[PATCH v3 2/5] clk: mediatek: Add mt8173-mfgtop driver

[Brian Masney]

Hi Chen-Yu,

On Mon, Jul 27, 2026 at 05:15:51PM +0800, Chen-Yu Tsai wrote:
> The MFG (GPU) block on the MT8173 has a small glue layer, named MFG_TOP
> in the datasheet, that contains clock gates, some power sequence signal
> delays, and other unknown registers that get toggled when the GPU is
> powered on.
> 
> The clock gates are exposed as clocks provided by a clock controller,
> while the power sequencing bits are exposed as one singular power domain.
> 
> Tested-by: Icenowy Zheng <zhengxingda at iscas.ac.cn>
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
> Changes since v2:
> - Made COMMON_CLK_MT8173_MFGTOP depend on PM
>   - Needed since the driver implements PM domains using the generic PM
>     domain library, which also depends on PM
>   - Fixes build breakage (kernel test robot)
> - Fixed "RST_DELAY_CNT" name (Brian)
> - Dropped unused mfg_desc (Brian)
> - Added check of clk_prepare_enable()'s return value in
>   clk_mt8173_mfgtop_power_on() (Brian)
> - Saved error value for return in IS_ERR(data->clk_26m) branch
>   (Dan Carpenter / kernel test robot w/ smatch)
> ---

[snip]

> +static int clk_mt8173_mfgtop_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	struct mt8173_mfgtop_data *data;
> +	int ret;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, data);
> +
> +	data->clk_data = mtk_devm_alloc_clk_data(dev, ARRAY_SIZE(mfg_clks));
> +	if (!data->clk_data)
> +		return -ENOMEM;
> +
> +	/* MTK clock gates also uses regmap */
> +	data->regmap = device_node_to_regmap(node);
> +	if (IS_ERR(data->regmap))
> +		return dev_err_probe(dev, PTR_ERR(data->regmap), "Failed to get regmap\n");
> +
> +	data->child_pd.np = node;
> +	data->child_pd.args_count = 0;
> +	ret = of_parse_phandle_with_args(node, "power-domains", "#power-domain-cells", 0,
> +					 &data->parent_pd);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to parse power domain\n");
> +
> +	devm_pm_runtime_enable(dev);
> +	/*
> +	 * Do a pm_runtime_resume_and_get() to workaround a possible
> +	 * deadlock between clk_register() and the genpd framework.
> +	 */
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Failed to runtime resume device\n");
> +		goto put_of_node;
> +	}
> +
> +	ret = mtk_clk_register_gates(dev, node, mfg_clks, ARRAY_SIZE(mfg_clks),
> +				     data->clk_data);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Failed to register clock gates\n");
> +		goto put_pm_runtime;
> +	}
> +
> +	data->clk_26m = clk_hw_get_clk(data->clk_data->hws[CLK_MFG_26M], "26m");
> +	if (IS_ERR(data->clk_26m)) {
> +		ret = dev_err_probe(dev, PTR_ERR(data->clk_26m), "Failed to get 26 MHz clock\n");
> +		goto unregister_clks;
> +	}
> +
> +	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, data->clk_data);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Failed to add clk OF provider\n");
> +		goto put_26m_clk;
> +	}
> +
> +	data->genpd.name = "mfg-top";
> +	data->genpd.power_on = clk_mt8173_mfgtop_power_on;
> +	data->genpd.power_off = clk_mt8173_mfgtop_power_off;
> +	ret = pm_genpd_init(&data->genpd, NULL, true);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Failed to add power domain\n");
> +		goto del_clk_provider;
> +	}
> +
> +	ret = of_genpd_add_provider_simple(node, &data->genpd);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Failed to add power domain OF provider\n");
> +		goto remove_pd;
> +	}
> +
> +	ret = of_genpd_add_subdomain(&data->parent_pd, &data->child_pd);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Failed to link PM domains\n");
> +		goto del_pd_provider;
> +	}
> +
> +	pm_runtime_put(dev);
> +	return 0;
> +
> +del_pd_provider:
> +	of_genpd_del_provider(node);
> +remove_pd:
> +	pm_genpd_remove(&data->genpd);
> +del_clk_provider:
> +	of_clk_del_provider(node);
> +put_26m_clk:
> +	clk_put(data->clk_26m);
> +unregister_clks:
> +	mtk_clk_unregister_gates(mfg_clks, ARRAY_SIZE(mfg_clks), data->clk_data);
> +put_pm_runtime:
> +	pm_runtime_put(dev);
> +put_of_node:
> +	of_node_put(data->parent_pd.np);
> +	return ret;
> +}
> +
> +static void clk_mt8173_mfgtop_remove(struct platform_device *pdev)
> +{
> +	struct mt8173_mfgtop_data *data = platform_get_drvdata(pdev);
> +	struct device_node *node = pdev->dev.of_node;
> +
> +	of_genpd_remove_subdomain(&data->parent_pd, &data->child_pd);
> +	of_genpd_del_provider(node);
> +	pm_genpd_remove(&data->genpd);
> +	of_clk_del_provider(node);
> +	clk_put(data->clk_26m);
> +	mtk_clk_unregister_gates(mfg_clks, ARRAY_SIZE(mfg_clks), data->clk_data);

Looking at the error labels in the probe, does the remove also need:

    of_node_put(data->parent_pd.np);

Otherwise this looks good. With that fixed:

Reviewed-by: Brian Masney <bmasney at redhat.com>