[PATCH 1/3] dt-bindings: pinctrl: mediatek: Add support for mt8189
Rob Herring
robh at kernel.org
Thu Jun 5 11:44:11 PDT 2025
On Fri, May 23, 2025 at 05:42:46PM +0800, Cathy Xu wrote:
> Add the new binding document for pinctrl on MediaTek mt8189.
>
> Signed-off-by: Cathy Xu <ot_cathy.xu at mediatek.com>
> ---
> .../pinctrl/mediatek,mt8189-pinctrl.yaml | 217 ++++++++++++++++++
> 1 file changed, 217 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml
> new file mode 100644
> index 000000000000..43b6f15efad8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml
> @@ -0,0 +1,217 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8189-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT8189 Pin Controller
> +
> +maintainers:
> + - Lei Xue <lei.xue at mediatek.com>
> + - Cathy Xu <ot_cathy.xu at mediatek.com>
> +
> +description:
> + The MediaTek's MT8189 Pin controller is used to control SoC pins.
> +
> +properties:
> + compatible:
> + const: mediatek,mt8189-pinctrl
> +
> + reg:
> + items:
> + - description: gpio base
> + - description: lm group IO
> + - description: rb0 group IO
> + - description: rb1 group IO
> + - description: bm0 group IO
> + - description: bm1 group IO
> + - description: bm2 group IO
> + - description: lt0 group IO
> + - description: lt1 group IO
> + - description: rt group IO
> + - description: eint0 group IO
> + - description: eint1 group IO
> + - description: eint2 group IO
> + - description: eint3 group IO
> + - description: eint4 group IO
> +
> + reg-names:
> + items:
> + - const: base
> + - const: lm
> + - const: rb0
> + - const: rb1
> + - const: bm0
> + - const: bm1
> + - const: bm2
> + - const: lt0
> + - const: lt1
> + - const: rt
> + - const: eint0
> + - const: eint1
> + - const: eint2
> + - const: eint3
> + - const: eint4
> +
> + interrupts:
> + description: The interrupt outputs to sysirq.
Drop
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + const: 2
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + description:
> + Number of cells in GPIO specifier, should be two. The first cell is the
> + pin number, the second cell is used to specify optional parameters which
> + are defined in <dt-bindings/gpio/gpio.h>.
Drop the 1st sentence.
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + gpio-line-names: true
> +
> +# PIN CONFIGURATION NODES
> +patternProperties:
> + '-pins$':
> + type: object
> + additionalProperties: false
> +
> + patternProperties:
> + '^pins':
> + type: object
> + $ref: /schemas/pinctrl/pincfg-node.yaml
> + additionalProperties: false
> + description:
> + A pinctrl node should contain at least one subnode representing the
> + pinctrl groups available on the machine. Each subnode will list the
> + pins it needs, and how they should be configured, with regard to muxer
> + configuration, pullups, drive strength, input enable/disable and input
> + schmitt.
> +
> + properties:
> + pinmux:
> + description:
> + Integer array, represents gpio pin number and mux setting.
> + Supported pin number and mux varies for different SoCs, and are
> + defined as macros in arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
> + directly, for this SoC.
> +
> + drive-strength:
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +
> + bias-pull-down:
> + oneOf:
> + - type: boolean
> + - enum: [100, 101, 102, 103]
> + description: mt8189 pull down PUPD/R0/R1 type define value.
> + - enum: [75000, 5000]
> + description: mt8189 pull down RSEL type si unit value(ohm).
> + description: |
> + For pull down type is normal, it doesn't need add R1R0 define
> + and resistance value.
blank line between paragraphs or re-wrap the text.
> + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> + "MTK_PUPD_SET_R1R0_11" define in mt8189.
> + For pull down type is PD/RSEL, it can add resistance value(ohm)
> + to set different resistance by identifying property
> + "mediatek,rsel-resistance-in-si-unit". It can support resistance
> + value(ohm) "75000" & "5000" in mt8189.
No need to repeat values the schema says.
> +
> + bias-pull-up:
> + oneOf:
> + - type: boolean
> + - enum: [100, 101, 102, 103]
> + description: mt8189 pull up PUPD/R0/R1 type define value.
> + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 75000]
> + description: mt8189 pull up RSEL type si unit value(ohm).
> + description: |
> + For pull up type is normal, it don't need add R1R0 define
> + and resistance value.
> + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> + "MTK_PUPD_SET_R1R0_11" define in mt8189.
> + For pull up type is PU/RSEL, it can add resistance value(ohm)
> + to set different resistance by identifying property
> + "mediatek,rsel-resistance-in-si-unit". It can support resistance
> + value(ohm) "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
> + "75000" in mt8189.
No need to repeat values the schema says.
> +
> + bias-disable: true
> +
> + output-high: true
> +
> + output-low: true
> +
> + input-enable: true
> +
> + input-disable: true
> +
> + input-schmitt-enable: true
> +
> + input-schmitt-disable: true
> +
> + required:
> + - pinmux
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - '#interrupt-cells'
> + - gpio-controller
> + - '#gpio-cells'
> + - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/mt65xx.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #define PINMUX_GPIO51__FUNC_SCL0 (MTK_PIN_NO(51) | 2)
> + #define PINMUX_GPIO52__FUNC_SDA0 (MTK_PIN_NO(52) | 2)
> +
> + pio: pinctrl at 10005000 {
> + compatible = "mediatek,mt8189-pinctrl";
> + reg = <0x10005000 0x1000>,
> + <0x11b50000 0x1000>,
> + <0x11c50000 0x1000>,
> + <0x11c60000 0x1000>,
> + <0x11d20000 0x1000>,
> + <0x11d30000 0x1000>,
> + <0x11d40000 0x1000>,
> + <0x11e20000 0x1000>,
> + <0x11e30000 0x1000>,
> + <0x11f20000 0x1000>,
> + <0x11ce0000 0x1000>,
> + <0x11de0000 0x1000>,
> + <0x11e60000 0x1000>,
> + <0x1c01e000 0x1000>,
> + <0x11f00000 0x1000>;
> + reg-names = "base", "lm", "rb0", "rb1", "bm0" , "bm1",
> + "bm2", "lt0", "lt1", "rt", "eint0", "eint1",
> + "eint2", "eint3", "eint4";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 182>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
> + #interrupt-cells = <2>;
> +
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO51__FUNC_SCL0>,
> + <PINMUX_GPIO52__FUNC_SDA0>;
> + bias-disable;
> + };
> + };
> + };
> --
> 2.45.2
>
More information about the Linux-mediatek
mailing list