mtd/drivers/mtd/maps Config.in,1.41,1.42 Makefile,1.35,1.36

David Woodhouse dwmw2 at infradead.org
Fri Jan 24 08:24:51 EST 2003


Update of /home/cvs/mtd/drivers/mtd/maps
In directory phoenix.infradead.org:/tmp/cvs-serv22383

Modified Files:
	Config.in Makefile 
Log Message:
Add NatSemi SCx200 DOCCS driver, some cleanups

Index: Config.in
===================================================================
RCS file: /home/cvs/mtd/drivers/mtd/maps/Config.in,v
retrieving revision 1.41
retrieving revision 1.42
diff -u -r1.41 -r1.42
--- Config.in	18 Oct 2002 22:45:48 -0000	1.41
+++ Config.in	24 Jan 2003 13:24:48 -0000	1.42
@@ -30,11 +30,12 @@
    dep_tristate '  JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC
    dep_tristate '  JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC
    dep_tristate '  JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC
+   dep_tristate '  Flash device mapped with DOCCS on NatSemi SCx200' CONFIG_MTD_SCx200_DOCFLASH $CONFIG_MTD_CFI
    dep_tristate '  BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_MTD_JEDECPROBE
-   dep_tristate ' ROM connected to AMD76X southbridge' CONFIG_MTD_AMD76XROM $CONFIG_MTD_GEN_PROBE   
-   dep_tristate ' ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBE
+   dep_tristate '  ROM connected to AMD76X southbridge' CONFIG_MTD_AMD76XROM $CONFIG_MTD_GEN_PROBE   
+   dep_tristate '  ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBE
    dep_tristate '  CFI Flash device mapped on SnapGear/SecureEdge' CONFIG_MTD_NETtel $CONFIG_MTD_PARTITIONS
-   dep_tristate ' BIOS flash chip on Intel SCB2 boards' CONFIG_MTD_SCB2_FLASH $CONFIG_MTD_GEN_PROBE
+   dep_tristate '  BIOS flash chip on Intel SCB2 boards' CONFIG_MTD_SCB2_FLASH $CONFIG_MTD_GEN_PROBE
 fi
 
 if [ "$CONFIG_PPC" = "y" ]; then
@@ -53,7 +54,7 @@
    if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" \
 	-o "$CONFIG_MTD_PB1100" = "y" -o "$CONFIG_MTD_PB1100" = "m" ]; then
       bool '  Pb[15]00 boot flash device' CONFIG_MTD_PB1500_BOOT 
-      bool '  Pb[15]00 user flash device (2nd 32MB bank)' CONFIG_MTD_PB1500_USER
+      bool '  Pb[15]00 user flash device (2nd 32MiB bank)' CONFIG_MTD_PB1500_USER
    fi
    dep_tristate '  Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS 
    if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then

Index: Makefile
===================================================================
RCS file: /home/cvs/mtd/drivers/mtd/maps/Makefile,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36
--- Makefile	27 Nov 2002 10:27:41 -0000	1.35
+++ Makefile	24 Jan 2003 13:24:48 -0000	1.36
@@ -44,13 +44,14 @@
 obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
 obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_uflash.o
 obj-$(CONFIG_MTD_VMAX)		+= vmax301.o
+obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
 obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
 obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
 obj-$(CONFIG_MTD_PB1000)	+= pb1xxx-flash.o
-obj-$(CONFIG_MTD_PB1500)	+= pb1xxx-flash.o
 obj-$(CONFIG_MTD_PB1100)	+= pb1xxx-flash.o
+obj-$(CONFIG_MTD_PB1500)	+= pb1xxx-flash.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o





More information about the linux-mtd-cvs mailing list