[PATCH v3 3/3] arm64: dts: mediatek: mt8395-nio-12l: add support for blue and red LEDs

[Matthias Brugger]

On 05/09/2025 13:52, Julien Massot wrote:
> The Radxa NIO 12L board has an RGB LED, of which only red and blue
> are controllable.
> 
> Red and blue LEDs: no need to choose, both are enabled.
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> Signed-off-by: Julien Massot <julien.massot at collabora.com>
> ---
>   .../boot/dts/mediatek/mt8395-radxa-nio-12l.dts     | 29 ++++++++++++++++++++++
>   1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> index fd596e2298285361ad7c2fb828feec598d75a73e..0ea36e7c960fc0b2607833d743c5e2e806864600 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> @@ -10,6 +10,7 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/input/input.h>
>   #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
>   #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
>   #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
>   #include <dt-bindings/spmi/spmi.h>
> @@ -73,6 +74,26 @@ button-volume-up {
>   		};
>   	};
>   
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&gpio_leds_pins>;
> +		pinctrl-names = "default";
> +
> +		/*
> +		 * This board has a RGB LED, of which only R and B
> +		 * are controllable.
> +		 */
> +		rgb-blue {

Please fix the DT warnings and submit again.

Matthias

> +			color = <LED_COLOR_ID_BLUE>;
> +			gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		led-1 {
> +			color = <LED_COLOR_ID_RED>;
> +			gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
>   	wifi_vreg: regulator-wifi-3v3-en {
>   		compatible = "regulator-fixed";
>   		regulator-name = "wifi_3v3_en";
> @@ -647,6 +668,14 @@ pins {
>   		};
>   	};
>   
> +	gpio_leds_pins: gpio-leds-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>,
> +				 <PINMUX_GPIO7__FUNC_GPIO7>;
> +			output-low;
> +		};
> +	};
> +
>   	i2c2_pins: i2c2-pins {
>   		pins-bus {
>   			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
>