[    0.000000] Linux version 6.12.61-6.12-alt1 (builder@localhost.localdomain) (gcc-13 (GCC) 13.2.1 20240128 (ALT Sisyphus 13.2.1-alt3), GNU ld (GNU Binutils) 2.41.0.20230826) #1 SMP PREEMPT_DYNAMIC Thu Dec 11 13:04:56 UTC 2025
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.61-6.12-alt1 root=UUID=9e382646-bf7e-43b5-925d-45491d8567c0 ro resume=/dev/disk/by-uuid/8b5c23a1-b01f-42b5-8056-47610b5296f0 panic=30 quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fd98fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fd99000-0x0000000040698fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040699000-0x00000000424aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000424af000-0x00000000442fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000442ff000-0x0000000044b2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000044b2f000-0x0000000044bfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000044bff000-0x0000000044bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000044c00000-0x0000000048ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000049e00000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff500000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b07fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.7 by INSYDE Corp.
[    0.000000] efi: ACPI=0x44bfe000 ACPI 2.0=0x44bfe014 TPMFinalLog=0x44ac5000 SMBIOS=0x429de000 SMBIOS 3.0=0x429dc000 ESRT=0x3bf93a98 INITRD=0x3bf15a98 RNG=0x44b78018 TPMEventLog=0x44b76018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem69: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[    0.000000] efi: Not removing mem70: MMIO range=[0xfe010000-0xfe010fff] (4KB) from e820 map
[    0.000000] efi: Remove mem72: MMIO range=[0xff500000-0xffffffff] (11MB) from e820 map
[    0.000000] e820: remove [mem 0xff500000-0xffffffff] reserved
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Acer Aspire A517-52/Jasmine_TL, BIOS V1.20 11/03/2021
[    0.000000] DMI: Memory slots populated: 2/2
[    0.000000] tsc: Detected 2400.000 MHz processor
[    0.000000] tsc: Detected 2419.200 MHz TSC
[    0.000005] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000012] last_pfn = 0x2b0800 max_arch_pfn = 0x400000000
[    0.000015] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000016] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000385] last_pfn = 0x44c00 max_arch_pfn = 0x400000000
[    0.007799] esrt: Reserving ESRT space from 0x000000003bf93a98 to 0x000000003bf93ad0.
[    0.007803] e820: update [mem 0x3bf93000-0x3bf93fff] usable ==> reserved
[    0.007814] Using GB pages for direct mapping
[    0.008271] Secure boot disabled
[    0.008271] RAMDISK: [mem 0x383bf000-0x39e34fff]
[    0.008274] ACPI: Early table checksum verification disabled
[    0.008277] ACPI: RSDP 0x0000000044BFE014 000024 (v02 ACRSYS)
[    0.008279] ACPI: XSDT 0x0000000044BDA188 000114 (v01 ACRSYS ACRPRDCT 00000002      01000013)
[    0.008283] ACPI: FACP 0x0000000044BDE000 000114 (v06 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008286] ACPI: DSDT 0x0000000044B80000 059940 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008288] ACPI: FACS 0x0000000044AA2000 000040
[    0.008290] ACPI: UEFI 0x0000000044B2E000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.008292] ACPI: SSDT 0x0000000044BFA000 00255C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008294] ACPI: SSDT 0x0000000044BF9000 000100 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008296] ACPI: SSDT 0x0000000044BF6000 002137 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008297] ACPI: SSDT 0x0000000044BF2000 003300 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008299] ACPI: SSDT 0x0000000044BF1000 00077B (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008301] ACPI: TPM2 0x0000000044BF0000 00004C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008303] ACPI: SSDT 0x0000000044BEE000 000D02 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008305] ACPI: NHLT 0x0000000044BEC000 001B54 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008307] ACPI: LPIT 0x0000000044BEB000 0000CC (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008309] ACPI: WSMT 0x0000000044BEA000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008311] ACPI: SSDT 0x0000000044BE9000 000B70 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008312] ACPI: SSDT 0x0000000044BE8000 00012A (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008314] ACPI: DBGP 0x0000000044BE7000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008316] ACPI: DBG2 0x0000000044BE6000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008318] ACPI: SSDT 0x0000000044BDF000 006A45 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008320] ACPI: HPET 0x0000000044BDD000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008322] ACPI: APIC 0x0000000044BDC000 00012C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008324] ACPI: MCFG 0x0000000044BDB000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008326] ACPI: SSDT 0x0000000044BFD000 000C78 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008328] ACPI: DMAR 0x0000000044B7F000 000088 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008329] ACPI: UEFI 0x0000000044A9F000 00063A (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008331] ACPI: UEFI 0x0000000044A9E000 00005C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008333] ACPI: SSDT 0x0000000044B7E000 000985 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008335] ACPI: SSDT 0x0000000044B7D000 0000F8 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008337] ACPI: SSDT 0x0000000044B7C000 000835 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008338] ACPI: FPDT 0x0000000044B7B000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008340] ACPI: PTDT 0x0000000044B79000 000CFE (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[    0.008342] ACPI: BGRT 0x0000000044B7A000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.008343] ACPI: Reserving FACP table memory at [mem 0x44bde000-0x44bde113]
[    0.008344] ACPI: Reserving DSDT table memory at [mem 0x44b80000-0x44bd993f]
[    0.008345] ACPI: Reserving FACS table memory at [mem 0x44aa2000-0x44aa203f]
[    0.008345] ACPI: Reserving UEFI table memory at [mem 0x44b2e000-0x44b2e235]
[    0.008346] ACPI: Reserving SSDT table memory at [mem 0x44bfa000-0x44bfc55b]
[    0.008346] ACPI: Reserving SSDT table memory at [mem 0x44bf9000-0x44bf90ff]
[    0.008347] ACPI: Reserving SSDT table memory at [mem 0x44bf6000-0x44bf8136]
[    0.008347] ACPI: Reserving SSDT table memory at [mem 0x44bf2000-0x44bf52ff]
[    0.008348] ACPI: Reserving SSDT table memory at [mem 0x44bf1000-0x44bf177a]
[    0.008348] ACPI: Reserving TPM2 table memory at [mem 0x44bf0000-0x44bf004b]
[    0.008349] ACPI: Reserving SSDT table memory at [mem 0x44bee000-0x44beed01]
[    0.008349] ACPI: Reserving NHLT table memory at [mem 0x44bec000-0x44bedb53]
[    0.008350] ACPI: Reserving LPIT table memory at [mem 0x44beb000-0x44beb0cb]
[    0.008350] ACPI: Reserving WSMT table memory at [mem 0x44bea000-0x44bea027]
[    0.008351] ACPI: Reserving SSDT table memory at [mem 0x44be9000-0x44be9b6f]
[    0.008351] ACPI: Reserving SSDT table memory at [mem 0x44be8000-0x44be8129]
[    0.008352] ACPI: Reserving DBGP table memory at [mem 0x44be7000-0x44be7033]
[    0.008352] ACPI: Reserving DBG2 table memory at [mem 0x44be6000-0x44be6053]
[    0.008353] ACPI: Reserving SSDT table memory at [mem 0x44bdf000-0x44be5a44]
[    0.008353] ACPI: Reserving HPET table memory at [mem 0x44bdd000-0x44bdd037]
[    0.008353] ACPI: Reserving APIC table memory at [mem 0x44bdc000-0x44bdc12b]
[    0.008354] ACPI: Reserving MCFG table memory at [mem 0x44bdb000-0x44bdb03b]
[    0.008354] ACPI: Reserving SSDT table memory at [mem 0x44bfd000-0x44bfdc77]
[    0.008355] ACPI: Reserving DMAR table memory at [mem 0x44b7f000-0x44b7f087]
[    0.008355] ACPI: Reserving UEFI table memory at [mem 0x44a9f000-0x44a9f639]
[    0.008356] ACPI: Reserving UEFI table memory at [mem 0x44a9e000-0x44a9e05b]
[    0.008356] ACPI: Reserving SSDT table memory at [mem 0x44b7e000-0x44b7e984]
[    0.008357] ACPI: Reserving SSDT table memory at [mem 0x44b7d000-0x44b7d0f7]
[    0.008357] ACPI: Reserving SSDT table memory at [mem 0x44b7c000-0x44b7c834]
[    0.008358] ACPI: Reserving FPDT table memory at [mem 0x44b7b000-0x44b7b043]
[    0.008358] ACPI: Reserving PTDT table memory at [mem 0x44b79000-0x44b79cfd]
[    0.008359] ACPI: Reserving BGRT table memory at [mem 0x44b7a000-0x44b7a037]
[    0.008571] No NUMA configuration found
[    0.008571] Faking a node at [mem 0x0000000000000000-0x00000002b07fffff]
[    0.008576] NODE_DATA(0) allocated [mem 0x2b07d5a00-0x2b07fffff]
[    0.008679] Zone ranges:
[    0.008680]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008681]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008682]   Normal   [mem 0x0000000100000000-0x00000002b07fffff]
[    0.008683]   Device   empty
[    0.008683] Movable zone start for each node
[    0.008684] Early memory node ranges
[    0.008685]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008686]   node   0: [mem 0x0000000000100000-0x000000003fd98fff]
[    0.008686]   node   0: [mem 0x0000000040699000-0x00000000424aefff]
[    0.008687]   node   0: [mem 0x0000000044bff000-0x0000000044bfffff]
[    0.008687]   node   0: [mem 0x0000000100000000-0x00000002b07fffff]
[    0.008688] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b07fffff]
[    0.008691] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008706] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009933] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.009992] On node 0, zone DMA32: 10064 pages in unavailable ranges
[    0.018619] On node 0, zone Normal: 13312 pages in unavailable ranges
[    0.018791] On node 0, zone Normal: 30720 pages in unavailable ranges
[    0.018811] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[    0.019163] ACPI: PM-Timer IO Port: 0x1808
[    0.019169] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.019170] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.019171] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.019171] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.019172] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.019172] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.019172] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.019173] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.019173] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.019174] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.019174] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.019175] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.019175] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.019175] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.019176] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.019176] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.019212] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.019214] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.019215] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.019218] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.019219] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.019224] e820: update [mem 0x3bf95000-0x3c088fff] usable ==> reserved
[    0.019232] TSC deadline timer available
[    0.019234] CPU topo: Max. logical packages:   1
[    0.019235] CPU topo: Max. logical dies:       1
[    0.019235] CPU topo: Max. dies per package:   1
[    0.019238] CPU topo: Max. threads per core:   2
[    0.019238] CPU topo: Num. cores per package:     4
[    0.019239] CPU topo: Num. threads per package:   8
[    0.019239] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[    0.019248] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.019249] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.019250] PM: hibernation: Registered nosave memory: [mem 0x3bf93000-0x3bf93fff]
[    0.019251] PM: hibernation: Registered nosave memory: [mem 0x3bf95000-0x3c088fff]
