\n", adr, chipstatus);
 			ret = -EIO;
 		}
 	} else {