[PATCH 09/45] clk: fractional-divider: Make sure clk_init_data is fully initialized

[Geert Uytterhoeven]

The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need.  However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.

Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Compile-tested only.
---
 drivers/clk/clk-fractional-divider.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index 1c5fdcb68a5048e3..c8e00d75cd14d8f1 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -271,7 +271,7 @@ struct clk_hw *clk_hw_register_fractional_divider(struct device *dev,
 		u8 clk_divider_flags, spinlock_t *lock)
 {
 	struct clk_fractional_divider *fd;
-	struct clk_init_data init;
+	struct clk_init_data init = {};
 	struct clk_hw *hw;
 	int ret;
 
-- 
2.43.0