[    0.019252] PM: hibernation: Registered nosave memory: [mem 0x3fd99000-0x40698fff]
[    0.019253] PM: hibernation: Registered nosave memory: [mem 0x424af000-0x44bfefff]
[    0.019253] PM: hibernation: Registered nosave memory: [mem 0x44c00000-0xffffffff]
[    0.019254] [mem 0x4f800000-0xfe00ffff] available for PCI devices
[    0.019255] Booting paravirtualized kernel on bare hardware
[    0.019257] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.023620] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.024044] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.024047] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.024049] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
[    0.024060] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.61-6.12-alt1 root=UUID=9e382646-bf7e-43b5-925d-45491d8567c0 ro resume=/dev/disk/by-uuid/8b5c23a1-b01f-42b5-8056-47610b5296f0 panic=30 quiet splash
[    0.024101] Unknown kernel command line parameters "splash", will be passed to user space.
[    0.024756] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.025081] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.025163] Fallback order for Node 0: 0 
[    0.025165] Built 1 zonelists, mobility grouping on.  Total pages: 2040654
[    0.025166] Policy zone: Normal
[    0.025171] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.025178] software IO TLB: area num 8.
[    0.048093] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.048119] ftrace: allocating 49135 entries in 192 pages
[    0.053844] ftrace: allocated 192 pages with 2 groups
[    0.054427] Dynamic Preempt: voluntary
[    0.054460] rcu: Preemptible hierarchical RCU implementation.
[    0.054460] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.054461] 	Trampoline variant of Tasks RCU enabled.
[    0.054462] 	Rude variant of Tasks RCU enabled.
[    0.054462] 	Tracing variant of Tasks RCU enabled.
[    0.054462] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.054463] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.054468] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.054469] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.054470] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.056578] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.056858] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.057070] Console: colour dummy device 80x25
[    0.057072] printk: legacy console [tty0] enabled
[    0.057098] ACPI: Core revision 20240827
[    0.057320] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.057405] APIC: Switch to symmetric I/O mode setup
[    0.057406] DMAR: Host address width 39
[    0.057407] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.057412] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[    0.057414] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.057419] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.057421] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[    0.057423] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.057424] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.057424] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.059014] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.059016] x2apic enabled
[    0.059072] APIC: Switched APIC routing to: cluster x2apic
[    0.063565] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
[    0.063570] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200)
[    0.063594] CPU0: Thermal monitoring enabled (TM1)
[    0.063596] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.063706] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.063707] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.063709] process: using mwait in idle threads
[    0.063711] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.063712] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
[    0.063713] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.063714] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.063715] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.063716] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.063718] GDS: Mitigation: Microcode
[    0.063719] active return thunk: its_return_thunk
[    0.063722] ITS: Mitigation: Aligned branch/return thunks
[    0.063728] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.063729] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.063729] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.063730] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.063731] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.063731] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.063732] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.063732] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.063733] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.063734] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.063735] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.063735] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.063736] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.063737] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
[    0.063738] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format.
[    0.064568] Freeing SMP alternatives memory: 44K
[    0.064568] pid_max: default: 32768 minimum: 301
[    0.064568] LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,bpf,altha,kiosk,ima,evm
[    0.064568] landlock: Up and running.
[    0.064568] Yama: becoming mindful.
[    0.064568] LSM support for eBPF active
[    0.064568] AltHa disabled.
[    0.064568] Kiosk: Netlink family registered.
[    0.064568] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.064568] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.064568] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[    0.064568] Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.064568] ... version:                5
[    0.064568] ... bit width:              48
[    0.064568] ... generic registers:      8
[    0.064568] ... value mask:             0000ffffffffffff
[    0.064568] ... max period:             00007fffffffffff
[    0.064568] ... fixed-purpose events:   4
[    0.064568] ... event mask:             0001000f000000ff
[    0.064568] signal: max sigframe size: 3632
[    0.064568] Estimated ratio of average max frequency by base frequency (times 1024): 1621
[    0.064568] rcu: Hierarchical SRCU implementation.
[    0.064568] rcu: 	Max phase no-delay instances is 400.
[    0.064568] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.065319] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.065371] smp: Bringing up secondary CPUs ...
[    0.065436] smpboot: x86: Booting SMP configuration:
[    0.065437] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.069619] smp: Brought up 1 node, 8 CPUs
[    0.069619] ----------------
[    0.069619] | NMI testsuite:
[    0.069619] --------------------
[    0.069619]   remote IPI:  ok  |
[    0.069619]    local IPI:  ok  |
[    0.069619] --------------------
[    0.069619] Good, all   2 testcases passed! |
[    0.069619] ---------------------------------
[    0.069619] smpboot: Total of 8 processors activated (38707.20 BogoMIPS)
[    0.070613] Memory: 7855196K/8162616K available (18432K kernel code, 2656K rwdata, 12288K rodata, 4276K init, 4300K bss, 287896K reserved, 0K cma-reserved)
[    0.070766] devtmpfs: initialized
[    0.070766] x86/mm: Memory block size: 128MB
[    0.071159] ACPI: PM: Registering ACPI NVS region [mem 0x442ff000-0x44b2efff] (8585216 bytes)
[    0.071159] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.071159] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.071573] pinctrl core: initialized pinctrl subsystem
[    0.071938] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.072079] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.072136] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.072195] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.072201] audit: initializing netlink subsys (disabled)
[    0.072207] audit: type=2000 audit(1775716007.008:1): state=initialized audit_enabled=0 res=1
[    0.072207] thermal_sys: Registered thermal governor 'fair_share'
[    0.072207] thermal_sys: Registered thermal governor 'bang_bang'
[    0.072207] thermal_sys: Registered thermal governor 'step_wise'
[    0.072207] thermal_sys: Registered thermal governor 'user_space'
[    0.072207] cpuidle: using governor ladder
[    0.072207] cpuidle: using governor menu
[    0.072207] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.072207] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
[    0.072207] PCI: Using configuration type 1 for base access
[    0.072207] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.072599] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.072599] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.072599] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.072599] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.072640] ACPI: Added _OSI(Module Device)
[    0.072640] ACPI: Added _OSI(Processor Device)
[    0.072640] ACPI: Added _OSI(Processor Aggregator Device)
[    0.106039] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106043] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106045] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106047] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106049] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106050] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106133] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106135] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106136] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106137] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106139] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106141] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106142] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106144] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106146] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106147] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106149] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106150] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106152] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106153] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106155] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106156] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106158] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106159] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106161] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106163] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106164] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106165] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106167] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106168] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106170] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106172] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106173] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106174] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106176] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106177] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106179] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106181] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106182] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106183] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106185] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106186] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106188] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106190] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106191] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106192] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106194] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106195] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106292] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106293] