[PATCH 1/2] wifi: mt76: mt7996: unlink TWT flow if MCU rejects agreement

[Jiale Yao]

The flow is added to dev->twt_list before the agreement is sent to the
firmware. If the firmware rejects the agreement, the flow remains linked
while its flow ID is left available.

A later setup can reuse and reinitialize the linked flow, corrupting the
TWT list. Station removal can also leave the stale entry behind.

Remove the flow from the list when adding the firmware agreement fails.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Jiale Yao <yaojiale02 at 163.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index 1cba381a78b8..a9558381ad91 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -3285,8 +3285,10 @@ void mt7996_mac_add_twt_setup(struct ieee80211_hw *hw,
 	flow->tsf = le64_to_cpu(twt_agrt->twt);
 
 	if (mt7996_mcu_twt_agrt_update(dev, &msta->vif->deflink, flow,
-				       MCU_TWT_AGRT_ADD))
+				       MCU_TWT_AGRT_ADD)) {
+		list_del(&flow->list);
 		goto unlock;
+	}
 
 	setup_cmd = TWT_SETUP_CMD_ACCEPT;
 	dev->twt.table_mask |= BIT(table_id);
-- 
2.34.1