[net-next PATCH v16 06/10] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver

[Russell King (Oracle)]

On Tue, Sep 09, 2025 at 02:43:37AM +0200, Christian Marangi wrote:
> +static void an8855_phylink_get_caps(struct dsa_switch *ds, int port,
> +				    struct phylink_config *config)
> +{
> +	struct an8855_priv *priv = ds->priv;
> +	u32 reg;
> +	int ret;
> +
> +	switch (port) {
> +	case 0:
> +	case 1:
> +	case 2:
> +	case 3:
> +	case 4:
> +		__set_bit(PHY_INTERFACE_MODE_GMII,
> +			  config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
> +			  config->supported_interfaces);
> +		break;
> +	case 5:
> +		phy_interface_set_rgmii(config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_SGMII,
> +			  config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
> +			  config->supported_interfaces);
> +		break;
> +	}
> +
> +	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> +				   MAC_10 | MAC_100 | MAC_1000FD | MAC_2500FD;
> +
> +	ret = regmap_read(priv->regmap, AN8855_CKGCR, &reg);
> +	if (ret)
> +		dev_err(ds->dev, "failed to read EEE LPI timer\n");
> +
> +	config->lpi_capabilities = MAC_100FD | MAC_1000FD;
> +	/* Global LPI TXIDLE Threshold, default 60ms (unit 2us) */
> +	config->lpi_timer_default = FIELD_GET(AN8855_LPI_TXIDLE_THD_MASK, reg) *
> +				    AN8855_TX_LPI_UNIT;

You're not filling in config->lpi_interfaces, which means phylink won't
LPI won't be functional.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!