[PATCH v8 2/5] Bluetooth: btmtksdio: Pass hardware dev_id to mt79xx_setup()

[Chris Lu]

Pass the device ID read from hardware register (0x70010200) to
mt79xx_setup() instead of hardcoded 0, ensuring SDIO devices display
the correct chip ID in firmware logs.

This matches the USB driver behavior which reads from the same hardware
register. The hardware register is the authoritative source for chip
identification, superior to using the static chipid from device table.

Fixes: 28b7c5a6db74 ("Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support")
Signed-off-by: Chris Lu <chris.lu at mediatek.com>
Assisted-by: Claude:Sonnet-4.5
---
 drivers/bluetooth/btmtksdio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 5b0fab7b89b5..c90b3fa8ba5a 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -876,14 +876,14 @@ static int mt76xx_setup(struct hci_dev *hdev, const char *fwname)
 	return 0;
 }
 
-static int mt79xx_setup(struct hci_dev *hdev, const char *fwname)
+static int mt79xx_setup(struct hci_dev *hdev, const char *fwname, u32 dev_id)
 {
 	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
 	struct btmtk_hci_wmt_params wmt_params;
 	u8 param = 0x1;
 	int err;
 
-	err = btmtk_setup_firmware_79xx(hdev, fwname, mtk_hci_wmt_sync, 0);
+	err = btmtk_setup_firmware_79xx(hdev, fwname, mtk_hci_wmt_sync, dev_id);
 	if (err < 0) {
 		bt_dev_err(hdev, "Failed to setup 79xx firmware (%d)", err);
 		return err;
@@ -1142,7 +1142,7 @@ static int btmtksdio_setup(struct hci_dev *hdev)
 		snprintf(fwname, sizeof(fwname),
 			 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
 			 dev_id & 0xffff, (fw_version & 0xff) + 1);
-		err = mt79xx_setup(hdev, fwname);
+		err = mt79xx_setup(hdev, fwname, dev_id);
 		if (err < 0)
 			return err;
 
-- 
2.45.2