[PATCH 15/32] media: i2c: mt9v111: Use %pe format specifier

[Ricardo Ribalda]

The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().

This patch fixes this cocci report:
./i2c/mt9v111.c:1143:3-10: WARNING: Consider using %pe to print PTR_ERR()
./i2c/mt9v111.c:1151:3-10: WARNING: Consider using %pe to print PTR_ERR()
./i2c/mt9v111.c:1159:3-10: WARNING: Consider using %pe to print PTR_ERR()

Signed-off-by: Ricardo Ribalda <ribalda at chromium.org>
---
 drivers/media/i2c/mt9v111.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/mt9v111.c b/drivers/media/i2c/mt9v111.c
index b4f2703faa1854a3a5e7d92ef312d01a39879a5a..64a758c95ab7b767de452304615a8d1f986dd23d 100644
--- a/drivers/media/i2c/mt9v111.c
+++ b/drivers/media/i2c/mt9v111.c
@@ -1139,24 +1139,24 @@ static int mt9v111_probe(struct i2c_client *client)
 	mt9v111->oe = devm_gpiod_get_optional(&client->dev, "enable",
 					      GPIOD_OUT_LOW);
 	if (IS_ERR(mt9v111->oe)) {
-		dev_err(&client->dev, "Unable to get GPIO \"enable\": %ld\n",
-			PTR_ERR(mt9v111->oe));
+		dev_err(&client->dev, "Unable to get GPIO \"enable\": %pe\n",
+			mt9v111->oe);
 		return PTR_ERR(mt9v111->oe);
 	}
 
 	mt9v111->standby = devm_gpiod_get_optional(&client->dev, "standby",
 						   GPIOD_OUT_HIGH);
 	if (IS_ERR(mt9v111->standby)) {
-		dev_err(&client->dev, "Unable to get GPIO \"standby\": %ld\n",
-			PTR_ERR(mt9v111->standby));
+		dev_err(&client->dev, "Unable to get GPIO \"standby\": %pe\n",
+			mt9v111->standby);
 		return PTR_ERR(mt9v111->standby);
 	}
 
 	mt9v111->reset = devm_gpiod_get_optional(&client->dev, "reset",
 						 GPIOD_OUT_LOW);
 	if (IS_ERR(mt9v111->reset)) {
-		dev_err(&client->dev, "Unable to get GPIO \"reset\": %ld\n",
-			PTR_ERR(mt9v111->reset));
+		dev_err(&client->dev, "Unable to get GPIO \"reset\": %pe\n",
+			mt9v111->reset);
 		return PTR_ERR(mt9v111->reset);
 	}
 

-- 
2.51.0.760.g7b8bcc2412-goog