mtd/drivers/mtd/onenand Kconfig, NONE, 1.1 Makefile, NONE,
1.1 Makefile.common, NONE, 1.1 omap-onenand.c, NONE,
1.1 onenand_base.c, NONE, 1.1
gleixner at infradead.org
gleixner at infradead.org
Mon Jul 11 06:39:30 EDT 2005
Update of /home/cvs/mtd/drivers/mtd/onenand
In directory phoenix.infradead.org:/tmp/cvs-serv5905/onenand
Added Files:
Kconfig Makefile Makefile.common omap-onenand.c onenand_base.c
Log Message:
[MTD] Add initial support for OneNAND flash chips
OneNAND is a new flash technology from Samsung with integrated SRAM
buffers and logic interface.
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
--- NEW FILE Kconfig ---
#
# linux/drivers/mtd/onenand/Kconfig
#
menu "OneNAND Flash Device Drivers (EXPERIMENTAL)"
depends on MTD != n && EXPERIMENTAL
config MTD_ONENAND
tristate "OneNAND Device Support"
depends on MTD
help
This enables support for accessing all type of OneNAND flash
devices. For further information see
<http://www.samsung.com/Products/Semiconductor/Flash/OneNAND_TM/index.htm>.
config MTD_ONENAND_VERIFY_WRITE
bool "Verify OneNAND page writes"
depends on MTD_ONENAND
help
This adds an extra check when data is written to the flash. The
OneNAND flash device internally checks only bits transitioning
from 1 to 0. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
flipped accidentaly due to device wear or something else.
config MTD_ONENAND_OMAP
tristate "OneNAND Flash device on OMAP board"
depends on ARCH_OMAP && MTD_ONENAND
help
Support for OneNAND flash on TI OMAP board.
endmenu
***** Error reading new file: [Errno 2] No such file or directory: 'Makefile'
--- NEW FILE Makefile.common ---
#
# Makefile for the OneNAND MTD
#
# Core functionality.
obj-$(CONFIG_MTD_ONENAND) += onenand_base.o
# Board specific.
obj-$(CONFIG_MTD_ONENAND_OMAP) += omap-onenand.o
--- NEW FILE omap-onenand.c ---
/*
* linux/drivers/mtd/onenand/omap-onenand.c
*
* Copyright (c) 2005 Samsung Electronics
* Kyungmin Park <kyungmin.park at samsung.com>
*
* Derived from linux/drivers/mtd/nand/omap-nand-flash.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Overview:
* This is a device driver for the OneNAND flash device for TI OMAP boards.
*/
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/tc.h>
#include <asm/sizes.h>
#define OMAP_ONENAND_FLASH_START1 OMAP_CS2A_PHYS
#define OMAP_ONENAND_FLASH_START2 OMAP_CS0_PHYS
/*
* MTD structure for OMAP board
*/
static struct mtd_info *omap_onenand_mtd = NULL;
/*
* Define partitions for flash devices
*/
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition static_partition[] = {
{
.name = "X-Loader + U-Boot",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE /* force read-only */
},
{
.name = "U-Boot Environment",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE /* force read-only */
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 2 * SZ_1M
},
{
.name = "filesystem0",
.offset = MTDPART_OFS_APPEND,
.size = SZ_16M,
},
{
.name = "filesystem1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
const char *part_probes[] = { "cmdlinepart", NULL, };
#endif
/* Scan to find existance of the device at base.
This also allocates oob and data internal buffers */
static char onenand_name[] = "onenand";
/*
* Main initialization routine
*/
static int __init omap_onenand_init (void)
{
struct onenand_chip *this;
struct mtd_partition *dynamic_partition = 0;
int err = 0;
/* Allocate memory for MTD device structure and private data */
omap_onenand_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct onenand_chip),
GFP_KERNEL);
if (!omap_onenand_mtd) {
printk (KERN_WARNING "Unable to allocate OneNAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
/* Get pointer to private data */
this = (struct onenand_chip *) (&omap_onenand_mtd[1]);
/* Initialize structures */
memset((char *) omap_onenand_mtd, 0, sizeof(struct mtd_info) + sizeof(struct onenand_chip));
/* Link the private data with the MTD structure */
omap_onenand_mtd->priv = this;
/* try the first address */
this->base = ioremap(OMAP_ONENAND_FLASH_START1, SZ_128K);
omap_onenand_mtd->name = onenand_name;
if (onenand_scan(omap_onenand_mtd, 1)){
/* try the second address */
iounmap(this->base);
this->base = ioremap(OMAP_ONENAND_FLASH_START2, SZ_128K);
if (onenand_scan(omap_onenand_mtd, 1)) {
iounmap(this->base);
err = -ENXIO;
goto out_mtd;
}
}
/* Register the partitions */
switch (omap_onenand_mtd->size) {
case SZ_128M:
case SZ_64M:
case SZ_32M:
#ifdef CONFIG_MTD_PARTITIONS
err = parse_mtd_partitions(omap_onenand_mtd, part_probes,
&dynamic_partition, 0);
if (err > 0)
err = add_mtd_partitions(omap_onenand_mtd,
dynamic_partition, err);
else if (1)
err = add_mtd_partitions(omap_onenand_mtd,
static_partition,
ARRAY_SIZE(static_partition));
else
#endif
err = add_mtd_device(omap_onenand_mtd);
if (err)
goto out_buf;
break;
default:
printk(KERN_WARNING "Unsupported OneNAND device\n");
err = -ENXIO;
goto out_buf;
}
return 0;
out_buf:
onenand_release(omap_onenand_mtd);
iounmap(this->base);
out_mtd:
kfree(omap_onenand_mtd);
out:
return err;
}
/*
* Clean up routine
*/
static void __exit omap_onenand_cleanup (void)
{
struct onenand_chip *this = omap_onenand_mtd->priv;
/* onenand_release frees MTD partitions, MTD structure
and onenand internal buffers */
onenand_release(omap_onenand_mtd);
iounmap(this->base);
kfree(omap_onenand_mtd);
}
module_init(omap_onenand_init);
module_exit(omap_onenand_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kyungmin Park <kyungmin.park at samsung.com>");
MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP boards");
--- NEW FILE onenand_base.c ---
/*
* linux/drivers/mtd/onenand/onenand_base.c
*
* Copyright (C) 2005 Samsung Electronics
* Kyungmin Park <kyungmin.park at samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
[...1423 lines suppressed...]
/**
* onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
* @param mtd MTD device structure
*/
void onenand_release(struct mtd_info *mtd)
{
#ifdef CONFIG_MTD_PARTITIONS
/* Deregister partitions */
del_mtd_partitions (mtd);
#endif
/* Deregister the device */
del_mtd_device (mtd);
}
EXPORT_SYMBOL_GPL(onenand_scan);
EXPORT_SYMBOL_GPL(onenand_release);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kyungmin Park <kyungmin.park at samsung.com>");
MODULE_DESCRIPTION("Generic OneNAND flash driver code");
More information about the linux-mtd-cvs
mailing list