[PATCH v4 7/7] arm64: dts: mt8167: Properly describe the SoC watchdog and mmsys resets

[Luca Leonardo Scorcia]

Currently mt8167 inherits its watchdog from the included mt8516 dtsi,
which in turn falls back on mt6589-wdt. However according to the data
sheet mt8167 toprgu is not really compatible with mt6589 (it has 14 sw
resets instead of 12, and the reset IDs are different from mt6589).

Use the dedicated mediatek,mt8167-wdt compatible for the watchdog driver,
as it correctly describes the SoC resets.

Also add support for mmsys resets by declaring the reset-cells property.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia at gmail.com>
---
 arch/arm64/boot/dts/mediatek/mt8167.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 27cf32d7ae35..cccc487086a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -8,6 +8,8 @@
 #include <dt-bindings/clock/mt8167-clk.h>
 #include <dt-bindings/memory/mt8167-larb-port.h>
 #include <dt-bindings/power/mt8167-power.h>
+#include <dt-bindings/reset/mediatek,mt8167-mmsys.h>
+#include <dt-bindings/reset/mediatek,mt8167-wdt.h>
 
 #include "mt8167-pinfunc.h"
 
@@ -95,6 +97,13 @@ power-domain at MT8167_POWER_DOMAIN_CONN {
 			};
 		};
 
+		watchdog: watchdog at 10007000 {
+			compatible = "mediatek,mt8167-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl at 1000b000 {
 			compatible = "mediatek,mt8167-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
@@ -124,6 +133,7 @@ mmsys: syscon at 14000000 {
 			compatible = "mediatek,mt8167-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		larb0: larb at 14016000 {
-- 
2.43.0