[PATCH] wifi: mt76: mt7925: update clc before setting sar power table

[JB Tsai]

From: "Jared.Huang" <jared.huang at mediatek.com>

Fix the power table update sequence to ensure CLC is loaded before
setting SAR power table.

The firmware requires CLC baseline to be established first
to properly calculate the final power limit as min(clc_limit, rate_limit,sar_limit).

Fixes: 9557b6fe0c8b ("wifi: mt76: mt7925: refine the txpower initialization flow")
Signed-off-by: Jared.Huang <jared.huang at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7925/main.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index a9059866b701..afb2b473bef7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -1824,9 +1824,15 @@ static int mt7925_set_sar_specs(struct ieee80211_hw *hw,
 	int err;
 
 	mt792x_mutex_acquire(dev);
+	err = mt7925_mcu_set_clc(dev, dev->mt76.alpha2,
+			 dev->country_ie_env);
+	if (err < 0)
+		goto out;
+
 	err = mt7925_set_tx_sar_pwr(hw, sar);
-	mt792x_mutex_release(dev);
 
+out:
+	mt792x_mutex_release(dev);
 	return err;
 }
 
-- 
2.45.2