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106295] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106296] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106298] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106299] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106380] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106382] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106383] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106385] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106386] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106388] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106499] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106501] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106503] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106504] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106506] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106507] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106509] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106510] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106512] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106513] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106515] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106516] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106518] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106519] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106521] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106522] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106524] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106525] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106527] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106528] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106530] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106531] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106533] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106534] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106536] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106538] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106539] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106540] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106542] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106543] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106545] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106547] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106548] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.106549] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.106551] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.106553] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.107292] ACPI: 14 ACPI AML tables successfully acquired and loaded
[    0.111970] ACPI: Dynamic OEM Table Load:
[    0.111970] ACPI: SSDT 0xFFFF938A8133B000 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.112853] ACPI: Dynamic OEM Table Load:
[    0.112858] ACPI: SSDT 0xFFFF938A81336800 0005C3 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.113471] ACPI: Dynamic OEM Table Load:
[    0.113475] ACPI: SSDT 0xFFFF938A80B69C00 0001C6 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.114034] ACPI: Dynamic OEM Table Load:
[    0.114038] ACPI: SSDT 0xFFFF938A8133B400 00028B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.114705] ACPI: Dynamic OEM Table Load:
[    0.114710] ACPI: SSDT 0xFFFF938A8019E000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.115373] ACPI: Dynamic OEM Table Load:
[    0.115377] ACPI: SSDT 0xFFFF938A81332000 00048A (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.115999] ACPI: Dynamic OEM Table Load:
[    0.116003] ACPI: SSDT 0xFFFF938A81337000 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.116623] ACPI: Dynamic OEM Table Load:
[    0.116627] ACPI: SSDT 0xFFFF938A81D08800 00048A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.120025] ACPI: EC: EC started
[    0.120026] ACPI: EC: interrupt blocked
[    0.120614] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.120616] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.120617] ACPI: Interpreter enabled
[    0.120647] ACPI: PM: (supports S0 S3 S4 S5)
[    0.120647] ACPI: Using IOAPIC for interrupt routing
[    0.120673] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.120674] PCI: Using E820 reservations for host bridge windows
[    0.122177] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.122664] ACPI: \_SB_.PC00.PEG0.PCRP: New power resource
[    0.122683] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.DGPV], AE_NOT_FOUND (20240827/psargs-332)
[    0.122686] ACPI Error: Aborting method \_SB.PC00.PEG0.PCRP._ON due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[    0.130420] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
[    0.130489] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
[    0.130552] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
[    0.134865] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.139524] ACPI: \_SB_.PC00.VMD0.VOL0.V0PR: New power resource
[    0.139561] ACPI: \_SB_.PC00.VMD0.VOL1.V1PR: New power resource
[    0.139595] ACPI: \_SB_.PC00.VMD0.VOL2.V2PR: New power resource
[    0.139627] ACPI: \_SB_.PC00.VMD0.VOL3.V3PR: New power resource
[    0.141453] ACPI: \_TZ_.FN00: New power resource
[    0.141489] ACPI: \_TZ_.FN01: New power resource
[    0.141523] ACPI: \_TZ_.FN02: New power resource
[    0.141557] ACPI: \_TZ_.FN03: New power resource
[    0.141592] ACPI: \_TZ_.FN04: New power resource
[    0.141957] ACPI: \PIN_: New power resource
[    0.142330] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.142334] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.144513] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR DPC]
[    0.146733] PCI host bridge to bus 0000:00
[    0.146735] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.146737] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.146738] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.146739] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xbfffffff window]
[    0.146740] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.146741] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.146813] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 conventional PCI endpoint
[    0.146929] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.146937] pci 0000:00:02.0: BAR 0 [mem 0x6002000000-0x6002ffffff 64bit]
[    0.146943] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.146946] pci 0000:00:02.0: BAR 4 [io  0x4000-0x403f]
[    0.146961] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.146963] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.146989] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit]
[    0.146990] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit]: contains BAR 0 for 7 VFs
[    0.146994] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0x1fffffff 64bit pref]
[    0.146995] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs
[    0.147120] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000 conventional PCI endpoint
[    0.147129] pci 0000:00:08.0: BAR 0 [mem 0x600340f000-0x600340ffff 64bit]
[    0.147236] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400 PCIe Root Complex Integrated Endpoint
[    0.147249] pci 0000:00:0e.0: BAR 0 [mem 0x6000000000-0x6001ffffff 64bit]
[    0.147255] pci 0000:00:0e.0: BAR 2 [mem 0x50000000-0x51ffffff]
[    0.147269] pci 0000:00:0e.0: BAR 4 [mem 0x6003300000-0x60033fffff 64bit]
[    0.147482] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 conventional PCI endpoint
[    0.147503] pci 0000:00:14.0: BAR 0 [mem 0x52100000-0x5210ffff 64bit]
[    0.147590] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.147866] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 conventional PCI endpoint
[    0.147889] pci 0000:00:14.2: BAR 0 [mem 0x6003404000-0x6003407fff 64bit]
[    0.147904] pci 0000:00:14.2: BAR 2 [mem 0x600340e000-0x600340efff 64bit]
[    0.148113] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 conventional PCI endpoint
[    0.148143] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.148439] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000 conventional PCI endpoint
[    0.148467] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.148865] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 conventional PCI endpoint
[    0.148888] pci 0000:00:16.0: BAR 0 [mem 0x600340b000-0x600340bfff 64bit]
[    0.148973] pci 0000:00:16.0: PME# supported from D3hot
[    0.149227] pci 0000:00:17.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint
[    0.149552] pci 0000:00:19.0: [8086:a0c5] type 00 class 0x0c8000 conventional PCI endpoint
[    0.149582] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.149907] pci 0000:00:19.1: [8086:a0c6] type 00 class 0x0c8000 conventional PCI endpoint
[    0.149940] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.150262] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400 PCIe Root Port
[    0.150289] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.150294] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.150297] pci 0000:00:1d.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.150379] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.150416] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.150794] pci 0000:00:1d.1: [8086:a0b1] type 01 class 0x060400 PCIe Root Port
[    0.150821] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.150836] pci 0000:00:1d.1:   bridge window [mem 0x6003000000-0x60031fffff 64bit pref]
[    0.150909] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.150945] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
[    0.151325] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 conventional PCI endpoint
[    0.151598] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100 conventional PCI endpoint
[    0.151640] pci 0000:00:1f.3: BAR 0 [mem 0x6003400000-0x6003403fff 64bit]
[    0.151694] pci 0000:00:1f.3: BAR 4 [mem 0x6003200000-0x60032fffff 64bit]
[    0.151799] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.152079] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 conventional PCI endpoint
[    0.152103] pci 0000:00:1f.4: BAR 0 [mem 0x6003408000-0x60034080ff 64bit]
[    0.152132] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.152305] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 conventional PCI endpoint
[    0.152323] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.152495] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.152518] pci 0000:01:00.0: BAR 0 [io  0x3000-0x30ff]
[    0.152548] pci 0000:01:00.0: BAR 2 [mem 0x52004000-0x52004fff 64bit]
[    0.152568] pci 0000:01:00.0: BAR 4 [mem 0x52000000-0x52003fff 64bit]
[    0.152694] pci 0000:01:00.0: supports D1 D2
[    0.152695] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152941] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.153042] pci 0000:02:00.0: [14c3:7961] type 00 class 0x028000 PCIe Endpoint
[    0.153101] pci 0000:02:00.0: BAR 0 [mem 0x6003000000-0x60030fffff 64bit pref]
[    0.153136] pci 0000:02:00.0: BAR 2 [mem 0x6003100000-0x6003103fff 64bit pref]
[    0.153172] pci 0000:02:00.0: BAR 4 [mem 0x6003104000-0x6003104fff 64bit pref]
[    0.153422] pci 0000:02:00.0: supports D1 D2
[    0.153423] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.153894] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.161534] Low-power S0 idle used by default for system suspend
[    0.165494] ACPI: EC: interrupt unblocked
[    0.165496] ACPI: EC: event unblocked
[    0.165514] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.165515] ACPI: EC: GPE=0x6e
[    0.165516] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.165517] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    0.165604] iommu: Default domain type: Translated
[    0.165604] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.165608] ACPI: bus type USB registered
