[PATCH v2 09/29] dt-bindings: clock: mediatek: Describe MT8196 peripheral clock controllers

[Krzysztof Kozlowski]

On 25/06/2025 10:20, AngeloGioacchino Del Regno wrote:
> Il 24/06/25 18:02, Krzysztof Kozlowski ha scritto:
>> On 24/06/2025 16:32, Laura Nao wrote:
>>> +  '#reset-cells':
>>> +    const: 1
>>> +    description:
>>> +      Reset lines for PEXTP0/1 and UFS blocks.
>>> +
>>> +  mediatek,hardware-voter:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle
>>> +    description:
>>> +      On the MT8196 SoC, a Hardware Voter (HWV) backed by a fixed-function
>>> +      MCU manages clock and power domain control across the AP and other
>>> +      remote processors. By aggregating their votes, it ensures clocks are
>>> +      safely enabled/disabled and power domains are active before register
>>> +      access.
>>
>> Resource voting is not via any phandle, but either interconnects or
>> required opps for power domain.
> 
> Sorry, I'm not sure who is actually misunderstanding what, here... let me try to
> explain the situation:
> 
> This is effectively used as a syscon - as in, the clock controllers need to perform
> MMIO R/W on both the clock controller itself *and* has to place a vote to the clock
> controller specific HWV register.

syscon is not the interface to place a vote for clocks. "clocks"
property is.

> 
> This is done for MUX-GATE and GATE clocks, other than for power domains.
> 
> Note that the HWV system is inside of the power domains controller, and it's split
> on a per hardware macro-block basis (as per usual MediaTek hardware layout...).
> 
> The HWV, therefore, does *not* vote for clock *rates* (so, modeling OPPs would be
> a software quirk, I think?), does *not* manage bandwidth (and interconnect is for
> voting BW only?), and is just a "switch to flip".

That's still clocks. Gate is a clock.

> 
> Is this happening because the description has to be improved and creating some
> misunderstanding, or is it because we are underestimating and/or ignoring something
> here?
> 

Other vendors, at least qcom, represent it properly - clocks. Sometimes
they mix up and represent it as power domains, but that's because
downstream is a mess and because we actually (at upstream) don't really
know what is inside there - is it a clock or power domain.


Best regards,
Krzysztof