[PATCH v5 0/7] Add EcoNet EN751221 MIPS platform support

[Daniel Lezcano]

On 5/13/25 17:12, Thomas Bogendoerfer wrote:
> On Tue, May 13, 2025 at 04:24:51PM +0200, Daniel Lezcano wrote:
>> On Wed, May 07, 2025 at 01:44:53PM +0000, Caleb James DeLisle wrote:
>>> EcoNet MIPS SoCs are big endian machines based on 34Kc and 1004Kc
>>> processors. They are found in xDSL and xPON modems, and contain PCM
>>> (VoIP), Ethernet, USB, GPIO, I2C, SPI (Flash), UART, and PCIe.
>>>
>>> The EcoNet MIPS SoCs are divided broadly into two families, the
>>> EN751221 family based on the 34Kc, and the EN751627 family based on
>>> the 1004Kc. Individual SoCs within a family are very similar, only
>>> with different peripherals.
>>>
>>> This patchset adds basic "boots to a console" support for the EN751221
>>> family and adds SmartFiber XP8421-B, a low cost commercially available
>>> board that is useful for testing and development.
>>>
>>> Note that Airoha (AN7523, AN7581) is similar to EcoNet in terms of
>>> peripherals, and for historical reasons Airoha chips are sometimes
>>> referred to with the EN75xx prefix. However this is a different
>>> platform because Airoha chips are ARM based.
>>>
>>> This patchset is against mips-next.
>>>
>>> v4 -> v5
>>> * 2/7 clocksource/drivers: Add EcoNet Timer HPT driver:
>>>    * Improve explanation of HPT timer in changelog
>>>    * Move pr_info to pr_debug per recommendation
>>>    * Remove pointless debug on spurious interrupt
>>>    * Small code-style change
>>
>> Shall I pick the clocksource + bindings changes through my tree ?
> 
> please do, I'll take the remaining patches.


Applied patch 1 et 2, thanks!


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog