[PATCH 2/2] arm64: dts: mediatek: mt8365: Describe infracfg-nao as a pure syscon

[Nícolas F. R. A. Prado]

The infracfg-nao register space at 0x1020e000 has different registers
than the infracfg space at 0x10001000, and most importantly, doesn't
contain any clock controls. Therefore it shouldn't use the same
compatible used for the mt8365 infracfg clocks driver:
mediatek,mt8365-infracfg. Since it currently does, probe errors are
reported in the kernel logs:

  [    0.245959] Failed to register clk ifr_pmic_tmr: -EEXIST
  [    0.245998] clk-mt8365 1020e000.infracfg: probe with driver clk-mt8365 failed with error -17

This register space is used only as a syscon for bus control by the
power domain controller, so in order to properly describe it and fix the
errors, set its compatible to a distinct compatible used exclusively as
a syscon, drop the clock-cells, and while at it rename the node to
'syscon' following the naming convention.

Fixes: 6ff945376556 ("arm64: dts: mediatek: Initial mt8365-evk support")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8365.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index e6d2b3221a3b7a855129258b379ae4bc2fd05449..49ad4dee9c4cf563743dc55d5e0b055cfb69986a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -495,10 +495,9 @@ iommu: iommu at 10205000 {
 			#iommu-cells = <1>;
 		};
 
-		infracfg_nao: infracfg at 1020e000 {
-			compatible = "mediatek,mt8365-infracfg", "syscon";
+		infracfg_nao: syscon at 1020e000 {
+			compatible = "mediatek,mt8365-infracfg-nao", "syscon";
 			reg = <0 0x1020e000 0 0x1000>;
-			#clock-cells = <1>;
 		};
 
 		rng: rng at 1020f000 {

-- 
2.49.0