[PATCH 2/2] arm64: dts: mediatek: mt7981b: OpenWrt One: set console UART to 115200

[Daniel Golle]

On Fri, Sep 19, 2025 at 07:06:12PM -0500, bryan at bryanhinton.com wrote:
> Use the new uart0 label for the console and make the speed explicit by
> adding current-speed = <115200>. This keeps the DTS OS-agnostic: no
> bootargs or distribution-specific properties are added.
> 
> Verification: Boot-tested with mainline Image+DTB via U-Boot on OpenWrt
> One (MT7981B). Serial console active at 115200 baud, and DTB decompile
> confirms serial0 alias and stdout-path set correctly.
> 
> Signed-off-by: Bryan Hinton <bryan at bryanhinton.com>

Reviewed-by: Daniel Golle <daniel at makrotopia.org>

See comment below
> ---
>  .../arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
> index 4f6cbb491287..1d2c3a21019c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
> @@ -8,8 +8,21 @@ / {
>  	compatible = "openwrt,one", "mediatek,mt7981b";
>  	model = "OpenWrt One";
>  
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
>  	memory at 40000000 {
>  		reg = <0 0x40000000 0 0x40000000>;
>  		device_type = "memory";
>  	};
>  };
> +
> +&uart0 {
> +	status = "okay";
> +	current-speed = <115200>; /* 0x1c200 */

The comment with the hex value should be removed. There is no need for it.

> +};
> -- 
> 2.51.0
> 
>