[    0.165617] usbcore: registered new interface driver usbfs
[    0.165621] usbcore: registered new interface driver hub
[    0.165624] usbcore: registered new device driver usb
[    0.165637] pps_core: LinuxPPS API ver. 1 registered
[    0.165638] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.165639] PTP clock support registered
[    0.165649] efivars: Registered efivars operations
[    0.165712] NetLabel: Initializing
[    0.165713] NetLabel:  domain hash size = 128
[    0.165714] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.165725] NetLabel:  unlabeled traffic allowed by default
[    0.165728] PCI: Using ACPI for IRQ routing
[    0.186292] PCI: pci_cache_line_size set to 64 bytes
[    0.186425] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
[    0.186547] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.186548] e820: reserve RAM buffer [mem 0x3bf93000-0x3bffffff]
[    0.186549] e820: reserve RAM buffer [mem 0x3bf95000-0x3bffffff]
[    0.186550] e820: reserve RAM buffer [mem 0x3fd99000-0x3fffffff]
[    0.186551] e820: reserve RAM buffer [mem 0x424af000-0x43ffffff]
[    0.186551] e820: reserve RAM buffer [mem 0x44c00000-0x47ffffff]
[    0.186553] e820: reserve RAM buffer [mem 0x2b0800000-0x2b3ffffff]
[    0.186602] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.186602] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.186602] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.186602] vgaarb: loaded
[    0.186607] clocksource: Switched to clocksource tsc-early
[    0.186689] VFS: Disk quotas dquot_6.6.0
[    0.186695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186714] pnp: PnP ACPI init
[    0.186825] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.186827] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.186828] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.187286] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.187301] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.187302] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.187303] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.187305] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.187306] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.187307] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.187308] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.187681] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.187682] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.187684] system 00:04: [mem 0xfe04c000-0xfe04ffff] has been reserved
[    0.187685] system 00:04: [mem 0xfe050000-0xfe0affff] has been reserved
[    0.187686] system 00:04: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[    0.187687] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.187688] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.187688] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.187690] system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.187690] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.187845] system 00:05: [io  0x2000-0x20fe] has been reserved
[    0.188039] pnp: PnP ACPI: found 7 devices
[    0.193309] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.193344] NET: Registered PF_INET protocol family
[    0.193415] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.201980] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.201993] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.202011] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.202170] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.202325] TCP: Hash tables configured (established 65536 bind 65536)
[    0.202363] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)
[    0.202382] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.202397] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.202424] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.202429] NET: Registered PF_XDP protocol family
[    0.202434] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[    0.202442] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned
[    0.202445] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: assigned
[    0.202447] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-0x4017000fff 64bit]: assigned
[    0.202510] pci 0000:00:15.3: BAR 0 [mem 0x4017001000-0x4017001fff 64bit]: assigned
[    0.202526] pci 0000:00:19.0: BAR 0 [mem 0x4017002000-0x4017002fff 64bit]: assigned
[    0.202540] pci 0000:00:19.1: BAR 0 [mem 0x4017003000-0x4017003fff 64bit]: assigned
[    0.202644] resource: avoiding allocation from e820 entry [mem 0x0009f000-0x000fffff]
[    0.202646] pci 0000:00:1f.5: BAR 0 [mem 0x4f800000-0x4f800fff]: assigned
[    0.202658] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.202660] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.202664] pci 0000:00:1d.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.202671] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.202677] pci 0000:00:1d.1:   bridge window [mem 0x6003000000-0x60031fffff 64bit pref]
[    0.202682] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.202683] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.202684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.202685] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xbfffffff window]
[    0.202686] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.202687] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.202687] pci_bus 0000:01: resource 1 [mem 0x52000000-0x520fffff]
[    0.202688] pci_bus 0000:02: resource 2 [mem 0x6003000000-0x60031fffff 64bit pref]
[    0.204765] PCI: CLS 64 bytes, default 64
[    0.204800] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.204801] software IO TLB: mapped [mem 0x00000000343bf000-0x00000000383bf000] (64MB)
[    0.204841] Trying to unpack rootfs image as initramfs...
[    0.208734] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    0.208735] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.208736] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.208737] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.208858] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
[    0.208861] caller uncore_get_box_mmio_addr+0xea/0x190 mapping multiple BARs
[    0.208912] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
[    0.209066] clocksource: Switched to clocksource tsc
[    0.209378] Initialise system trusted keyrings
[    0.209442] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.209446] zbud: loaded
[    0.209539] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.216749] Key type asymmetric registered
[    0.216751] Asymmetric key parser 'x509' registered
[    0.216766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.216825] io scheduler mq-deadline registered
[    0.216829] io scheduler bfq registered
[    0.217085] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.217086] crc32: self tests passed, processed 225944 bytes in 116239 nsec
[    0.217204] crc32c: CRC_LE_BITS = 64
[    0.217204] crc32c: self tests passed, processed 112972 bytes in 58156 nsec
[    0.226291] crc32_combine: 8373 self tests passed
[    0.235371] crc32c_combine: 8373 self tests passed
[    0.235629] ledtrig-cpu: registered to indicate activity on CPUs
[    0.235801] pcieport 0000:00:1d.0: PME: Signaling with IRQ 120
[    0.235892] pcieport 0000:00:1d.0: AER: enabled with IRQ 120
[    0.235919] pcieport 0000:00:1d.0: DPC: enabled with IRQ 120
[    0.235920] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.236103] pcieport 0000:00:1d.1: PME: Signaling with IRQ 121
[    0.236139] pcieport 0000:00:1d.1: AER: enabled with IRQ 121
[    0.236166] pcieport 0000:00:1d.1: DPC: enabled with IRQ 121
[    0.236167] pcieport 0000:00:1d.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.236368] Monitor-Mwait will be used to enter C-1 state
[    0.236371] Monitor-Mwait will be used to enter C-2 state
[    0.236373] Monitor-Mwait will be used to enter C-3 state
[    0.238038] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[    0.238489] hpet_acpi_add: no address or irqs in _CRS
[    0.238511] Linux agpgart interface v0.103
[    0.243635] tpm tpm0: tpm_read_log_acpi: Failed to map ACPI memory
[    0.244076] ACPI: bus type drm_connector registered
[    0.245904] brd: module loaded
[    0.246300] loop: module loaded
[    0.246411] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.246413] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.246946] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.247026] mousedev: PS/2 mouse device common for all mice
[    0.247037] rtc_cmos 00:01: RTC can wake from S4
[    0.247990] rtc_cmos 00:01: registered as rtc0
[    0.248170] rtc_cmos 00:01: setting system clock to 2026-04-09T06:26:47 UTC (1775716007)
[    0.248195] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.248448] intel_pstate: Intel P-state driver initializing
[    0.248889] intel_pstate: HWP enabled
[    0.248972] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[    0.248973] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[    0.250178] fbcon: Deferring console take-over
[    0.250180] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.250289] NET: Registered PF_INET6 protocol family
[    0.250496] Segment Routing with IPv6
[    0.250497] RPL Segment Routing with IPv6
[    0.250502] In-situ OAM (IOAM) with IPv6
[    0.251012] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.251132] microcode: Current revision: 0x000000bc
[    0.251133] microcode: Updated early from: 0x0000008a
[    0.251450] resctrl: L2 allocation detected
[    0.251460] IPI shorthand broadcast: enabled
[    0.252208] sched_clock: Marking stable (245001166, 6544425)->(294871897, -43326306)
[    0.252304] registered taskstats version 1
[    0.252361] Loading compiled-in X.509 certificates
[    0.252790] Loaded X.509 cert 'Build time autogenerated kernel key: f6ddfc5f51bb6c48e7443c0776dfdd2e4ac165d7'
[    0.253821] Demotion targets for Node 0: null
[    0.253850] Key type .fscrypt registered
[    0.253851] Key type fscrypt-provisioning registered
[    0.255819] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.369132] Freeing initrd memory: 27096K
[    0.376800] Key type encrypted registered
[    0.376807] ima: Allocated hash algorithm: sha512
[    0.409608] ima: No architecture policies found
[    0.409618] evm: Initialising EVM extended attributes:
[    0.409618] evm: security.selinux
[    0.409619] evm: security.SMACK64
[    0.409619] evm: security.SMACK64EXEC
[    0.409620] evm: security.SMACK64TRANSMUTE
[    0.409620] evm: security.SMACK64MMAP
[    0.409621] evm: security.apparmor
[    0.409621] evm: security.ima
[    0.409621] evm: security.capability
[    0.409622] evm: HMAC attrs: 0x1
[    0.417056] clk: Disabling unused clocks
[    0.417060] PM: genpd: Disabling unused power domains
[    0.432797] Freeing unused decrypted memory: 2028K
[    0.433285] Freeing unused kernel image (initmem) memory: 4276K
[    0.433300] Write protecting the kernel read-only data: 30720k
[    0.441418] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.441421] rodata_test: all tests were successful
[    0.441424] Run /init as init process
[    0.441425]   with arguments:
[    0.441425]     /init
[    0.441426]     splash
[    0.441426]   with environment:
[    0.441427]     HOME=/
[    0.441427]     TERM=linux
[    0.659339] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WMBF method block execution control method not found
[    0.670699] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.670704] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.670706] pci_bus 10000:e0: root bus resource [mem 0x50000000-0x51ffffff]
[    0.670707] pci_bus 10000:e0: root bus resource [mem 0x6003302000-0x60033fffff 64bit]
[    0.670737] pci 10000:e0:17.0: [8086:a0d3] type 00 class 0x010601 conventional PCI endpoint
[    0.670758] pci 10000:e0:17.0: BAR 0 [mem 0x00000000-0x00001fff]
[    0.670769] pci 10000:e0:17.0: BAR 1 [mem 0x00000000-0x000000ff]
[    0.670781] pci 10000:e0:17.0: BAR 2 [io  0x0000-0x0007]
[    0.670792] pci 10000:e0:17.0: BAR 3 [io  0x0000-0x0003]
