[net-next PATCH 2/3] net: dsa: mt7530: Add AN7583 support

[Christian Marangi]

Add Airoha AN7583 Switch support. This is based on Airoha EN7581 that is
based on Mediatek MT7988 Switch.

Airoha AN7583 require additional tweak to the GEPHY_CONN_CFG register to
make the internal PHY work.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 drivers/net/dsa/mt7530-mmio.c |  1 +
 drivers/net/dsa/mt7530.c      | 24 ++++++++++++++++++++++--
 drivers/net/dsa/mt7530.h      | 18 ++++++++++++++----
 3 files changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c
index 5f2db4317dd3..842d74268e77 100644
--- a/drivers/net/dsa/mt7530-mmio.c
+++ b/drivers/net/dsa/mt7530-mmio.c
@@ -11,6 +11,7 @@
 #include "mt7530.h"
 
 static const struct of_device_id mt7988_of_match[] = {
+	{ .compatible = "airoha,an7583-switch", .data = &mt753x_table[ID_AN7583], },
 	{ .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], },
 	{ .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
 	{ /* sentinel */ },
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 7361380ffb5f..df213c37b4fe 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1298,7 +1298,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 	 * is affine to the inbound user port.
 	 */
 	if (priv->id == ID_MT7531 || priv->id == ID_MT7988 ||
-	    priv->id == ID_EN7581)
+	    priv->id == ID_EN7581 || priv->id == ID_AN7583)
 		mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
 
 	/* CPU port gets connected to all user ports of
@@ -2612,7 +2612,7 @@ mt7531_setup_common(struct dsa_switch *ds)
 	mt7530_set(priv, MT753X_AGC, LOCAL_EN);
 
 	/* Enable Special Tag for rx frames */
-	if (priv->id == ID_EN7581)
+	if (priv->id == ID_EN7581 || priv->id == ID_AN7583)
 		mt7530_write(priv, MT753X_CPORT_SPTAG_CFG,
 			     CPORT_SW2FE_STAG_EN | CPORT_FE2SW_STAG_EN);
 
@@ -3236,6 +3236,16 @@ static int mt7988_setup(struct dsa_switch *ds)
 	reset_control_deassert(priv->rstc);
 	usleep_range(20, 50);
 
+	/* AN7583 require additional tweak to CONN_CFG */
+	if (priv->id == ID_AN7583)
+		mt7530_rmw(priv, AN7583_GEPHY_CONN_CFG,
+			   AN7583_CSR_DPHY_CKIN_SEL |
+			   AN7583_CSR_PHY_CORE_REG_CLK_SEL |
+			   AN7583_CSR_ETHER_AFE_PWD,
+			   AN7583_CSR_DPHY_CKIN_SEL |
+			   AN7583_CSR_PHY_CORE_REG_CLK_SEL |
+			   FIELD_PREP(AN7583_CSR_ETHER_AFE_PWD, 0));
+
 	/* Reset the switch PHYs */
 	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
 
@@ -3344,6 +3354,16 @@ const struct mt753x_info mt753x_table[] = {
 		.phy_write_c45 = mt7531_ind_c45_phy_write,
 		.mac_port_get_caps = en7581_mac_port_get_caps,
 	},
+	[ID_AN7583] = {
+		.id = ID_AN7583,
+		.pcs_ops = &mt7530_pcs_ops,
+		.sw_setup = mt7988_setup,
+		.phy_read_c22 = mt7531_ind_c22_phy_read,
+		.phy_write_c22 = mt7531_ind_c22_phy_write,
+		.phy_read_c45 = mt7531_ind_c45_phy_read,
+		.phy_write_c45 = mt7531_ind_c45_phy_write,
+		.mac_port_get_caps = en7581_mac_port_get_caps,
+	},
 };
 EXPORT_SYMBOL_GPL(mt753x_table);
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index d4b838a055ad..7e47cd9af256 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -20,6 +20,7 @@ enum mt753x_id {
 	ID_MT7531 = 2,
 	ID_MT7988 = 3,
 	ID_EN7581 = 4,
+	ID_AN7583 = 5,
 };
 
 #define	NUM_TRGMII_CTRL			5
@@ -66,7 +67,8 @@ enum mt753x_id {
 
 #define MT753X_MIRROR_REG(id)		((id == ID_MT7531 || \
 					  id == ID_MT7988 || \
-					  id == ID_EN7581) ? \
+					  id == ID_EN7581 || \
+					  id == ID_AN7583) ? \
 					 MT7531_CFC : MT753X_MFC)
 
 #define MT753X_MIRROR_EN(id)		((id == ID_MT7531 || \
@@ -76,19 +78,22 @@ enum mt753x_id {
 
 #define MT753X_MIRROR_PORT_MASK(id)	((id == ID_MT7531 || \
 					  id == ID_MT7988 || \
-					  id == ID_EN7581) ? \
+					  id == ID_EN7581 || \
+					  id == ID_AN7583) ? \
 					 MT7531_MIRROR_PORT_MASK : \
 					 MT7530_MIRROR_PORT_MASK)
 
 #define MT753X_MIRROR_PORT_GET(id, val)	((id == ID_MT7531 || \
 					  id == ID_MT7988 || \
-					  id == ID_EN7581) ? \
+					  id == ID_EN7581 || \
+					  id == ID_AN7583) ? \
 					 MT7531_MIRROR_PORT_GET(val) : \
 					 MT7530_MIRROR_PORT_GET(val))
 
 #define MT753X_MIRROR_PORT_SET(id, val)	((id == ID_MT7531 || \
 					  id == ID_MT7988 || \
-					  id == ID_EN7581) ? \
+					  id == ID_EN7581 || \
+					  id == ID_AN7583) ? \
 					 MT7531_MIRROR_PORT_SET(val) : \
 					 MT7530_MIRROR_PORT_SET(val))
 
@@ -673,6 +678,11 @@ enum mt7531_xtal_fsel {
 #define  CPORT_SW2FE_STAG_EN		BIT(1)
 #define  CPORT_FE2SW_STAG_EN		BIT(0)
 
+#define AN7583_GEPHY_CONN_CFG		0x7c14
+#define  AN7583_CSR_DPHY_CKIN_SEL	BIT(31)
+#define  AN7583_CSR_PHY_CORE_REG_CLK_SEL BIT(30)
+#define  AN7583_CSR_ETHER_AFE_PWD	GENMASK(28, 24)
+
 /* Registers for LED GPIO control (MT7530 only)
  * All registers follow this pattern:
  * [ 2: 0]  port 0
-- 
2.48.1