[PATCH mt76-next 2/9] wifi: mt76: mt7996: fix beamformee SS field

[Shayne Chen]

From: Howard Hsu <howard-yh.hsu at mediatek.com>

Fix the beamformee SS field for the mt7996, mt7992 and mt7990 chipsets.
For the mt7992, this value shall be set to 0x4, while the others shall
be set to 0x3.

Fixes: 5b20557593d4 ("wifi: mt76: connac: adjust phy capabilities based on band constraints")
Signed-off-by: Howard Hsu <howard-yh.hsu at mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index b77fa94df8c7..5c545293f294 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -1121,12 +1121,12 @@ mt7996_set_stream_he_txbf_caps(struct mt7996_phy *phy,
 
 	c = IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE;
 
-	if (is_mt7996(phy->mt76->dev))
-		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 |
-		     (IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 * non_2g);
-	else
+	if (is_mt7992(phy->mt76->dev))
 		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 |
 		     (IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 * non_2g);
+	else
+		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 |
+		     (IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 * non_2g);
 
 	elem->phy_cap_info[4] |= c;
 
-- 
2.39.2