[    0.670803] pci 10000:e0:17.0: BAR 4 [io  0x0000-0x001f]
[    0.670815] pci 10000:e0:17.0: BAR 5 [mem 0x50000000-0x500007ff]
[    0.670860] pci 10000:e0:17.0: PME# supported from D3hot
[    0.670936] pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint
[    0.671045] pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400 PCIe Root Port
[    0.671080] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.671089] pci 10000:e0:1c.4:   bridge window [io  0x0000-0x0fff]
[    0.671092] pci 10000:e0:1c.4:   bridge window [mem 0x50100000-0x501fffff]
[    0.671174] pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
[    0.671219] pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
[    0.673154] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.673217] pci 10000:e1:00.0: [144d:a809] type 00 class 0x010802 PCIe Endpoint
[    0.673250] pci 10000:e1:00.0: BAR 0 [mem 0x50100000-0x50103fff 64bit]
[    0.677249] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.677267] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.847780] pci 10000:e0:1c.4: bridge window [mem 0x50000000-0x500fffff]: assigned
[    0.847784] pci 10000:e0:17.0: BAR 0 [mem 0x50100000-0x50101fff]: assigned
[    0.847793] pci 10000:e0:1c.4: bridge window [io  size 0x1000]: can't assign; no space
[    0.847794] pci 10000:e0:1c.4: bridge window [io  size 0x1000]: failed to assign
[    0.847795] pci 10000:e0:17.0: BAR 5 [mem 0x50102000-0x501027ff]: assigned
[    0.847799] pci 10000:e0:17.0: BAR 1 [mem 0x50102800-0x501028ff]: assigned
[    0.847803] pci 10000:e0:17.0: BAR 4 [io  size 0x0020]: can't assign; no space
[    0.847804] pci 10000:e0:17.0: BAR 4 [io  size 0x0020]: failed to assign
[    0.847804] pci 10000:e0:17.0: BAR 2 [io  size 0x0008]: can't assign; no space
[    0.847805] pci 10000:e0:17.0: BAR 2 [io  size 0x0008]: failed to assign
[    0.847806] pci 10000:e0:17.0: BAR 3 [io  size 0x0004]: can't assign; no space
[    0.847807] pci 10000:e0:17.0: BAR 3 [io  size 0x0004]: failed to assign
[    0.847808] pci 10000:e1:00.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    0.847822] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.847827] pci 10000:e0:1c.4:   bridge window [mem 0x50000000-0x500fffff]
[    0.847855] pci 10000:e1:00.0: VMD: Default LTR value set by driver
[    0.847919] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.847920] pcieport 10000:e0:1c.4: PCI INT A: no GSI
[    0.847999] pcieport 10000:e0:1c.4: PME: Signaling with IRQ 141
[    0.848197] pcieport 10000:e0:1c.4: AER: enabled with IRQ 141
[    0.848233] pcieport 10000:e0:1c.4: DPC: enabled with IRQ 141
[    0.848234] pcieport 10000:e0:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.848316] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    1.001571] i915 0000:00:02.0: [drm] Found TIGERLAKE/UY (device ID 9a49) display version 12.00 stepping C0
[    1.007011] nvme nvme0: pci function 10000:e1:00.0
[    1.007019] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    1.007020] nvme 10000:e1:00.0: PCI INT A: not connected
[    1.010461] nvme nvme0: D3 entry latency set to 8 seconds
[    1.035006] nvme nvme0: allocated 64 MiB host memory buffer.
[    1.035317] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.035422] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    1.037518] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.041296] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[    1.098764] nvme nvme0: 8/0/0 default/read/poll queues
[    1.119569]  nvme0n1: p1 p2 p3
[    2.189874] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
[    2.191910] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.192333] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[    2.198716] fbcon: i915drmfb (fb0) is primary device
[    2.198720] fbcon: Deferring console take-over
[    2.198724] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    2.783924] PM: Image not found (code -22)
[    2.868142] EXT4-fs (nvme0n1p3): orphan cleanup on readonly fs
[    2.868394] EXT4-fs (nvme0n1p3): mounted filesystem 9e382646-bf7e-43b5-925d-45491d8567c0 ro with ordered data mode. Quota mode: none.
[    3.070166] systemd[1]: Inserted module 'autofs4'
[    3.123384] systemd[1]: systemd 257.9-alt1 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
[    3.123388] systemd[1]: Detected architecture x86-64.
[    3.125124] systemd[1]: Hostname set to <intel-3c9a49>.
[    3.257269] systemd-sysv-generator[619]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[    3.257272] systemd-sysv-generator[619]: Please update package to include a native systemd unit file.
[    3.257274] systemd-sysv-generator[619]: ! This compatibility logic is deprecated, expect removal soon. !
[    3.277945] systemd[1]: /usr/lib/systemd/system/auditd.service:33: PIDFile= references a path below legacy directory /var/run/, updating /var/run/audit/auditd.pid → /run/audit/auditd.pid; please update the unit file accordingly.
[    3.297988] systemd[1]: /usr/lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly.
[    3.300195] systemd[1]: /usr/lib/systemd/system/anacron.service:12: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.300198] systemd[1]: /usr/lib/systemd/system/anacron.service:13: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.328983] systemd[1]: Queued start job for default target graphical.target.
[    3.349261] systemd[1]: Created slice system-cups.slice - CUPS Slice.
[    3.349815] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    3.350264] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    3.350705] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    3.351077] systemd[1]: Created slice system-vconsole\x2dsetup\x2dkludge.slice - Slice /system/vconsole-setup-kludge.
[    3.351345] systemd[1]: Created slice user.slice - User and Session Slice.
[    3.351535] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    3.351617] systemd[1]: Expecting device dev-disk-by\x2duuid-7C71\x2d073E.device - /dev/disk/by-uuid/7C71-073E...
[    3.351644] systemd[1]: Expecting device dev-disk-by\x2duuid-8b5c23a1\x2db01f\x2d42b5\x2d8056\x2d47610b5296f0.device - /dev/disk/by-uuid/8b5c23a1-b01f-42b5-8056-47610b5296f0...
[    3.351676] systemd[1]: Reached target getty.target - Login Prompts.
[    3.351707] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    3.351745] systemd[1]: Reached target network-pre.target - Preparation for Network.
[    3.351777] systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
[    3.351809] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    3.351839] systemd[1]: Reached target slices.target - Slice Units.
[    3.351879] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    3.351980] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[    3.352065] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[    3.352099] systemd[1]: Reached target rpcbind.target - RPC Port Mapper.
[    3.355629] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[    3.356363] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[    3.356441] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    3.356718] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    3.356810] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    3.356891] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[    3.356932] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.356943] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.356995] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    3.357051] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    3.357111] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
[    3.357949] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    3.358542] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    3.359127] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    3.359668] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    3.360593] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    3.361269] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.361920] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    3.362505] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    3.363083] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    3.364122] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    3.365736] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    3.366468] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    3.367363] pstore: Using crash dump compression: deflate
[    3.367606] systemd[1]: Starting rpcbind.service - RPC Bind...
[    3.368119] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
[    3.368169] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    3.369181] (rpcbind)[638]: rpcbind.service: Referenced but unset environment variable evaluates to an empty string: RPCBIND_ARGS
[    3.369651] systemd[1]: Starting systemd-journald.service - Journal Service...
[    3.372420] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    3.372460] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.372521] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.372730] VFS: idmapped mount is not enabled.
[    3.373125] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[    3.373799] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    3.373827] device-mapper: uevent: version 1.0.3
[    3.373905] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    3.374495] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    3.376063] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[    3.376772] systemd[1]: Starting vconsole-setup-kludge@tty1.service - Setup Virtual Console on tty1...
[    3.378436] fuse: init (API version 7.41)
[    3.378847] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    3.378962] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    3.379030] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    3.379078] i2c_dev: i2c /dev entries driver
[    3.379088] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    3.379394] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    3.379763] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.379897] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    3.380120] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    3.380256] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    3.380470] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.380610] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    3.380813] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.380934] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    3.381137] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    3.381261] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    3.381428] systemd[1]: Started rpcbind.service - RPC Bind.
[    3.381694] systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
[    3.382499] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    3.383010] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    3.383069] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    3.383643] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[    3.383978] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[    3.385022] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    3.385742] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    3.386949] systemd[1]: Finished systemd-fsck-root.service - File System Check on Root Device.
[    3.387537] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    3.388125] systemd-journald[640]: Collecting audit messages is enabled.
[    3.391710] pstore: Registered efi_pstore as persistent store backend
[    3.392213] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    3.392361] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    3.406788] systemd[1]: Finished vconsole-setup-kludge@tty1.service - Setup Virtual Console on tty1.
[    3.407039] Asymmetric key parser 'pkcs8' registered
[    3.407061] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    3.407070] EXT4-fs (nvme0n1p3): re-mounted 9e382646-bf7e-43b5-925d-45491d8567c0 r/w.
