[PATCH RFC 10/12] arm64: dts: mediatek: mt8195-cherry: Add M.2 E-key slot

[Chen-Yu Tsai]

The Mt8195 Cherry design features an M.2 E-key slot for WiFi/BT combo
cards. Only PCIe and USB are wired from the SoC to the slot, along with
some auxiliary signals.

Add the proper representation for it, replacing the PCIe wifi node and
vpcie3v3-supply property under the PCIe controller, and the vbus-supply
property under the xhci3 node.

Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
 .../boot/dts/mediatek/mt8195-cherry.dtsi      | 74 +++++++++++++++++--
 1 file changed, 69 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index ef7afc436aef..c95a54de3567 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -266,6 +266,47 @@ tboard_thermistor2: thermal-sensor-t2 {
 						120000 51
 						125000 44>;
 	};
+
+	wifi-bt-connector {
+		compatible = "pcie-m2-e-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_e_key_kill_pins>;
+		vpcie3v3-supply = <&pp3300_wlan>;
+		w-disable1-gpios = <&pio 61 GPIO_ACTIVE_LOW>;
+		w-disable2-gpios = <&pio 59 GPIO_ACTIVE_LOW>;
+		/* PCIe auxiliary signals wired to controller. */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* PCIe for WiFi */
+			port at 0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				wifi_ep: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&pcie1_ep>;
+				};
+			};
+
+			/* USB for Bluetooth */
+			port at 2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				bt_ep: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&usb3_ep>;
+				};
+			};
+
+			/* SDIO, UART and I2S not implemented */
+		};
+	};
 };
 
 &adsp {
@@ -791,14 +832,14 @@ pcie at 0 {
 		reg = <0 0 0 0 0>;
 		device_type = "pci";
 		num-lanes = <1>;
-		vpcie3v3-supply = <&pp3300_wlan>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
-		wifi at 0 {
-			reg = <0 0 0 0 0>;
-			wakeup-source;
+		port {
+			pcie1_ep: endpoint {
+				remote-endpoint = <&wifi_ep>;
+			};
 		};
 	};
 };
@@ -1085,6 +1126,14 @@ pins-bus {
 		};
 	};
 
+	m2_e_key_kill_pins: m2-e-key-kill-pins {
+		pins-kill {
+			pinmux = <PINMUX_GPIO61__FUNC_GPIO61>,
+				 <PINMUX_GPIO59__FUNC_GPIO59>;
+			output-high;
+		};
+	};
+
 	mmc0_pins_default: mmc0-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
@@ -1637,9 +1686,24 @@ &xhci2 {
 &xhci3 {
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
-	vbus-supply = <&pp3300_wlan>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_ep: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&bt_ep>;
+			};
+		};
+	};
 };
 
 #include <arm/cros-ec-keyboard.dtsi>
-- 
2.54.0.563.g4f69b47b94-goog