[PATCH] pinctrl: mediatek: mt8196: align register base names to dt-bindings ones

[Louis-Alexis Eyraud]

The mt8196-pinctrl driver requires to probe that a device tree uses
in the device node the same names than mt8196_pinctrl_register_base_names
array. But they are not matching the required ones in the
"mediatek,mt8196-pinctrl" dt-bindings, leading to possible dtbs check
issues.
So, align all mt8196_pinctrl_register_base_names entries on dt-bindings
ones.

Fixes: f7a29377c253 ("pinctrl: mediatek: Add pinctrl driver on mt8196")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud at collabora.com>
---
 drivers/pinctrl/mediatek/pinctrl-mt8196.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8196.c b/drivers/pinctrl/mediatek/pinctrl-mt8196.c
index 82a73929c7a0fc0fb841b5fe313d905c8478044a..dec957c1724b014522a70ed38057e162fe9e25af 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8196.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8196.c
@@ -1801,10 +1801,8 @@ static const struct mtk_pin_reg_calc mt8196_reg_cals[PINCTRL_PIN_REG_MAX] = {
 };
 
 static const char * const mt8196_pinctrl_register_base_names[] = {
-	"iocfg0", "iocfg_rt", "iocfg_rm1", "iocfg_rm2",
-	"iocfg_rb", "iocfg_bm1", "iocfg_bm2", "iocfg_bm3",
-	"iocfg_lt", "iocfg_lm1", "iocfg_lm2", "iocfg_lb1",
-	"iocfg_lb2", "iocfg_tm1", "iocfg_tm2", "iocfg_tm3",
+	"base", "rt", "rm1", "rm2", "rb", "bm1", "bm2", "bm3",
+	"lt", "lm1", "lm2", "lb1", "lb2", "tm1", "tm2", "tm3",
 };
 
 static const struct mtk_eint_hw mt8196_eint_hw = {

---
base-commit: 4a7bcf9e0158d9976525370ff84401a1e955bbee
change-id: 20251003-fix-mt8196-pinctrl-regnames-60d30873ca23

Best regards,
-- 
Louis-Alexis Eyraud <louisalexis.eyraud at collabora.com>