[    3.407808] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    3.408063] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    3.408096] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    3.409203] vboxdrv: loading out-of-tree module taints kernel.
[    3.409207] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.416720] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[    3.416751] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.416843] systemd[1]: Started systemd-journald.service - Journal Service.
[    3.417464] vboxdrv: Found 8 processor cores/threads
[    3.427278] systemd-journald[640]: Received client request to flush runtime journal.
[    3.433679] vboxdrv: TSC mode is Invariant, tentative frequency 2419201049 Hz
[    3.433682] vboxdrv: Successfully loaded version 7.2.4 r170995 (interface 0x00340001)
[    3.434907] VBoxNetFlt: Successfully started.
[    3.435783] VBoxNetAdp: Successfully started.
[    3.519180] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/10251229:00/input/input2
[    3.551193] intel_pmc_core INT33A1:00:  initialized
[    3.554575] input: Intel HID events as /devices/platform/INTC1051:00/input/input3
[    3.555817] intel-hid INTC1051:00: platform supports 5 button array
[    3.556613] input: Intel HID 5 button array as /devices/platform/INTC1051:00/input/input4
[    3.563441] Adding 7907324k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:7907324k SS
[    3.567512] ACPI: battery: Slot [BAT1] (battery present)
[    3.567551] ACPI: AC: AC Adapter [ACAD] (on-line)
[    3.567848] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/PNP0C0D:00/input/input5
[    3.576976] ACPI: button: Lid Switch [LID0]
[    3.577862] hid: raw HID events driver (C) Jiri Kosina
[    3.582482] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    3.585845] EDAC MC: Ver: 3.0.0
[    3.586048] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[    3.591055] ACPI: button: Sleep Button [SLPB]
[    3.591667] EDAC DEBUG: igen6_init: 
[    3.592677] EDAC DEBUG: igen6_probe: 
[    3.592679] EDAC DEBUG: igen6_pci_setup: 
[    3.592681] EDAC DEBUG: igen6_pci_setup: No In-Band ECC IP
[    3.595508] EDAC igen6: v2.5.1
[    3.595807] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[    3.596463] SCSI subsystem initialized
[    3.602566] ACPI: button: Power Button [PWRB]
[    3.612783] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.618420] libata version 3.00 loaded.
[    3.619976] thermal LNXTHERM:00: registered as thermal_zone0
[    3.619979] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    3.625714] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    3.628580] cryptd: max_cpu_qlen set to 1000
[    3.629559] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    3.629844] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.645582] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[    3.647757] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.653347] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.653354] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.654469] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[    3.656878] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.656883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.656886] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.656929] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    3.656931] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.656933] usb usb1: Product: xHCI Host Controller
[    3.656935] usb usb1: Manufacturer: Linux 6.12.61-6.12-alt1 xhci-hcd
[    3.656936] usb usb1: SerialNumber: 0000:00:14.0
[    3.657373] hub 1-0:1.0: USB hub found
[    3.657398] hub 1-0:1.0: 12 ports detected
[    3.658186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    3.658189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.658191] usb usb2: Product: xHCI Host Controller
[    3.658192] usb usb2: Manufacturer: Linux 6.12.61-6.12-alt1 xhci-hcd
[    3.658194] usb usb2: SerialNumber: 0000:00:14.0
[    3.658281] hub 2-0:1.0: USB hub found
[    3.658297] hub 2-0:1.0: 4 ports detected
[    3.661537] AES CTR mode by8 optimization enabled
[    3.667685] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[    3.667994] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    3.671414] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 08:8f:c3:3c:9a:49, XID 541, IRQ 162
[    3.671419] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    3.686562] intel-lpss 0000:00:19.1: enabling device (0004 -> 0006)
[    3.687019] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    3.707790] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.707970] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.708099] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    3.708104] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[    3.739725] acer_wmi: Acer Laptop ACPI-WMI Extras
[    3.739761] acer_wmi: Function bitmap for Communication Button: 0x801
[    3.745969] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.746011] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.747173] ahci 10000:e0:17.0: version 3.0
[    3.747184] ahci 10000:e0:17.0: can't derive routing for PCI INT A
[    3.747186] ahci 10000:e0:17.0: PCI INT A: no GSI
[    3.749739] ahci 10000:e0:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    3.749744] ahci 10000:e0:17.0: 2/2 ports implemented (port mask 0x3)
[    3.749745] ahci 10000:e0:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
[    3.750605] input: Acer WMI hotkeys as /devices/virtual/input/input9
[    3.750812] i2c i2c-14: Successfully instantiated SPD at 0x50
[    3.751600] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    3.770142] iTCO_vendor_support: vendor-support=0
[    3.771438] scsi host0: ahci
[    3.775748] scsi host1: ahci
[    3.775814] ata1: SATA max UDMA/133 abar m2048@0x50102000 port 0x50102100 irq 163 lpm-pol 0
[    3.775818] ata2: SATA max UDMA/133 abar m2048@0x50102000 port 0x50102180 irq 163 lpm-pol 0
[    3.778165] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    3.778623] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    3.778817] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.781161] ee1004 14-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    3.808917] input: ELAN050A:01 04F3:3158 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-11/i2c-ELAN050A:01/0018:04F3:3158.0001/input/input10
[    3.808971] input: ELAN050A:01 04F3:3158 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-11/i2c-ELAN050A:01/0018:04F3:3158.0001/input/input12
[    3.809015] hid-generic 0018:04F3:3158.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN050A:01 04F3:3158] on i2c-ELAN050A:01
[    3.896688] usb 1-4: new low-speed USB device number 2 using xhci_hcd
[    4.023955] usb 1-4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    4.023964] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.023967] usb 1-4: Product: USB Optical Mouse
[    4.023970] usb 1-4: Manufacturer: Logitech
[    4.086736] ata2: SATA link down (SStatus 0 SControl 300)
[    4.086793] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.119455] ata1.00: ATA-10: ST1000LM035-1RK172, ADM1, max UDMA/133
[    4.137749] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[    4.271978] usb 1-8: New USB device found, idVendor=0408, idProduct=a061, bcdDevice= 0.04
[    4.271987] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.271991] usb 1-8: Product: HD User Facing
[    4.271994] usb 1-8: Manufacturer: SunplusIT Inc
[    4.386777] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[    4.504508] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.512677] usb 1-10: New USB device found, idVendor=04ca, idProduct=3802, bcdDevice= 1.00
[    4.512688] usb 1-10: New USB device strings: Mfr=5, Product=6, SerialNumber=7
[    4.512691] usb 1-10: Product: Wireless_Device
[    4.512694] usb 1-10: Manufacturer: MediaTek Inc.
[    4.512697] usb 1-10: SerialNumber: 000000000
[    4.536796] mc: Linux media interface: v0.10
[    4.537005] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C077.0002/input/input13
[    4.537101] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0
[    4.537127] usbcore: registered new interface driver usbhid
[    4.537129] usbhid: USB HID core driver
[    4.553242] ata1.00: configured for UDMA/133
[    4.553473] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 ADM1 PQ: 0 ANSI: 5
[    4.566149] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    4.600244] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.600250] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.600261] sd 0:0:0:0: [sda] Write Protect is off
[    4.600265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.600282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.600313] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    4.602192] videodev: Linux video capture interface: v2.00
[    4.618982] Bluetooth: Core ver 2.22
[    4.618994] NET: Registered PF_BLUETOOTH protocol family
[    4.618995] Bluetooth: HCI device and connection manager initialized
[    4.618999] Bluetooth: HCI socket layer initialized
[    4.619000] Bluetooth: L2CAP socket layer initialized
[    4.619003] Bluetooth: SCO socket layer initialized
[    4.677240] input: ELAN050A:01 04F3:3158 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-11/i2c-ELAN050A:01/0018:04F3:3158.0001/input/input14
[    4.677406] input: ELAN050A:01 04F3:3158 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-11/i2c-ELAN050A:01/0018:04F3:3158.0001/input/input16
[    4.677461] hid-multitouch 0018:04F3:3158.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN050A:01 04F3:3158] on i2c-ELAN050A:01
[    4.737267]  sda:
[    4.737317] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.746543] mt7921e 0000:02:00.0: enabling device (0000 -> 0002)
[    4.773623] usb 1-8: Found UVC 1.00 device HD User Facing (0408:a061)
[    4.788643] usbcore: registered new interface driver btusb
[    4.795721] usbcore: registered new interface driver uvcvideo
[    4.822619] mt7921e 0000:02:00.0: ASIC revision: 79610010
[    4.827351] intel_tcc_cooling: TCC Offset locked
[    4.837257] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20250625154126
[    4.848686] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.848804] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    4.848850] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.855349] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[    4.870262] intel_rapl_msr: PL4 support detected.
