mtd/drivers/mtd/nand nand_base.c,1.128,1.129
dmarlin at infradead.org
dmarlin at infradead.org
Sun Jan 23 13:30:53 EST 2005
Update of /home/cvs/mtd/drivers/mtd/nand
In directory phoenix.infradead.org:/tmp/cvs-serv17821/drivers/mtd/nand
Modified Files:
nand_base.c
Log Message:
Replace some literals with defined symbols.
Index: nand_base.c
===================================================================
RCS file: /home/cvs/mtd/drivers/mtd/nand/nand_base.c,v
retrieving revision 1.128
retrieving revision 1.129
diff -u -r1.128 -r1.129
--- nand_base.c 18 Jan 2005 16:14:56 -0000 1.128
+++ nand_base.c 23 Jan 2005 18:30:50 -0000 1.129
@@ -480,7 +480,7 @@
struct nand_chip *this = mtd->priv;
/* Check the WP bit */
this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
- return (this->read_byte(mtd) & 0x80) ? 0 : 1;
+ return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
}
/**
@@ -585,7 +585,7 @@
this->hwcontrol(mtd, NAND_CTL_SETCLE);
this->write_byte(mtd, NAND_CMD_STATUS);
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- while ( !(this->read_byte(mtd) & 0x40));
+ while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
return;
/* This applies to read commands */
@@ -692,7 +692,7 @@
this->hwcontrol(mtd, NAND_CTL_SETCLE);
this->write_byte(mtd, NAND_CMD_STATUS);
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- while ( !(this->read_byte(mtd) & 0x40));
+ while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
return;
case NAND_CMD_READ0:
@@ -897,7 +897,7 @@
/* call wait ready function */
status = this->waitfunc (mtd, this, FL_WRITING);
/* See if device thinks it succeeded */
- if (status & 0x01) {
+ if (status & NAND_STATUS_FAIL) {
DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
return -EIO;
}
@@ -1758,7 +1758,7 @@
status = this->waitfunc (mtd, this, FL_WRITING);
/* See if device thinks it succeeded */
- if (status & 0x01) {
+ if (status & NAND_STATUS_FAIL) {
DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
ret = -EIO;
goto out;
@@ -2104,7 +2104,7 @@
status = this->waitfunc (mtd, this, FL_ERASING);
/* See if block erase succeeded */
- if (status & 0x01) {
+ if (status & NAND_STATUS_FAIL) {
DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = (page << this->page_shift);
More information about the linux-mtd-cvs
mailing list