[PATCH v2 2/8] PCI: cadence: LGA: Add max_link_speed field and 100 ms delay after link training
Hans Zhang
18255117159 at 163.com
Wed May 6 09:14:22 PDT 2026
On 5/7/26 00:03, Manivannan Sadhasivam wrote:
> On Wed, May 06, 2026 at 11:23:40PM +0800, Hans Zhang wrote:
>> The Cadence LGA (Legacy Architecture IP) PCIe host controller currently
>> lacks the mandatory 100 ms delay after link training completes for speeds
>>> 5.0 GT/s, as required by PCIe r6.0 sec 6.6.1.
>>
>> Add a 'max_link_speed' field to struct cdns_pcie to record the maximum
>> supported link speed (or the currently configured speed). In the common
>> host layer function cdns_pcie_host_start_link(), after the link has been
>> successfully established, call pcie_wait_after_link_train() to insert the
>> required delay if max_link_speed > 2.
>>
>> Glue drivers must set max_link_speed appropriately (e.g., from the device
>> tree property "max-link-speed") to enable the delay.
>>
>
> You need to club those glue driver patches into this one. Otherwise, you'll end
> up breaking bisectability.
Hi Mani,
Will change.
Best regards,
Hans
>
> - Mani
>
>> Signed-off-by: Hans Zhang <18255117159 at 163.com>
>> ---
>> drivers/pci/controller/cadence/pcie-cadence-host-common.c | 4 ++++
>> drivers/pci/controller/cadence/pcie-cadence.h | 2 ++
>> 2 files changed, 6 insertions(+)
>>
>> diff --git a/drivers/pci/controller/cadence/pcie-cadence-host-common.c b/drivers/pci/controller/cadence/pcie-cadence-host-common.c
>> index 2b0211870f02..51376f69d007 100644
>> --- a/drivers/pci/controller/cadence/pcie-cadence-host-common.c
>> +++ b/drivers/pci/controller/cadence/pcie-cadence-host-common.c
>> @@ -14,6 +14,7 @@
>>
>> #include "pcie-cadence.h"
>> #include "pcie-cadence-host-common.h"
>> +#include "../../pci.h"
>>
>> #define LINK_RETRAIN_TIMEOUT HZ
>>
>> @@ -115,6 +116,9 @@ int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc,
>> if (!ret && rc->quirk_retrain_flag)
>> ret = cdns_pcie_retrain(pcie, pcie_link_up);
>>
>> + if (!ret)
>> + pcie_wait_after_link_train(pcie->max_link_speed);
>> +
>> return ret;
>> }
>> EXPORT_SYMBOL_GPL(cdns_pcie_host_start_link);
>> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
>> index 574e9cf4d003..e222b095d2b6 100644
>> --- a/drivers/pci/controller/cadence/pcie-cadence.h
>> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
>> @@ -86,6 +86,7 @@ struct cdns_plat_pcie_of_data {
>> * @ops: Platform-specific ops to control various inputs from Cadence PCIe
>> * wrapper
>> * @cdns_pcie_reg_offsets: Register bank offsets for different SoC
>> + * @max_link_speed: maximum supported link speed
>> */
>> struct cdns_pcie {
>> void __iomem *reg_base;
>> @@ -98,6 +99,7 @@ struct cdns_pcie {
>> struct device_link **link;
>> const struct cdns_pcie_ops *ops;
>> const struct cdns_plat_pcie_of_data *cdns_pcie_reg_offsets;
>> + int max_link_speed;
>> };
>>
>> /**
>> --
>> 2.34.1
>>
>
More information about the Linux-mediatek
mailing list