[PATCH 2/7] arm64: dts: mediatek: use proper node names for GPIO based I2C busses

[Wolfram Sang]

There shall not be a '-' before the number.

Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
---
 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index ed79ad1ae871..d0e1d8f064c4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -64,7 +64,7 @@ wps-key {
 	};
 
 	/* i2c of the left SFP cage (wan) */
-	i2c_sfp1: i2c-gpio-0 {
+	i2c_sfp1: i2c-gpio0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -74,7 +74,7 @@ i2c_sfp1: i2c-gpio-0 {
 	};
 
 	/* i2c of the right SFP cage (lan) */
-	i2c_sfp2: i2c-gpio-1 {
+	i2c_sfp2: i2c-gpio1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-- 
2.47.2