[    4.870285] intel_rapl_common: Found RAPL domain package
[    4.870287] intel_rapl_common: Found RAPL domain core
[    4.870288] intel_rapl_common: Found RAPL domain uncore
[    4.874790] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[    4.874794] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[    4.874795] sof-audio-pci-intel-tgl 0000:00:1f.3: NHLT device BT(0) detected, ssp_mask 0x4
[    4.874797] sof-audio-pci-intel-tgl 0000:00:1f.3: BT link detected in NHLT tables: 0x4
[    4.874798] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[    4.877942] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware paths/files for ipc type 0:
[    4.877945] sof-audio-pci-intel-tgl 0000:00:1f.3:  Firmware file:     intel/sof/sof-tgl.ri
[    4.877946] sof-audio-pci-intel-tgl 0000:00:1f.3:  Topology file:     intel/sof-tplg/sof-hda-generic-2ch.tplg
[    4.878339] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[    4.878340] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[    4.878342] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30
[    4.901241] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[    4.951964] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[    4.980713] Bluetooth: hci0: Device setup in 184039 usecs
[    4.980719] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[    4.986413] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[    4.986418] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[    4.994596] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:1
[    4.994915] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    5.031538] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.031543] snd_hda_codec_realtek ehdaudio0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.031544] snd_hda_codec_realtek ehdaudio0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.031550] snd_hda_codec_realtek ehdaudio0D0:    mono: mono_out=0x0
[    5.031552] snd_hda_codec_realtek ehdaudio0D0:    inputs:
[    5.063432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.063435] Bluetooth: BNEP filters: protocol multicast
[    5.063438] Bluetooth: BNEP socket layer initialized
[    5.064410] Bluetooth: MGMT ver 1.23
[    5.066834] NET: Registered PF_ALG protocol family
[    5.070138] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[    5.087346] input: sof-hda-dsp Front Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input17
[    5.087389] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input18
[    5.087414] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input19
[    5.087444] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input20
[    5.122319] NET: Registered PF_QIPCRTR protocol family
[    5.172593] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[    5.342924] r8169 0000:01:00.0 enp1s0: Link is Down
[    5.806380] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[    6.404062] NET: Registered PF_PACKET protocol family
[    6.695913] Bluetooth: RFCOMM TTY layer initialized
[    6.695919] Bluetooth: RFCOMM socket layer initialized
[    6.695922] Bluetooth: RFCOMM ver 1.11
[    8.614432] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[    8.730132] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[   10.788134] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[   10.922491] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[   10.922507] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[   11.029515] wlp2s0: authenticated
[   11.031641] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[   11.081485] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[   11.096600] wlp2s0: associated
[   12.860264] nvme nvme0: using unchecked data buffer
[   13.347839] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   47.907718] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[   50.112451] mt7921e 0000:02:00.0: ASIC revision: 79610010
[   50.198522] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[   50.235665] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[   51.084134] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[   56.150840] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[   56.649149] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[   56.665435] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[   56.665449] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[   56.678116] wlp2s0: authenticated
[   56.679263] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 1/3)
[   56.696682] wlp2s0: RX AssocResp from a8:29:48:c2:d4:b1 (capab=0x1511 status=0 aid=13)
[   56.704732] wlp2s0: associated
[   56.904848] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a8:29:48:c2:d4:b1
[   60.706359] wlp2s0: deauthenticated from a8:29:48:c2:d4:b1 (Reason: 2=PREV_AUTH_NOT_VALID)
[   69.527028] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[   69.535749] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[   69.555917] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[   69.555932] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[   69.566681] wlp2s0: authenticated
[   69.567195] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 1/3)
[   69.584917] wlp2s0: RX AssocResp from a8:29:48:c2:d4:b1 (capab=0x1511 status=0 aid=13)
[   69.593428] wlp2s0: associated
[   69.810546] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a8:29:48:c2:d4:b1
[   88.387138] wlp2s0: disconnect from AP a8:29:48:c2:d4:b1 for new auth to 34:60:f9:99:08:39
[   88.470578] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[   88.612956] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[   90.619379] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[   90.750676] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[   90.750689] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[   90.865933] wlp2s0: authenticated
[   90.866822] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[   90.909740] wlp2s0: RX ReassocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[   90.920084] wlp2s0: associated
[  128.593690] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  130.616604] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  130.700883] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  130.738949] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  131.589315] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  142.615428] wlp2s0: authenticate with 34:60:f9:dc:c7:b7 (local address=14:5a:fc:77:82:1f)
[  142.750855] wlp2s0: send auth to 34:60:f9:dc:c7:b7 (try 1/3)
[  144.760102] wlp2s0: send auth to 34:60:f9:dc:c7:b7 (try 2/3)
[  144.891433] wlp2s0: authenticate with 34:60:f9:dc:c7:b7 (local address=14:5a:fc:77:82:1f)
[  144.891467] wlp2s0: send auth to 34:60:f9:dc:c7:b7 (try 1/3)
[  145.007675] wlp2s0: authenticated
[  145.008542] wlp2s0: associate with 34:60:f9:dc:c7:b7 (try 1/3)
[  145.055261] wlp2s0: RX AssocResp from 34:60:f9:dc:c7:b7 (capab=0x1931 status=0 aid=34)
[  145.064545] wlp2s0: associated
[  148.176750] wlp2s0: deauthenticated from 34:60:f9:dc:c7:b7 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[  150.828467] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  150.836895] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  150.962415] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  150.962448] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  151.069739] wlp2s0: authenticated
[  151.070464] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  151.117307] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  151.126795] wlp2s0: associated
[  157.757489] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  158.290500] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  158.377089] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  158.414329] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  159.264259] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  164.295876] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  164.410355] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  165.119039] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  165.313982] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  165.325050] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  168.374589] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  168.511070] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  169.526500] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  169.526614] wlp2s0: authenticated
[  169.527388] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  170.969561] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[  170.981635] wlp2s0: associated
[  177.428931] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  178.813409] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  178.899319] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  178.937365] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  179.787186] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  200.837005] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  200.973847] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  203.002828] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[  203.129982] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  203.129995] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  203.245445] wlp2s0: authenticated
[  203.246245] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  203.294243] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  203.303676] wlp2s0: associated
[  210.312230] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  210.778343] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  210.864288] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  210.901241] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  211.749123] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  216.766218] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  216.902148] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  217.606568] wlp2s0: aborting authentication with 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  217.781800] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  217.788040] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  217.920323] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  217.920340] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  218.026412] wlp2s0: authenticated
[  218.028185] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  218.078076] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  218.085108] wlp2s0: associated
[  222.833743] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  223.316307] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  223.402146] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  223.439808] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  224.289944] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  235.242671] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  235.380682] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  238.454145] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[  238.570248] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  239.606128] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  239.606168] wlp2s0: authenticated
[  239.607113] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  240.664842] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  240.673810] wlp2s0: associated
[  247.247861] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  248.621280] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  248.707331] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  248.744867] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  249.595232] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  260.577233] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  260.716454] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  262.775527] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[  262.900905] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  262.900921] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  263.013323] wlp2s0: authenticated
[  263.014008] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  263.060646] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  263.068754] wlp2s0: associated
[  267.851611] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  268.373023] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  268.459639] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  268.497183] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  269.345615] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  274.369227] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  274.484691] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  275.188157] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  275.367259] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  275.378173] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  278.455039] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  278.584821] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  279.605959] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  279.606011] wlp2s0: authenticated
[  279.606954] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  280.668720] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[  280.683098] wlp2s0: associated
[  287.207356] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  288.569056] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  288.654100] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  288.690432] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  289.540026] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  300.516445] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  300.631853] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  302.647265] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  302.775568] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  302.775580] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  302.888104] wlp2s0: authenticated
[  302.888856] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  303.181898] wlp2s0: associate with 34:60:f9:99:08:38 (try 2/3)
[  303.693855] wlp2s0: associate with 34:60:f9:99:08:38 (try 3/3)
[  304.757941] wlp2s0: association with 34:60:f9:99:08:38 timed out
[  307.417532] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[  307.918410] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[  307.936353] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[  307.936359] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[  307.947906] wlp2s0: authenticated
[  307.948853] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 1/3)
[  307.959026] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 2/3)
[  307.968720] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 3/3)
[  307.978432] wlp2s0: association with a8:29:48:c2:d4:b1 timed out
[  309.168069] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  309.305884] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  309.431026] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  309.431039] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  309.546071] wlp2s0: authenticated
[  309.546820] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  309.593429] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  309.603287] wlp2s0: associated
