Re: i2c issues in 6.18 on R4, but not r4pro (both mt7988 with i2c-mux on i2c2)

[Frank Wunderlich]

Am 5. November 2025 12:51:23 MEZ schrieb Wolfram Sang <wsa+renesas at sang-engineering.com>:
>
>> > Maybe this option should be enabled by default or when the i2c-mux is
>> > selected?
>> 
>> That's what we were discussing. At least a warning will now get printed
>> to the logs when booting suggesting the above solution.
>
>FYI, all the commits leading to this breakage are reverted now. Sorry
>for your troubles!

Why? My issue was solved by adding GPIO_RESET... So it was fault on my side,sorry for bothering.

@angelo
yes it is a final board BPI-R4 v1.1.

Why sometimes it works i guess it is because uboot may previously initialize the device (and without reset working it may be stuck in wrong state).
I'm not sure if my current flashed version had the i2c and i2cmux support,but i got it working on that board because of the connected eeprom (read mac address via tlv_eeprom as macs do not have fixed macs via efuse afaik).

Thanks for help so far.

regards Frank