[PATCH] net: ethernet: mtk_wed: fix loading WO firmware for MT7986

[Zhi-Jun You]

MT7986 requires a different mask for second WO firmware.
Without this, WO would timeout after loading FW.

The correct mask was removed when adding WED for MT7988.
Add it back and add a WED version check to fix it.

This can be reproduced with a MT7986 + MT7916 board.

Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988")
Signed-off-by: Zhi-Jun You <hujy652 at gmail.com>
---
 drivers/net/ethernet/mediatek/mtk_wed_mcu.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
index fa6b21603416..0d38183c6ba7 100644
--- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
@@ -367,8 +367,12 @@ mtk_wed_mcu_load_firmware(struct mtk_wed_wo *wo)
 	/* wo firmware reset */
 	wo_w32(MTK_WO_MCU_CFG_LS_WF_MCCR_CLR_ADDR, 0xc00);
 
-	val = wo_r32(MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR) |
-	      MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK;
+	val = wo_r32(MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR);
+
+	if (!mtk_wed_is_v3_or_greater(wo->hw) && wo->hw->index)
+		val |= MTK_WO_MCU_CFG_LS_WF_WM_WA_WA_CPU_RSTB_MASK;
+	else
+		val |= MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK;
 	wo_w32(MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR, val);
 out:
 	release_firmware(fw);
-- 
2.47.3