[PATCH AUTOSEL 6.12 064/486] wifi: mt76: mt7925: fix fails to enter low power mode in suspend state

[Sasha Levin]

From: Quan Zhou <quan.zhou at mediatek.com>

[ Upstream commit 2d5630b0c9466ac6549495828aa7dce7424a272a ]

The mt7925 sometimes fails to enter low power mode during suspend.
This is caused by the chip firmware sending an additional ACK event
to the host after processing the suspend command. Due to timing issues,
this event may not reach the host, causing the chip to get stuck.
To resolve this, the ACK flag in the suspend command is removed,
as it is not needed in the MT7925 architecture. This prevents the
firmware from sending the additional ACK event, ensuring the device
can reliably enter low power mode during suspend.

Signed-off-by: Quan Zhou <quan.zhou at mediatek.com>
Link: https://patch.msgid.link/d056938144a3a0336c3a4e3cec6f271899f32bf7.1736775666.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd at nbd.name>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 5b14bf434df36..2396e1795fe17 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -3287,6 +3287,9 @@ int mt7925_mcu_fill_message(struct mt76_dev *mdev, struct sk_buff *skb,
 		else
 			uni_txd->option = MCU_CMD_UNI_EXT_ACK;
 
+		if (cmd == MCU_UNI_CMD(HIF_CTRL))
+			uni_txd->option &= ~MCU_CMD_ACK;
+
 		goto exit;
 	}
 
-- 
2.39.5