[patch] wifi: mt76: fix wifi init fail by setting MCU_RUNNING state after CLC load

[Quan Zhou]

Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.

Signed-off-by: Quan Zhou <quan.zhou at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 2 +-
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 8c5e6bdc0fc9..833d0ab64230 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -646,10 +646,10 @@ int mt7921_run_firmware(struct mt792x_dev *dev)
 	if (err)
 		return err;
 
-	set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
 	err = mt7921_load_clc(dev, mt792x_ram_name(dev));
 	if (err)
 		return err;
+	set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
 
 	return mt7921_mcu_fw_log_2_host(dev, 1);
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index d8f5ecebf5dc..cf0fdea45cf7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -1054,10 +1054,10 @@ int mt7925_run_firmware(struct mt792x_dev *dev)
 	if (err)
 		return err;
 
-	set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
 	err = mt7925_load_clc(dev, mt792x_ram_name(dev));
 	if (err)
 		return err;
+	set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
 
 	return mt7925_mcu_fw_log_2_host(dev, 1);
 }
-- 
2.45.2