[PATCH 02/23] wifi: mt76: mt7925: add NMI/NDI MAC address setter helpers

[Felix Fietkau]

On 27.09.26 23:02, Sean Wang wrote:
> From: Chengwei Yu <chengwei.yu at mediatek.com>
> 
> Add mt7925_nan_set_nmi_address() and mt7925_nan_set_ndi_address() for
> runtime MAC address changes: NMI goes through the MCU (firmware owns
> the hardware address), NDI updates vif->addr directly.
> 
> Co-developed-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Chengwei Yu <chengwei.yu at mediatek.com>
> ---
>   .../net/wireless/mediatek/mt76/mt7925/nan.c   | 48 +++++++++++++++++++
>   .../net/wireless/mediatek/mt76/mt7925/nan.h   |  8 ++++
>   2 files changed, 56 insertions(+)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/nan.c b/drivers/net/wireless/mediatek/mt76/mt7925/nan.c
> index 8a59f7b1aee2..abbd3f7b081c 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7925/nan.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7925/nan.c
> @@ -697,6 +697,54 @@ void mt7925_nan_mcu_event(struct mt792x_dev *dev, struct sk_buff *skb)
>   	}
>   }
>   
> +int mt7925_nan_set_nmi_address(struct ieee80211_vif *vif,
> +			       struct mt792x_dev *dev,
> +			       const u8 *mac_address)
> +{
> +	struct mt76_dev *mdev = &dev->mt76;
> +	struct {
> +		u8 rsv[4];
> +		struct mt7925_nan_nmi_addr_tlv nmi_addr_tlv;
> +	} nmi_cmd = {
> +		.nmi_addr_tlv = {
> +			.tag = cpu_to_le16(NAN_UNI_CMD_CHANGE_NMI_ADDRESS),
> +			.len = cpu_to_le16(sizeof(struct mt7925_nan_nmi_addr_tlv)),
> +		},
> +	};
> +
> +	if (!dev || !vif || !mac_address)
> +		return -EINVAL;
> +
> +	if (is_zero_ether_addr(mac_address) ||
> +	    is_multicast_ether_addr(mac_address))
> +		return -EINVAL;
> +
> +	memcpy(nmi_cmd.nmi_addr_tlv.nmi_addr, mac_address, ETH_ALEN);
> +
> +	return mt76_mcu_send_msg(mdev, MCU_UNI_CMD(NAN), &nmi_cmd,
> +				 sizeof(nmi_cmd), true);
> +}
> +
> +int mt7925_nan_set_ndi_address(struct ieee80211_vif *vif,
> +			       struct mt792x_dev *dev,
> +			       const u8 *mac_address)
> +{
> +	if (!dev || !vif || !mac_address)
> +		return -EINVAL;
> +
> +	if (is_zero_ether_addr(mac_address) ||
> +	    is_multicast_ether_addr(mac_address))
> +		return -EINVAL;
> +
> +	/*
> +	 * The NDI address is not managed by firmware; it is the vif's own
> +	 * hardware address, so updating it locally is sufficient.
> +	 */
> +	memcpy(vif->addr, mac_address, ETH_ALEN);
What about bss_conf->addr and the netdev addr. Do those need to be updated?

- Felix