[  316.717389] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  317.230866] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  317.316869] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  317.353900] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  318.205602] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  323.192938] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  323.307555] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  324.021316] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  324.199642] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  324.211140] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  324.334798] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  324.334815] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  324.447948] wlp2s0: authenticated
[  324.448771] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  324.490764] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[  324.505566] wlp2s0: associated
[  330.667631] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  331.252825] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  331.338751] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  331.376035] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  332.226437] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  337.236590] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  337.351837] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  338.056428] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  338.232078] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  338.243499] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  338.377474] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  338.377487] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  338.480448] wlp2s0: authenticated
[  338.481735] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  338.528268] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[  338.542357] wlp2s0: associated
[  345.168942] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  345.766741] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  345.853145] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  345.891101] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  346.741261] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  351.757076] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  351.898408] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  352.575864] wlp2s0: aborting authentication with 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  352.744313] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  352.750520] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  352.871298] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  352.871311] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  352.986891] wlp2s0: authenticated
[  352.987671] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  353.035828] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  353.044084] wlp2s0: associated
[  359.985251] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  360.568676] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  360.654447] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  360.690677] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  361.539249] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  366.554337] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  366.669127] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  367.388145] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  367.562453] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  367.573787] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  367.706253] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  367.706265] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  367.815620] wlp2s0: authenticated
[  367.816620] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  368.189769] wlp2s0: associate with 34:60:f9:99:08:38 (try 2/3)
[  368.693613] wlp2s0: associate with 34:60:f9:99:08:38 (try 3/3)
[  368.805593] wlp2s0: association with 34:60:f9:99:08:38 timed out
[  371.475368] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[  371.981627] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[  374.005773] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 2/3)
[  374.022341] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[  374.023320] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[  374.034049] wlp2s0: authenticated
[  374.034577] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 1/3)
[  374.050897] wlp2s0: RX AssocResp from a8:29:48:c2:d4:b1 (capab=0x1511 status=0 aid=12)
[  374.060359] wlp2s0: associated
[  374.249933] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a8:29:48:c2:d4:b1
[  377.827931] wlp2s0: deauthenticating from a8:29:48:c2:d4:b1 by local choice (Reason: 3=DEAUTH_LEAVING)
[  378.296755] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  378.381748] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  378.418376] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  379.267119] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  384.285749] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  384.422594] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  385.109336] wlp2s0: aborting authentication with 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  385.278740] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  385.285165] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  388.341624] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[  388.461560] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  389.493617] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  389.493796] wlp2s0: authenticated
[  389.494505] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  390.551605] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  390.561387] wlp2s0: associated
[  397.141108] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  398.541544] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  398.627573] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  398.665275] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  399.516275] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  404.512731] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  404.627269] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  405.342926] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  405.491135] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  405.502445] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  405.635144] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  405.635161] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  405.744169] wlp2s0: authenticated
[  405.745463] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  406.117437] wlp2s0: associate with 34:60:f9:99:08:38 (try 2/3)
[  406.622449] wlp2s0: associate with 34:60:f9:99:08:38 (try 3/3)
[  406.733463] wlp2s0: association with 34:60:f9:99:08:38 timed out
[  407.060604] wlp2s0: authenticate with a8:29:48:c2:d4:b0 (local address=14:5a:fc:77:82:1f)
[  407.223515] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 1/3)
[  409.593738] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 2/3)
[  411.641920] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 3/3)
[  412.226378] wlp2s0: aborting authentication with a8:29:48:c2:d4:b0 by local choice (Reason: 3=DEAUTH_LEAVING)
[  415.255692] wlp2s0: authenticate with a8:29:48:c2:d4:b0 (local address=14:5a:fc:77:82:1f)
[  415.263404] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 1/3)
[  415.292884] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 2/3)
[  415.728905] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 3/3)
[  415.760981] wlp2s0: authentication with a8:29:48:c2:d4:b0 timed out
[  417.460844] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  417.467788] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  417.576569] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  417.589049] wlp2s0: authenticated
[  417.590430] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  417.599493] wlp2s0: associate with 34:60:f9:99:08:38 (try 2/3)
[  417.606007] wlp2s0: associate with 34:60:f9:99:08:38 (try 3/3)
[  417.612360] wlp2s0: association with 34:60:f9:99:08:38 timed out
[  427.210686] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  427.352113] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  429.369817] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[  429.495412] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  429.495428] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  429.606555] wlp2s0: authenticated
[  429.607469] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  429.654129] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  429.663484] wlp2s0: associated
[  434.363871] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  434.915396] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  435.001567] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  435.039672] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  435.890473] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  451.923601] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  452.038958] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  454.069277] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  454.713516] wlp2s0: send auth to 34:60:f9:99:08:38 (try 3/3)
[  454.843215] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  454.843250] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  454.957592] wlp2s0: authenticated
[  454.959257] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  455.018470] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[  455.033025] wlp2s0: associated
[  461.071381] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  461.568367] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  461.654386] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  461.690714] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  462.537742] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  467.534363] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  467.694993] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  467.710913] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  467.717339] wlp2s0: send auth to 34:60:f9:99:08:38 (try 3/3)
[  467.723566] wlp2s0: authentication with 34:60:f9:99:08:38 timed out
[  468.511692] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  468.511698] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  468.534772] wlp2s0: send auth to 34:60:f9:99:08:38 (try 2/3)
[  468.557808] wlp2s0: send auth to 34:60:f9:99:08:38 (try 3/3)
[  468.581206] wlp2s0: authentication with 34:60:f9:99:08:38 timed out
[  469.933616] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[  470.428512] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[  470.447391] wlp2s0: authenticate with a8:29:48:c2:d4:b1 (local address=14:5a:fc:77:82:1f)
[  470.447407] wlp2s0: send auth to a8:29:48:c2:d4:b1 (try 1/3)
[  470.460646] wlp2s0: authenticated
[  470.462180] wlp2s0: associate with a8:29:48:c2:d4:b1 (try 1/3)
[  470.479714] wlp2s0: RX AssocResp from a8:29:48:c2:d4:b1 (capab=0x1511 status=0 aid=12)
[  470.487907] wlp2s0: associated
[  470.706462] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a8:29:48:c2:d4:b1
[  474.289562] wlp2s0: deauthenticating from a8:29:48:c2:d4:b1 by local choice (Reason: 3=DEAUTH_LEAVING)
[  474.839242] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  474.925005] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  474.962407] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  475.810047] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  491.811894] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  491.951416] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  494.005229] wlp2s0: send auth to 34:60:f9:99:08:39 (try 2/3)
[  494.125087] wlp2s0: authenticate with 34:60:f9:99:08:39 (local address=14:5a:fc:77:82:1f)
[  494.126190] wlp2s0: send auth to 34:60:f9:99:08:39 (try 1/3)
[  494.241438] wlp2s0: authenticated
[  494.242096] wlp2s0: associate with 34:60:f9:99:08:39 (try 1/3)
[  494.288886] wlp2s0: RX AssocResp from 34:60:f9:99:08:39 (capab=0x1931 status=0 aid=32)
[  494.298418] wlp2s0: associated
[  501.379607] wlp2s0: deauthenticating from 34:60:f9:99:08:39 by local choice (Reason: 3=DEAUTH_LEAVING)
[  501.854223] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  501.940082] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  501.977948] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  502.827834] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  507.840068] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  507.953214] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  508.646921] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  508.809961] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  508.820884] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  508.955685] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  508.955697] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  509.065316] wlp2s0: authenticated
[  509.067044] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  509.114083] wlp2s0: RX AssocResp from 34:60:f9:99:08:38 (capab=0x1c31 status=0 aid=32)
[  509.128484] wlp2s0: associated
[  515.708710] wlp2s0: deauthenticating from 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  516.301032] mt7921e 0000:02:00.0: ASIC revision: 79610010
[  516.380412] mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250625153620a

[  516.417648] mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20250625153703
[  517.269454] mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
[  522.285022] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  522.399720] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  523.113014] wlp2s0: aborting authentication with 34:60:f9:99:08:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[  523.269633] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  523.280835] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  523.417679] wlp2s0: authenticate with 34:60:f9:99:08:38 (local address=14:5a:fc:77:82:1f)
[  523.417692] wlp2s0: send auth to 34:60:f9:99:08:38 (try 1/3)
[  523.521082] wlp2s0: authenticated
[  523.522974] wlp2s0: associate with 34:60:f9:99:08:38 (try 1/3)
[  523.893011] wlp2s0: associate with 34:60:f9:99:08:38 (try 2/3)
[  523.997180] wlp2s0: associate with 34:60:f9:99:08:38 (try 3/3)
[  524.405065] wlp2s0: association with 34:60:f9:99:08:38 timed out
[  524.717073] wlp2s0: authenticate with a8:29:48:c2:d4:b0 (local address=14:5a:fc:77:82:1f)
[  524.850314] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 1/3)
[  526.905622] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 2/3)
[  529.973068] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 3/3)
[  529.973194] wlp2s0: aborting authentication with a8:29:48:c2:d4:b0 by local choice (Reason: 3=DEAUTH_LEAVING)
[  544.650707] wlp2s0: authenticate with a8:29:48:c2:d4:b0 (local address=14:5a:fc:77:82:1f)
[  545.653005] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 1/3)
[  546.805122] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 2/3)
[  547.893008] wlp2s0: send auth to a8:29:48:c2:d4:b0 (try 3/3)
[  548.297359] wlp2s0: authentication with a8:29:48:c2:d4:b0 timed out
